• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1981-1989
• /
• 2008

Different people buy the same or similar products for different reasons. Benefit segmentation attempts to understand these differences by grouping together people who assign a similar level of importance to the same attributes. We focused on identifying market segments for knit fabrics by comparing the relative attribute preference for knit fabrics according to segmented clusters, and testing to establish if there were significant differences between the preferences of clusters. Three consumer segments emerged, and there were three clusters with different ideal knit profiles: a preferred wool group, a preferred acrylic group, and a preferred long stitch length group. The preferred wool group and the preferred acrylic group rated the mixture ratio as the main attribute that determined their preference, followed by the stitch length. The preferred long stitch length group considered stitch length as being the most important attribute, followed by the mixture ratio. The difference in the preferences for the mixture ratio and stitch length of knit fabrics was the highest between the three clusters, The preferred wool group preferred a knit fabric that has a greater wool mixture ratio and a short stitch length, and the preferred acrylic group and long stitch length group preferred a knit fabric that had a higher acrylic mixture ratio and a short stitch length.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1915-1926
• /
• 2008

Although we know that images of a country or an industry are influential factors in product evaluation, there has been little discussion about the channels through which consumers form a country or an industry image. Guided by the assumption that the image of the Korean fashion industry conveyed through U.S. media will likely affect the evaluation of Korean fashion products, we decided to examine articles published between January 1998 and June 2008 in Woman's Wear Daily(WWD), a prestigious U.S. daily trade newspaper covering all aspects of the national and international fashion business. By using the "Korean", we found 329 relevant articles. Through content analysis, we identified the aspects of the Korean fashion industry that have been considered salient to U.S. fashion media professionals. We set up categories based on the contents of the articles that discussed segments of the supply chain of the fashion industry. We found more comments on the Korean fashion industry as fiber and fabrics supplier or apparel manufacturer than in any other categories, which reflects that South Korea has been traditionally one of the most attractive sourcing countries for the U.S. fashion business. We identified significantly less coverage on the designing, branding, marketing, and retailing aspects of the Korean fashion industry. Due to economic boom in Korea, the country's fashion industry is recognized as having a highly fashion-conscious market that can afford the world's premium brands. However, the industry is viewed as being rather vulnerable to changes in the macro economic environment.

• Composites Research
• /
• v.18 no.6
• /
• pp.9-18
• /
• 2005

With the wide applications of fiber-reinforced composite material in aero-structures and mechanical parts, the design of composite joints have become a very important research area because the joints are often the weakest areas in composite structures. This paper presents an analytical study of the stress distributions in mechanically single-fastened and multi-fastened composite laminates. The finite element models which treat the pin and hole contact problem using a contact stress analysis are described. A dimensionless stress concentration factor is used to compare the stress distributions in composite laminates quantitatively In the case of single-pin loaded composite laminate, the effects of stacking sequence, the ratio of a hole diameter and the width of a laminate (W/D ratio), the ratio of hole diameter and distance from edge to hole (E/D ratio), friction coefficient and clamping force are considered. In the case of multi-pin loaded composite laminate, the influence of the number of pins, pitch distance, number of rows, row spacing and hole pattern are considered. The results show that P/D ratio and E/D ratio affect more on stress distributions near the hole boundary than the other factors. In the case of multi-pin loaded composite laminate, the stress concentration in the double column case is better than the other cases of multi-pin loaded composite laminate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.788-794
• /
• 2020

This study was measured and analyzed from January to November 2019 to confirm the effect that Abietic acid, an asthma-causing substance, which can be exposed to workers in the electronics industry, is removed by plasma treatment. The experiment was carried out using a solder wire and natural rosin. Air at temperatures of 250℃, 300℃, and 350℃ was collected with a glass fiber filter paper using an air sampler for 10 minutes at a flow rate of 2ℓ/min. An analysis of the collected samples was performed by pretreatment with methyl alcohol and quantitative analysis by high performance liquid chromatography (HPLC). This procedure confirmed that abietic acid was generated in both natural rosin and solder wires, and the quantum of abietic acid increased as the treatment temperature increased. The amount of abietic acid was higher in natural rosin than solder wire. As a result of plasma treatment, a removal efficiency of about 92% or more was confirmed in natural rosin. A peak of abietic acid was not detected in the solder wire. Therefore, a removal efficiency of 100% was confirmed. This study, confirmed that abietic acid, an asthma-trigger can be generated in solder wire and natural rosin, and can be removed by plasma treatment.

