• The Korea Journal of Herbology
• /
• v.37 no.6
• /
• pp.9-17
• /
• 2022

Objective : In modern society, liver diseases such as liver fibrosis are on the rise as inflammation and wound healing processes of the liver are repeated due to factors such as drinking, smoking, and stress. This study was conducted to evaluate the effect of Saenggangeonbi-tang (SGGBT) on thioacetamide (TAA)-induced liver fibrosis. Methods : The mice were divided into 4 groups for examination (n=6): Normal group (Nor), distilled water-treated liver fibrosis mice (Con), silymarin 50 mg/kg-treated liver fibrosis mice (Sily), SGGBT 200 mg/kg-treated liver fibrosis mice (S200). Liver fibrosis was established in the mice via TAA for 8 weeks (1 week 100 mg/kg, 2,3 weeks 200 mg/kg, 4-8 weeks 400 mg/kg, three times a week, intraperitoneal injection) and they were administered silymarin and SGGBT (every day, oral administration) with the TAA. Results : SGGBT significantly decreased the levels of aspartate aminotransferase, alanine aminotransferanse, ammonia, and myeloperoxidase in serum increased by liver fibrosis. As a result of confirming H&E and MT staining, it was confirmed that SGGBT reduced damage and inflammatory cell infiltration in liver tissue, and alleviated changes in collagen fiber deposition and histological fibrosis. Also, it was confirmed through PAS staining that it reduced glycogen deposition in liver tissue. In addition, SGGBT significantly decreased the NADPH oxidases as well as significantly modulated the expression of MMP-2 and TIMP-2. Conclusions : These results suggest that SGGBT regulates the expression of MMP/TIMP protein through inhibition of oxidative stress and alleviates liver fibrosis by reducing collagen and glycogen deposition in liver tissue.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.148-154
• /
• 2022

As the 4th industrial age approaches, the demand for semiconductors is increasing enough to be used in all electronic devices. At the same time, semiconductor technology is also developing day by day, leading to ultraprecision and low power consumption. Semiconductors that keep getting smaller generate heat because the energy density increases, and the generated heat changes the shape of the semiconductor package, so it is important to manage. The temperature change is not only self-heating of the semiconductor package, but also heat generated by external damage. If the package is deformed, it is necessary to manage it because functional problems and performance degradation such as damage occur. The package burn in test in the post-process of semiconductor production is a process that tests the durability and function of the package in a high-temperature environment, and heat dissipation performance can be evaluated. In this paper, we intend to review a new material formulation that can improve the performance of the adapter, which is one of the parts of the test socket used in the burn-in test. It was confirmed what characteristics the basic base showed when polyamide, a high-molecular material, and alumina, which had high thermal conductivity, were mixed for each magnification. In this study, functional evaluation was also carried out by injecting an adapter, a part of the test socket, at the same time as the specimen was manufactured. Verification of stiffness such as tensile strength and flexural strength by mixing ratio, performance evaluation such as thermal conductivity, and manufacturing of a dummy device also confirmed warpage. As a result, it was confirmed that the thermal stability was excellent. Through this study, it is thought that it can be used as basic data for the development of materials for burn-in sockets in the future.

• Analytical Science and Technology
• /
• v.35 no.4
• /
• pp.169-180
• /
• 2022

Tomato has a limited shelf life and is highly perishable due to its high moisture content. As fruit leather, is a traditional food of Nepal, it can be beneficial to move towards value addition and diversification of the traditional product. The main aim was to analyze the nutritional values and phytochemicals of the tomato pulp and prepared leather, and sensory evaluation of prepared tomato leather. Five samples A, B, C, D and E were prepared with 80:20, 72.5:27.5, 95:5, 87.5:12.5 and 65:35 fruit pulp: sugar ratio respectively. Analysis of raw tomato pulp and all the five samples was performed. Sensory quality of the product sample A was found superior to that of other samples but chemical and phytochemical properties of product sample C was found superior than that of other prepared samples. Therefore, we had two best products, in terms of sensory properties and in terms of nutritional properties. The best product on the basis of nutrients (sample C) had acidity (%), TSS (°Bx), pH, total ash content (%), crude protein (%), crude fat (%), crude fiber (%), carbohydrate (%), vitamin C (mg/100 g), total energy (Kcal/100 g), TPC (mg GAE/g of dry extract), TFC (mg QE/g of dry extract), DPPH scavenging activity (% of inhibition) and lycopene content (mg/100 g) was found to be 3.70.1, 20 ± 0.02, 3 ± 0.1, 2.30 ± 0.05, 2.69 ± 0.04, 0.87 ± 0.02, 5.46 ± 0.01, 69.68 ± 0.02, 25.17 ± 1.25, 297.31 ± 0.01, 85.35 ± 0.02, 65.39 ± 0.02, 59.23 ± 0.03 and 98.57 ± 0.02 respectively. A tasty and nutritious product of tomato, leather can be prepared which can be more appealing to the consumer.

