• Toxicological Research
• /
• v.26 no.3
• /
• pp.233-236
• /
• 2010

The analytical in vivo chromium ion was searched for using a voltammetric hollow-fiber dialysis sensor via square wave stripping voltammetry (SW), cyclic voltammetry (CV), and chronoamperometry. Under optimum parameters, the analytical results indicated linear working ranges of 50~400 mg/l CV and $10{\sim}80\;{\mu}g/l$ SW within a 30-sec accumulation time. The analytical detection limit (S/N) was $6.0\;{\mu}g/l$. The developed method can be applied to in vivo tissues and in ex vivo toxicity assay, as well as to other materials that require chromium analysis.

• Annals of Clinical Neurophysiology
• /
• v.10 no.1
• /
• pp.33-37
• /
• 2008

Diabetic polyneuropathy (DPN) is the most common form of diabetic neuropathy, and causes a significant morbidity with an impact on the quality of life in the patients with diabetes. Since DPN frequently induces foot deformity and ulceration, which finally leads to foot amputation, the early detection and treatment is very important for the prevention of a permanent structural change. In the early stage of DPN, the diagnostic methods which can evaluate the function or structure of small nerve fibers should be employed because small nerve fibers are first involved in the course of DPN. However, the nerve conduction study cannot reflect the function of the small nerve fibers, and thus, has a definite limitation in the early diagnosis of DPN. For the early detection of DPN, electrodiagnostic data should be interpreted on a clinical context, along with the careful evaluation of the small nerve fiber functions using the tests such as the analysis of intraepidermal nerve fiber density.

• Structural Engineering and Mechanics
• /
• v.68 no.2
• /
• pp.215-226
• /
• 2018

In this article, the theory of fractional order two temperature generalized thermoelasticity is employed to study the wave propagation in a fiber reinforced anisotropic thermoelastic half space in the presence of moving internal heat source. The whole space is assumed to be under the influence of gravity. The surface of the half-space is subjected to an inclined load. Laplace and Fourier transform techniques are employed to solve the problem. Expressions for different field variables in the physical domain are derived by the application of numerical inversion technique. Physical fields are presented graphically to study the effects of gravity and heat source. Effects of time, reinforcement, fractional parameter and inclination of load have also been reported. Results of some earlier workers have been deduced from the present analysis.

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.470-475
• /
• 1996

Fiber-textured diamond films have been deposited on scratched silicon(100) substrate by micro wave .plasma enhanced chemical vapor deposition at the condition of micro wave power : 950 W, pressure : 60 torr, H$_{2}$ gas flow rate : 50 sccm, CH$_{4}$ gas flow rate : 1.5 sccm, substrate temperature : about 900.deg. C and deposition time : 20 hours. The films were characterized by mean of scanning electron microscopy, Raman spectroscopy and X-ray analysis.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1014-1019
• /
• 2004

The development of both economical and consistent structure is strongly required for the whole reorganization of the railway network in Korea. Retaining wall is one of the major structures in the vicinity of the railway, which needs improving its external appearance and stability. Therefore, this study presents a new type of retaining wall, so called short-fiber composite reinforced retaining wall, as an alternative of retaining walls, which can be used for constructing the slope and roadbed soil structures. The results from real-scale test and dynamic numerical analysis for developed new one, which helps both the improvement of the external appearance and also the optimum use of the limited space near the railway, show excellent performance. On the basis of these results, it is judged that short-fiber composite reinforced retaining wall has the advantages of choosing the front wall freely and having a chance to use any low quality soil as backfill.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.4
• /
• pp.460-466
• /
• 1988

In this paper, the theory and experiments on the one-way optical image transmission through optical fiber by using degenerate four wave mixing in BSO single crystal are demonstrated. From the theoretical analysis, the diffraction efficiency of phase conjugate wave in BSO single crystal is greatly dependent on applied electric field intensity, diffraction grating period formed in the crystal and incident beam ratio, those are also in good agreement with the experimental results. Based on the experimental results, we have arranged the typical degenerate four wave mixing system in the optimal conditions (applied electric field, E. = 5kV/cm` diffraction grating period, 3\ulcorner` beam ratio of backward pump wave versus signal wave, 2.7) and realized one-way optical image transmission system through optical fiber using BSO single crystal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.105-109
• /
• 2001