• The Korean Journal of Community Living Science
• /
• v.17 no.3
• /
• pp.143-158
• /
• 2006

The study examined nutritional conditions to enhance the quality of meals and to provide the basic data for more proper dietary life of college students. Our analysis was based on the body measurement, food intake and food habits for 200 students of Chung-Nam. The nutrient intake was examined using the 24-hour recall method. The data were analyzed by the Computer Aided Nutritional Analysis Program and then the diet quality was estimated using the Mean Adequacy Ratio(MAR), the Nutrient Adequacy Ratio(NAR) and the Index of Nutritional Quality(INQ). The average weight and height of male students were $67.57{\pm}8.66kg,\;174.64{\pm}5.87cm$, while those of female students were $53.46{\pm}6.86kg,\;159.10{\pm}4.19cm$, respectively. The total energy intake of the male students was $3221.71{\pm}200.39kcal$, while that of the female students was $1884.67{\pm}100.93kcal$. The male students are higher than female in % of RDA. The percentages of carbohydrate, protein and lipid for male students were $57.18{\pm}7.83%,\;15.15{\jpm}3.36%\;and\; 27.67{\pm}6.68%$, while those of female students were $58.77{\pm}7.68%,\;15.51{\pm}4.55%\;and\;25.72{\pm}6.20%$, respectively. There was no significant difference in calcium intakes for both groups, however they are less than the RDA. In terms of iron, the male students took $16.98{\pm}5.57mg$ and the female students took $11.35{\pm}2.68mg$, with significant difference (p<0.001). The male and female students showed sufficient intake of vitamins, with significant difference between two groups except for vitamin A. The mean MAR, an index of overall dietary quality, was significantly higher in the male students than female students(p<0.01). Male and female students enjoying two meals or more a day were 59%, and those having enough time for one meal or less a day were 36.5%. Male and female students having no breakfast were 39%. Male and female students having vegetables intake were 53.5%, and having milk or milk products every day were 29.5% of them. In conclusion, nutritional education is recommended to increase the calcium intake and fruit and vegetable consumption for dietary fiber, and to emphasize regularity of meal time.

• Composites Research
• /
• v.18 no.2
• /
• pp.20-29
• /
• 2005

To evaluate the flexural deformation and strength of composite motor case above the glass transition temperature$(T_g),\;170^{\circ}C$, of resin material, a finite element analysis(FEA) model in which material non-linearity and progressive failure mode were considered was proposed. The laminated flexural specimens which have the same lay-up and thickness as the composite motor case were tested by 4-point bending test to verify the validity of FEA model. Also. mechanical properties in high temperature were evaluated to obtain the input values for FEA. Because the material properties related to resin material were highly deteriorated in the temperature range beyond $T_g$, the flexural stiffness and strength of laminated flexural specimen in $200^{\circ}C$ were degraded by also $70\%\;and\;80\%$ in comparison with normal temperature results. Above $T_g$, the failure mode was changed from progressive failure mode initiated by matrix cracking at $90^{\circ}$ ply in bottom side and terminated by delamination at the center line of specimen to fiber compressive breakage mode at top side. From stress analysis, the progressive failure mechanism was well verified and the predicted bending stiffness and strength showed a good agreement with the test results.