• Food Science of Animal Resources
• /
• v.43 no.2
• /
• pp.232-244
• /
• 2023

We investigated the effects of different phosphate replacements on the quality of ground pork products cured with sodium nitrite or radish powder to determine their potential for achieving clean-label pork products. The experimental design was a 2×5 factorial design. For this purpose, the ground meat mixture was assigned into two groups, depending on nitrite source. Each group was mixed with 0.01% sodium nitrite or 0.4% radish powder together with 0.04% starter culture, and then processed depending on phosphate replacement [with or without 0.5% sodium tripolyphosphate; STPP (+), STPP (-), 0.5% oyster shell calcium (OSC), 0.5% citrus fiber (CF), or 0.5% dried plum powder (DPP)]. All samples were cooked, cooled, and stored until analysis within two days. The nitrite source had no effect on all dependent variables of ground pork products. However, in phosphate replacement treatments, the STPP (+) and OSC treatments had a higher cooking yield than the STPP (-), CF, or DPP treatments. OSC treatment was more effective for lowering total fluid separation compared to STPP (-), CF, or DPP treatments, but had a higher percentage than STPP (+). The STPP (+) treatment did not differ from the OSC or CF treatments for CIE L^* and CIE a^*. Moreover, no differences were observed in nitrosyl hemochrome content, lipid oxidation, hardness, gumminess, and chewiness between the OSC and STPP (+) treatments. In conclusion, among the phosphate replacements, OSC addition was the most suitable to provide clean-label pork products cured with radish powder as a synthetic nitrite replacer.

• Clinical and Experimental Reproductive Medicine
• /
• v.49 no.4
• /
• pp.259-269
• /
• 2022

Objective: Animal-free scaffolds have emerged as a potential foundation for consistent, chemically defined, and low-cost materials. Because of its good potential for high biocompatibility with reproductive tissues and well-characterized scaffold design, we investigated whether polyglycolic acid (PGA) could be used as an animal-free scaffold instead of natural fibrin-agarose, which has been used successfully for three-dimensional human endometrial cell culture. Methods: Isolated primary endometrial cells was cultured on fibrin-agarose and PGA polymers and evaluated various design parameters, such as scaffold porosity and mean fiber diameter. Cytotoxicity, scanning electron microscopy (SEM), and immunostaining experiments were conducted to examine cell activity on fabricated scaffolds. Results: The MTT (3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide) assay and SEM results showed that endometrial cells grew and proliferated on both scaffolds. Immunostaining showed cytokeratin and vimentin expression in seeded cells after 7 days of culture. On both scaffolds, an epithelial arrangement of cultured cells was found on the top layer and stromal arrangement matrix on the bottom layer of the scaffolds. Therefore, fibrin-agarose and PGA scaffolds successfully mimicked the human endometrium in a way suitable for in vitro analysis. Conclusion: Both fibrin-agarose and PGA scaffolds could be used to simulate endometrial structures. However, because of environmental and ethical concerns and the low cost of synthetic polymers, we recommend using PGA as a synthetic polymer for scaffolding in research instead of natural biomaterials.

• Membrane Journal
• /
• v.33 no.4
• /
• pp.201-210
• /
• 2023

Dust filter membranes play a crucial role in human life and various industries, as they contribute to several important aspects of human health, safety, and environmental protection. This study presents the development of a polysulfone@polyphenylene sulfide/polytetrafluoroethylene (PSf@PPS/ePTFE) composite dust filter membrane with excellent thermal stability and adhesion properties for high-temperature conditions. FT-IR analysis confirms successful impregnation of PSf adhesive onto PPS fabric and interaction with ePTFE support. FE-SEM images reveal improved fiber interconnection and adhesion with increased PSf concentration. PSf@PPS/ePTFE-5 exhibits the most suitable porous structure. The composite membrane demonstrates exceptional thermal stability up to 400℃. Peel resistance tests show sufficient adhesion for dust filtration, ensuring reliable performance under tough, high-temperature conditions without compromising air permeability. This membrane offers promising potential for industrial applications. Further optimizations and applications can be explored.

