• Composites Research
• /
• v.13 no.3
• /
• pp.30-37
• /
• 2000

The dynamic properties of short-fiber reinforced Chloroprene rubber have been studied as functions of interphase conditions and fiber content. The loss factor generally decreased with fiber content and showed different patterns according to interphase conditions. The better interphase condition showed the lower loss modulus, $E_2$. Also, the dynamic ratio decreased with fiber content and rapidly decreased in the case of double coatings, i.e., model C. Therefore, the short-fiber reinforced rubber could have the better isolation in frequency ratio($\sqrt{2}$ min.) compared to frequency ratio($\sqrt{2}$ max.). And we have investigate the possibility of applying short-fiber reinforced rubber to automotive engine mount.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.475-476
• /
• 2009

This study investigates fundamental and spalling resistance properties of high strength concrete, W/B 28%, designed with the various diameters and contents of PET fiber. The flowability and compressive strength showed similar tendency in the range of below 0.05vol.% of fiber content. For the spalling resistance properties after fire test, the specimens with 40${\mu}m$ diameters of fiber did not spall at 0.05vol.% of fiber content. And the specimens with 20${\mu}m$ diameters of fiber did not spall even at 0.03vol.% of fiber content.

• Composites Research
• /
• v.20 no.6
• /
• pp.28-33
• /
• 2007

The puncture properties of short-fiber reinforced rubber were investigated as functions of fiber aspect ratio(AR: length of fiber/diameter of fiber), fiber content, specimen size and testing velocity. The puncture stresses of the matrix and short-fiber reinforced rubber decreased with specimen size, and increased with testing velocity at same specimen size. As the fiber AR increased the puncture stress at given fiber content also increased. The problem of the specimen shape was investigated by the comparison of the tensile strength with puncture stress. The forces acting in the membrane wall of the matrix and the short-fiber reinforced rubber showed a similar data regardless of specimen size. And those increased with testing velocity at same specimen size. As the fiber AR increased the force acting in the wall at given fiber content also increased. Overall, it was found that the specimen size, testing velocity had an important effects on the puncture properties.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.3
• /
• pp.73-80
• /
• 1999

The objective of this study were to investigate the properties and to improve the disadvantages of the polymer concrete such as brittle fracture, large hardening shrinkage . In this paper, steel fiber reinforced polymer concrete is prepared with various steel fiber aspect ratios(ι/d), contents(vol.%), and their material characteristics were investigated experimentally . The aspect ration (ι/d) of the steel fiber was reversly proportional to slump value, and slump value tended to decrease as increase of steel fiber content . And harding shrinkage and impact resistance tended to be improved as the steel fiber content and aspect ration were increased.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1151-1156
• /
• 2003

The dynamic properties of short-fiber reinforced Chloroprene rubber for vibration isolators have been studied as functions of interphase conditions and fiber content. The loss factor showed the maximum at strain amplitude 2%, and increased 0.09 for matrix, 0.05 for reinforced rubber with increasing frequency respectively. The dynamic ratio rapidly decreased with increasing strain amplitude, and some increased with increasing frequency. The better interphase condition showed the lower dynamic ratio. Therefore, the short-fiber reinforced rubber could have the better isolation in frequency ratio(${\sqrt{2}}min$.) compared to frequency ratio(${\sqrt{2}}max$.). And we have investigate the possibility of applying short-fiber reinforced rubber to automotive engine mount.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.24-30
• /
• 2011

The accelerated aging characteristics of electroconductive papers manufactured with a mixture of carbon fiber were investigated by heating in dry oven. By accelerated aging time, the tensile strength, tensile stretch of the papers were decreased more slowly with increase of carbon fiber content, but the electrical conductivity was more rapidly decreased in case of high carbon fiber content. The weight loss of papers by thermal analysis were reduced as increasing the carbon fiber content. These results were indicated that the electrical conductivity of carbon fiber was diminished easily by heat aging, but thermal characteristic of carbon fiber was much better than that of wood pulp.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.536-539
• /
• 1999

Physical properties of glass fiber-reinforced nylon 6,6 and ionomer blends were investigated in variation of ionomer and glass fiber content. With the increase of ionomer content, tensile strength, impact strength and flexural strength decreased, whereas increasing glass fiber content, these properties were improves. Both permittivity and tan $\delta$ remain unchanged. Space charge distribution was investigated by PEA (Pulsed electroacoustic) method. Heterocharge was found in nylon 6,6 and 히ass fiber composites, whereas composites, whereas when ionomer is blended.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.3
• /
• pp.99-107
• /
• 1965

