• Steel and Composite Structures
• /
• 제28권4호
• /
• pp.495-508
• /
• 2018

In this paper, the effect of matrix cracks on the buckling of a hybrid laminated plate is investigated. The plate is composed of carbon nanotube reinforced functionally graded (CNTR-FG) layers and conventional fiber reinforced composite (FRC) layers. Different distributions of single walled carbon nanotubes (SWCNTs) through the thickness of layers are considered. The cracks are modeled as aligned slit cracks across the ply thickness and transverse to the laminate plane, and the distribution of cracks is assumed statistically homogeneous corresponding to an average crack density. The first-order shear deformation theory (FSDT) is employed to incorporate the effects of rotary inertia and transverse shear deformation, and the meshless kp-Ritz method is used to obtain the buckling solutions. Detailed parametric studies are conducted to investigate the effects of matrix crack density, CNTs distributions, CNT volume fraction, plate aspect ratio and plate length-to-thickness ratio, boundary conditions and number of layers on buckling behaviors of hybrid laminated plates containing CNTR-FG layers.

• Advances in materials Research
• /
• 제8권4호
• /
• pp.337-359
• /
• 2019

Shape Memory Polymer Composites (SMPC) have gained popularity over the last few decades due to its flexible shape memory behaviour over wide range of strains and temperatures. In this paper, non-linear bending analysis has been carried out for SMPC beam under the application of uniformly distributed transverse load (UDL). Simplified C⁰ continuity Finite Element Method (FEM) based on Higher Order Shear Deformation Theory (HSDT) has been adopted for flexural analysis of SMPC. The numerical solutions are obtained by iterative Newton Raphson method. Material properties of SMPC with Shape Memory Polymer (SMP) as matrix and carbon fibre as reinforcements, have been calculated by theory of volume averaging. Effect of temperature on SMPC has been evaluated for numerous parameters for instance number of layers, aspect ratio, boundary conditions, volume fraction of carbon fiber and laminate stacking orientation. Moreover, deflection profile over unit length and behavior of stresses across thickness are also presented to elaborate the effect of glass transition temperature (T_g). Present study provides detailed explanation on effect of different parameters on the bending of SMPC beam for large strain over a broad span of temperature from 273-373K, which encompasses glass transition region of SMPC.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.95-106
• /
• 1992

강섬유의 형태가 콘크리트의 휨거동에 미치는 영향을 알아 보기 위하여 5종의 강섬유를 사용한 실험을 실시하였다. 강섬유 혼입율은 1~2%로 변화를 주었고 전단 스팬비와 철근비는 고정하였다. 형태가 다른 강섬유의 보강 효과를 비교 분석하기 위한 방법으로 섬유 보강 효과 지수를 채택하였고, 인성 효과를 분석하기 위하여 유효 인성 지수를 제안하였으며, 이들 지수들은 강섬유 보강 효과를 비교 분석하는데 유용한 방법으로 평가되었다. 실험 결과에 의하면 강섬유 혼입율은 양단이 hook 형태인 강섬유의 경우에는 1% 이내가 효과적이며, dog bone 형태인 강섬유는 1~2%, 기타 강섬유는 2% 정도가 적절하였다. 강섬유의 혼입으로 인한 휨강도 및 파괴인성의 증진 효과는 무근 콘크리트보의 경우가 철근 콘크리트보의 경우보다 크게 나타났다. 또한 강섬유의 형태에 의한 휨강도와 인성의 증진 효과는 양단이 hook나 dog bone(paddled)형태의 강섬유가 섬유 혼입율이 상대적으로 낮음에도 straight나 crimped 및 wavy 형태보다 우수한 것으로 판명되었다.

• 대한토목학회논문집
• /
• 제26권2A호
• /
• pp.401-409
• /
• 2006

본 연구에서는 고강도 강섬유보강 콘크리트(HSFRC)의 설계 및 시공을 위한 기초 자료를 제공하기 위하여 역학적 특성 및 장기변형 특성에 관한 연구를 수행하였으며, 탄성계수, 압축강도, 인장강도, 휨강도, 건조수축 및 크리프에 미치는 강섬유 혼입의 영향을 검토하고, 휨파괴인성을 평가하였다. 연구결과, HSFRC의 압축강도에 미치는 강섬유의 혼입효과는 그다지 크지 않았고, 탄성계수는 섬유혼입률이 증가함에 따라 증가하는 것으로 나타났으며, 인장강도, 휨강도 및 휨인성에 미치는 섬유혼입률($V_f$) 및 섬유형상비($l_f/d_f$)의 영향은 대단히 큰 것으로 나타났다. 이는 $V_f$ 및 $l_f/d_f$의 증가와 함께 극한하중에 상응하는 처짐량이 증가하고, 강섬유의 균열구속성능에 의해 하중-처짐곡선의 하강곡선이 완만하게 감소하기 때문인 것으로 판단된다. 또한 크리프 및 건조수축에 미치는 섬유혼입률($V_f$)의 영향은 대단히 큰 것으로 나타났으며, 특히 고강도 콘크리트에 강섬유를 혼입하면 크리프 변형에 비해 건조수축 변형의 저감에 더욱 효과가 큰 것으로 나타났다.