• Composites Research
• /
• v.13 no.2
• /
• pp.30-39
• /
• 2000

It is difficult for civil engineer to apply composite materials of laminated type to structure for civil construction because of complicated theory although those have much merit. A simple method by which one can predict "exact" values of the natural frequency of vibration of laminated plates is presented. Many laminates with particular orientations have negligible values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}$ = $D_{26}$ ->0 can be solved by the same equation as for the special orthotropic laminates(1991,1995). If the quasi-isotrpic constants are used, It is possible to simplify analysis procedure since the equations for isotropic plates can be used. Use of some coefficients can produce "exact" values for laminates with such configuration. This coefficient, in fact, represents the effect of the anisotropy of the laminate. D. H. Kim proposed to use a correction factor, he developed, to produce "exact" solution out of the approximate solution obtained by using the quasi-isotropic constants(1995). In this paper, the fiber orienation studied is [$\alpha$/$\beta$/$\beta$/$\gamma$/$\alpha$/$\alpha$/$\beta$]r, with $\alpha$=-$\beta$, and $\gamma$${\gamma}$=$0^{\circ}$ or $90^{\circ}$ and the above-mentioned method is used to obtain the natural frequencies of plates with such orientations, and detailed result is presented for the use of engineers.nted for the use of engineers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1971-1978
• /
• 2009

This study investigated the adsorption of safflower yellow dye on wool protein fiber and the optimum dyeing conditions to test color reproducibility. In addition, the effects of mordants on dye adsorption, color, fastness, and photofading rate were also studied. The prepared dye in powder form was characterized with UV-vis spectroscopy and FT-IR spectrometric analysis. The color of dyed fabrics was characterized by CIE $L^*a^*b^*$ coordinates, H V/C, and K/S values. The color reproducibility of the dyed wool fabrics was examined. The amount of dye adsorption increased and also, the shade of the dyed wool fabrics became deeper and more saturated with increasing temperature, time, and dye concentration. The maximum color strength was obtained at pH 3.0. The shade of dyed wool fabrics ranged from light yellow to dark mustard yellow as the pH of the dye bath shifted from alkaline to acidic. Color reproducibility was reliable with color differences in the range of 0.53~1.75. Fastness to dry cleaning was relatively good at 4/5 rating irrespective of mordanting. Fe and Cu mordants showed the least color change of the dyed wool fabrics after exposure to light. Mordants did not contribute to improve dye uptake and color fastness, although they made variations in color tone. Safflower yellow dye can be used satisfactorily without mordants and will not cause damage to the environment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.117-124
• /
• 2001

This study was executed for utilizing it as basic data in appropriate recycling way and design by examining and analyzing various characteristics of food waste which is being discharged from various restaurant and apartment house. In general, there were differences in restaurants classification and Japanese restaurant showed big differences as compared to other restaurants. Vegetable had the highest composition and its contents had big difference according to seasons. In alien substances, oyster shells were the highest and restaurants showed high rate of alien substances than apartments, therefore it was required to divide them in advance. Salinity was the highest in Japanese restaurants and most restaurants had rate of up to 1%, so it was not appropriate for recycling. However, it was considered that if there is cleaning operation in the whole process, there might not be a problem. Feed Ingredient had 28% of fiber, 25% of protein, and 11% of fats. We analyzed noxious germs and heavy metal too. However microorganisms of etiological cause were not detected and each harmful material showed less values of control concentration. In the result of analysis of each characteristic, it is required to consider collection rate from restaurants and apartments and seasonal cause into design regarding recycling. And apartments are compatible to compost than feed and food waste from Chinese, flour restaurant and collective feeding facilities are compatible for feed, as it is evaluated.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.195-209
• /
• 2018

In this study, the characteristics of various raw hairs used for traditional Korean brushes were examined; further, the characteristics and deterioration patterns of Korean, Chinese, and Japanese brushes were compared, with a quantitative evaluation to assess the brush performance. The tensile strength was generally found to be higher with a greater fiber thickness. Among the hairs examined, the back and flank hair of goat was more damaged than that in other parts, and the tensile strength was low. Higher elasticity of the brush made with hair of high cysteine content was measured. Owing to deterioration by use of the brushes, artificial drying brushes had a higher yellowness index and lower tensile strength than natural drying brushes. Further, it was confirmed that brushes with good absorbency exhibited good consistency, but not good elasticity. Thus, the performance of the brush can be influenced by the kind of material used and the brush usage pattern. In addition, it is possible to identify the material science characteristics of brushes which have been produced only by experience; therefore, the results of this study could provide basic data for manufacturing brushes employed in conservation treatment, in the future.