Thirteen varieties of hemp, Cannabinus sativa L., consisting of four Italian, one Japanese and eight local varieties were used in the study on the fiber content and a satisfactory selection for the higher-fiber-yielding plants. In addition, the relationship among fiber contents at the ball setting stage, and at the maturity stage, primary fiber content, and total fiber content were determined. The results of the study are summarized as follow: 1. Fiber weight of the matured male plant expressed as percentage of the fiber weight to dried stems varied from 12.09 to 26.71 percent for the Italian varieties, 14.25% for the Japanese variety and ranged from 6.59 to 16.79 for the local varieties. It was shown that on the average, Italian varieties contained more fiber compared with the other varieties. 2. On the same basis, the average percent age of fiber for Italian male plants was 20.77 while it was 20.96 for female plants. For the Japanese variety, similar figures were 14.24 for male plants and 15.43 for female plants. By comparison, the average percent fiber for the male plants of Korean varieties was only 10.34 but averaged 16.79 for female plants. In this experiment, female plants contained a greater percentage of fiber than male plants. 3. Statistically significant correlations were obtained between fiber content at the ball setting stage and fiber content of the mature plant. The correlation coefficient was r=0.942＊＊, while the regression equation was Y=0.28+1.03X. These data indicate that plant. selection by early testing at the ball setting stage is an effective method for the improvement of fiber content. 4. The correlation between primary fiber content and total fiber content was r=0.913＊＊, with a regression equation of Y=12.01+1.20X. It should thus be possible to obtain plants of higher total fiber content at maturity by the selection of plants which have a higher content of primary fiber at the ball setting stage. 5. From a study of the transverse sections from the hemp plant it was shown that Italian varieties have wide bands of primary and secondary fibers with narrow areas of woody material, while both Korean local varieties and Japanese varieties have narrow bands of primary and secondary fiber and wide areas of woody material. For hemp improvement, it is certain that a variety which has a narrow area of woody substances and wide area of fiber in its stem should be selected.

• Composites Research
• /
• v.20 no.5
• /
• pp.13-19
• /
• 2007

Fiber-reinforced thermoplastic composites not only approach almost near to the strength of thermosetting composite but also has excellent productivity, recycling property, and impact resistance, which are pointed as weaknesses of thermosetting composites. The study for strength calculation of one direction fiber-reinforced thermoplastic composites and the study measuring precisely fiber orientation distribution were presented. Need the systematic study for the data base that can predict mechanical properties of composite material and fiber orientation distribution by the fiber content ratio was not constructed. Therefore, this study was investigated what affect the fiber content ratio and fiber orientation distribution have on the strength of composites. Fiber-reinforced thermoplastic composites by changing fiber orientation distribution and the fiber content ratio were made. Tensile strength ratio of $0^{\circ}$ direction of fiber-reinforced composites increased being proportional the fiber content and fiber orientation function as change from isotropy(J=0) to anisotropy(J=1). But, tensile strength ratio of $90^{\circ}$ direction by separation of fiber filament decreased when tensile load is imposed fur width direction of reinforcement fiber length direction.

• Journal of Nutrition and Health
• /
• v.29 no.1
• /
• pp.89-96
• /
• 1996

This study was conducted to analyze dietary fiber content of 113 common Korean foods. Content of total dietary fiber(TDF) in vegetables, mushrooms, fruite, and seaweeds was determined by enzymatic-gravimetric method developed by Prosky et al. and adopted by AOAC. The average TDF content of the foods analyzed was 3.62$\pm$2.09% for green vegetables, 5.90$\pm$7.61% for light vegetables, 14.27$\pm$18.11% for mushrooms, 3.02$\pm$4.48% for fruits, and 11.39$\pm$12.68% for seaweeds. The foods containing the highest TDF values in the food groups were boiled radish leaves(10.84%) in green vegetables, dried braken(38.36%) in light vegetables, dried juda's ear(18.18%) in mushrooms except dried manna lichen(52.87%), dried persimon(17.73%) in fruits and dried sea mustard(37.77%) in seaweeds. Dried Seaweeds such as sea mustard (37.77%), sea tangle(29.30%), and laver(31.36%) were good sources of dietary fiber. When we consider the health and therapeutic benefits of dietary fiber, it is recommended to continue to consume traditional Korean diet which are mainly composed of vegetables rather than animal foods and to increase consumption of dried mushrooms and seaweeds which contain high content of TDF.