The micro optical parts such as ferrules are required to be manufactured within very small tolerances, as the slight deviation of the tolerance would give very large amount of loss in communication efficiency. For efficient optical communication, outer diameter, fiber diameter, fiber separation and eccentricity are significant parameters to be inspected., Thus we developed an automatic inspection system to evaluate shape parameters of the optical fiber connectors(ferrule) upto submicron accuracy using machine vision. new optical probe of multi fields of views has been developed and the image processing and data analysis algorithms have been complemented in real time basis. The developed system is successfully used in the practical ferrule manufacturing industry, and about 0.1$\mu\textrm{m}$ accuracy can be obtained with very fast inspection time.

• The Korean Journal of Rheology
• /
• v.8 no.2
• /
• pp.78-91
• /
• 1996

단섬유 보강 플라스틱 복합재료에 사출성형에서 섬유배향은 금형 충전 공정 중의 유동장에 의해 결정되고 섬유의 배향 상태는 역으로 유동장에 영향을 미친다. 단섬유에 의 한 추가적인 응력을 포함하는 Dinh과 Armstrong의 이방성 구성방정식을 충전유동과 섬유 배향의 연계해석에 도입하였다. 충전유동의 해석은 새로운 압력 지배방정식과 에너지 방정 식을 유한요소법과 유한차분법을 이용하여 풀고 동시에 2차 배향 텐서의 변화방정식을 4차 Runge-kutta 방법으로 풀었다. 섬유의 배향상태를 구한 후에 일방향성 복합재료의 Halpin-Tsai 식과 배향 평균모델을 도입하여 사풀성형품의 이방성 기계적 성질이 예측되었 다. 직사각형 캐비티에서 수치해석결과를 실험결과와 비교하였다. 섬유배향과 유동과의 상호 연계작용을 특히 게이트 근처에서 섬유배향에 영향을 미치며 수치해석 결과는 벽면 근처에 서 유동방향으로 배향하는 shell층을 과대 예측함을 알수 있었는데 이는 배향 텐서 변화 방 정식의 최종근사에서 기인하는 오차로 판단된다. 수정된 복합최종 근사를 바탕으로 예측된 이방성 기계적 성질이 기존의 복합최종 근사에 기초한 예측보다 실험 결과에 정량적으로 보 다 잘 일치하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.671-676
• /
• 2000

This study was to determine the technical feasibility of using wastepaper fibers, obtained through dry processing of wastepaper, as reinforcement in thin cement produces. Dry-processed waste papers have high levels of noncellulosic impurities, and the recycling process also breads and damages the fibers. To produce wastepaper fiber-cement composites, first the influential variables in the slurry-dewatering method of processing the composites were identified in an experimental study based on factorial design. Among the proportioning and processing variables investigated, fiber mass fraction and level of substitution of virgin fibers with recycled ones were found to have statistically significant effects on mechanical and physical properties of composites. Subsequently, response surface analysis techniques were used to devise an experimental program that helped determine the optimum combinations of the selected influential variables based on mechanical and physical properties, and cost.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.161-164
• /
• 2005

The flexural behavior of a strengthened beam, that is a reinforced. concrete beam with externally bonded fiber sheets, was theoretically and experimentally investigated. The effects of the amount of glass fiber sheets varying from 1 to 4 plies on the flexural capacity of the strengthened beam are also examined. The flexural rigidity of the strengthened beam was enhanced compared with RC beam. In addition, the failure mode and load-deflection relationship for the strengthened beam and the comparison of analysis with experiment are extensive investigated. Finally, the determination of the nominal moment capacity $M_n$ of the strengthened beam will be discussed