• Geomechanics and Engineering
• /
• v.32 no.1
• /
• pp.69-84
• /
• 2023

This paper proposes a novel frame element on Winkler-Pasternak foundation for analysis of a non-ductile reinforced concrete (RC) member resting on foundation. These structural members represent flexural-shear critical members, which are commonly found in existing buildings designed and constructed with the old seismic design standards (inadequately detailed transverse reinforcement). As a result, these structures always experience shear failure or flexure-shear failure under seismic loading. To predict the characteristics of these non-ductile structures, efficient numerical models are required. Therefore, the novel frame element on Winkler-Pasternak foundation with inclusion of the shear-flexure interaction effect is developed in this study. The proposed model is derived within the framework of a displacement-based formulation and fiber section model under Timoshenko beam theory. Uniaxial nonlinear material constitutive models are employed to represent the characteristics of non-ductile RC frame and the underlying foundation. The shear-flexure interaction effect is expressed within the shear constitutive model based on the UCSD shear-strength model as demonstrated in this paper. From several features of the presented model, the proposed model is simple but able to capture several salient characteristics of the non-ductile RC frame resting on foundation, such as failure behavior, soil-structure interaction, and shear-flexure interaction. This confirms through two numerical simulations.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.1
• /
• pp.57-65
• /
• 2023

A vibration response-based detection system was used to investigate the adhesive areas of single-lap joints using a nonlinear transformation approach for deep learning. In industry or engineering fields, it is difficult to know the condition of an invisible part within a structure that cannot easily be disassembled and the conditions of adhesive areas of adhesively bonded structures. To address these issues, a detection method was devised that uses nonlinear transformation to determine the adhesive areas of various single-lap-jointed specimens from the vibration response of the reference specimen. In this study, a frequency response function with nonlinear transformation was employed to identify the vibration characteristics, and a virtual spectrogram was used for classification in convolutional neural network based deep learning. Moreover, a vibration experiment, an analytical solution, and a finite-element analysis were performed to verify the developed method with aluminum, carbon fiber composite, and ultra-high-molecular-weight polyethylene specimens.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.471-478
• /
• 2021

Effective microorganisms (EM), which are sources of fermentation byproducts in herbal medicine, were compared with oyster mushrooms(OM) to identify alternative larval feeds for white-spotted flower chafer (Protaetia brevitarsis seulensis). The nutritional composition of each fermented feed was analyzed. The content of crude protein, crude fat, and fiber was higher in the OM fermented feed, except for crude ash. No difference in nutritional content of larvae based on fermented feed was observed. A comparative weekly analysis of the live weights of larvae was based on the fermented feed used. The average weight was significantly higher in the feeds using EM and OM from third week of observation. The larval survival rate in the presence of fermented feed was 96.7% compared with 9.8% with non-fermented feed. The results suggest that fermented food source is essential for the growth of white-spotted flower chafer, and OM was a stable alternative to EM as a fermentation source for the survival of white-spotted flower chafer.

• Composites Research
• /
• v.19 no.2
• /
• pp.13-19
• /
• 2006

In this paper, parametric study was carried out to design sandwich structures for EDM machines controlling stacking sequence, stacking thickness of composites and rib configuration. Sandwich structures which are dealt with in this paper are composed of fibre reinforced composite for skin material and foam or resin concrete for core materials. The sandwich column has cruciform rib to enhance bending stiffness of the structure and the bed has several vertical ribs to resist the normal forces and vibration. The design parameters such as rib thickness and stacking sequence were controlled to enhance the system robustness. Finite element analysis was also carried out to verify the variation of static and dynamic stiffness of the structures according to the variation of the parameters. Vibration tests were performed to verify the natural frequencies and damping ratios of the manufactured composite structures. The appropriate shape and configuration conditions for micro-EDM machine structures are proposed.