• Computers and Concrete
• /
• 제25권5호
• /
• pp.479-484
• /
• 2020

This work performed to analyses the impact of hooked end steel fibres on the mechanical properties of high performance concrete. The mechanical properties considered incorporate compressive strength, split tensile strength and flexural strength. Taking in to thought parameters, such as, volume fraction of fibres, fibre aspect ratio and grade of concrete, a logical strategy called Taguchi technique was utilized to discover the ideal blend of factors. L9 Orthogonal Array (OA) of Taguchi network comprising of three variables and three dimensions is utilized in this work. The evaluations of concrete considered were M60, M80 and M100. M60 contained 15% of metakaolin as bond swap though for M80 it was 5% of metakaolin and for M100 it was 10% metakaolin and 10% of silica smolder. The volume portion of fiber was fluctuated by 0.5%; 1% and 1.5% and the viewpoints proportions considered were 50, 60 and 80. The test outcomes demonstrate that incorporation of steel fibres enhance significantly the the strength characteristics of concrete, predominantly the splitting tensile strength and flexural strength. In light of relapse investigation of the test information scientific models were produced for compressive strength, split tensile strength and flexural strength of the steel fibre-reinforced high performance concrete.

• Computers and Concrete
• /
• 제25권3호
• /
• pp.215-224
• /
• 2020

In the present study, according to the important of porosity in low specific weight in comparison of high stiffness of carbon nanotubes reinforced composite, buckling and free vibration analysis of sandwich composite beam in two configurations, of laminates using differential quadrature method (DQM) is studied. Also, the effects of porosity coefficient and three types of porosity distribution on critical buckling load and natural frequency are discussed. It is shown the buckling loads and natural frequencies of laminate 1 are significantly larger than the results of laminate 2. When configuration 2 (the core is made of FRC) and laminate 1 ([0/90/0/45/90]_s) are used, the first natural frequency rises noticeably. It is also demonstrated that the influence of the core height in the case of lower carbon volume fractions is negligible. Even though, when volume fraction of fiber increases, the critical buckling load enhances smoothly. It should be noticed the amount of decline has inverse relationship with the beam aspect ratio. Investigating three porosity patterns, beam with the distribution of porosity Type 2 has the maximum critical buckling load and first natural frequency. Among three elastic foundations (constant, linear and parabolic), buckling load and natural frequency in linear variation has the least amount. For all kind of elastic foundations, when the porosity coefficient increases, critical buckling load and natural frequency decline significantly.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.925-928
• /
• 2008

최근 내진부재 및 기존 구조물의 내진보강요소의 손상제어(Damage tolerance)성능을 충족할 수 있는 변형경화형 시멘트 복합체(Strain-hardening cement composites, SHCC)의 개발 및 활용 연구가 진행 중이며, 하이브리드화에 따른 경제성 및 성능향상 가능성도 보고되고 있다. 그러나 이러한 우수한 성능을 갖는 SHCC 재료가 실구조물의 보수/보강재 및 내진보강부재에 적용되기 위해서는 우수한 인장성능 발현뿐만 아니라, 보강섬유의 단가를 고려한 경제적 효과(Economical efficiency) 및 시공성 (Workability)이 요구된다. 따라서 본 연구에서는 SHCC를 내진부재 및 보강재료로써 적용하기 위한 연구의 일환으로 합성섬유를 하이브리드하여 혼입시 휨 및 인장강도, 변형능력 등 거동특성을 분석함으로써 각 보강섬유의 인장강도 탄성계수 등 기계적 특성과 혼입율에 따른 재료성능과의 상관관계를 비교 분석하여 평가하고자 한다. 또한 물시멘트비를 변수로 하여 시멘트 복합체의 강도특성과 보강섬유의 부착특성 및 균열제어성능을 규명하고자 한다. 이러한 결과를 근거로 향후 SHCC 재료의 실구조물 적용시 요구성능 및 경제성을 고려한 재료배합에 관한 기초자료를 제시하고자 한다.

• Advances in nano research
• /
• 제8권1호
• /
• pp.59-68
• /
• 2020

In the present study, buckling analysis of sandwich composite (carbon nanotube reinforced composite and fiber reinforced composite) Euler-Bernoulli beam in two configurations (core and layers material), three laminates (combination of different angles) and two models (relative thickness of core according to peripheral layers) using differential quadrature method (DQM) is studied. Also, the effects of porosity coefficient and different types of porosity distribution on critical buckling load are discussed. Using sandwich beam, it shows a considerable enhancement in the critical buckling load when compared to ordinary composite. Actually, resistance against buckling in sandwich beam is between two to four times more. It is also showed the critical buckling loads of laminate 1 and 3 are significantly larger than the results of laminate 2. When Configuration 2 is used, the critical buckling load rises about 3 percent in laminate 1 and 3 compared to the results of configuration 1. The amount of enhancement for laminate 3 is about 17 percent. It is also demonstrated that the influence of the core height (thickness) in the case of lower carbon volume fractions is ignorable. Even though, when volume fraction of fiber increases, differences grow smoothly. It should be noticed the amount of decline has inverse relationship with the beam aspect ratio. Among three porosity patterns investigated, beam with the distribution of porosity Type 2 (downward parabolic) has the maximum critical buckling load. At the end, the first three modes of buckling will be demonstrated to investigate the effect of spring constants.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.529-541
• /
• 2017

In the present study, vibration analysis of functionally graded carbon nanotube reinforced composite (FGCNTRC) plate moving in two directions is investigated. Various types of shear deformation theories are utilized to obtain more accurate and simplest theory. Single-walled carbon nanotubes (SWCNTs) are selected as a reinforcement of composite face sheets inside Poly methyl methacrylate (PMMA) matrix. Moreover, different kinds of distributions of CNTs are considered. Based on extended rule of mixture, the structural properties of composite face sheets are considered. Motion equations are obtained by Hamilton's principle and solved analytically. Influences of various parameters such as moving speed in x and y directions, volume fraction and distribution of CNTs, orthotropic viscoelastic surrounding medium, thickness and aspect ratio of composite plate on the vibration characteristics of moving system are discussed in details. The results indicated that thenatural frequency or stability of FGCNTRC plate is strongly dependent on axially moving speed. Moreover, a better configuration of the nanotube embedded in plate can be used to increase the critical speed, as a result, the stability is improved. The results of this investigation can be used in design and manufacturing of marine vessels and aircrafts.

• 한국농공학회지
• /
• 제20권2호
• /
• pp.4645-4687
• /
• 1978

This study was attempted to investigate the mechanical properties of concrete and crack control effects of reinforced concrete with steel and glass fiber. The experimental program includes tests on the properties of fresh concrete containing fibers, compressive strength, tensile strength, flexural strength, Young's modulus, Shrinkage and deformation of steel or glass fiber reinforced concrete. Also this study was carried out to investigate the effect of steel or glass fiber to retard the development in reinforced concrete subject to uniaxial tension and thus facilitate the use of steels of higher strength. The major conclusions that can be drawn from the studies are as follows: 1. The effect of the fibers in various mixes on fresh concrete confirmed that fibers do have a significant effect on the properties of fresh concrete, bringing much more stable and exhibiting a signiflcant reduction in surface bleeding, and that the cohesion is greatly improved and the internal resistance increases with fiber concentration. But the addition of an excess contents and length of fibers brings about the reduction of workability. 2. With the addition of steel fibers(1.5% Vol.) to concrete, the compressive strength as compared with plain concrete showed a very slight increase, but excess addition, over 1.5% Vol. of steel and glass fiber reduced its strength. 3. Splitting tensile strength of fiber reinforced concrete showed a significant increase tendency, as compared with plain concrete. In case of containing steel fiber (2.5%, 30mm), it showed that the maximum increase rate of 1.48 times as much rate, and in case of containing glass fiber (2.5%, 30mm), the increase rate of strength was 1.25 times as much rate. 4. Flexural strength of fiber reinforced concrete showed a significant tendency, as compared with plain concrete. Containing steel fiber (2.5%, 30mm) showed the maximum increase rate of 1.64 times as much rate and containing glass fiber (2.5%, 30mm) showed the increase rate of strength of 1.32 times as much rate, and in general, the 30mm length brougth the best results. 5. The strength ratio ($\sigma$b/$\sigma$c and $\sigma$t/$\sigma$c) increased, when steel fiber's average spacing was up to 3.05mm, but decreased when beyond 3.05mm, and it was confirmed that tensile or flexural strengths of steel fiber reinforced concrete are apparently governed by fiber's average spacing. 6. The compressive strain of fiber reinforced concrete showed a significant increasing tendency as the fiber was added, but Young's modulus. with the addition of steel and glass fibers, showed a slight decrease tendency. And according to the increase of flexural strength, a considerable increase was seen in toughness. 7. With the addition of fiber's the shrinkage of concrete was significantly decreased, in both case of adding steel fibers 12.5%, 30mm, and showed a significant decrease ratio, in average 30.4% and 36.7%, as compared with plain concrete. 8. With the increase of fiber volume fraction and length, the gained stress in reinforcing bar in concrete specimens increased in all crack widths, but at different rates, with the decrease of fiber diameter, the stress showed a considerable increasing tendency. And the duoform steel fibers showed the greatest improvement, as compared with the other types tested. 9. The influence of fiber dimensions in order of significanse on the machanical properties of concrete and the crack control of reinforced concrete was explained as follows: content, length, aspect ratio and dimeter.