• Title/Summary/Keyword: fiber analysis

Search Result 3,987, Processing Time 0.032 seconds

Combined Effects of Sustained Load and Temperature on Pull-off Strength and Creep Response between CFRP Sheet and Concrete Using Digital Image Processing (디지털 이미지 분석을 통한 지속 하중과 온도의 복합 환경이 CFRP 쉬트와 콘크리트의 부착강도 및 크리프 거동에 미치는 영향 분석)

  • Jeong, Yo-Seok;Lee, Jae-Ha;Kim, Woo-Seok
    • Journal of the Korea Concrete Institute
    • /
    • v.28 no.5
    • /
    • pp.535-544
    • /
    • 2016
  • This paper aims at examining the effects of sustained load and elevated temperature on the time-dependent deformation of a carbon fiber reinforced polymer (CFRP) sheets bonded to concrete as well as the pull-off strength of single-lap shear specimens after the sustained loading period using digital images. Elevated temperature during the sustained loading period resulted in increased slip of the CFRP composites, whereas increased curing time of the polymer resin prior to the sustained loading period resulted in reduced slip. Pull-off tests conducted after sustained loading period showed that the presence of sustained load resulted in increased pull-off strength and interfacial fracture energy. This beneficial effect decreased with increased creep duration. Based on analysis of digital images, results on strain distributions and fracture surfaces indicated that stress relaxation of the epoxy occurred in the 30 mm closest to the loaded end of the CFRP composites during sustained loading, which increased the pull-off strength provided the failure locus remained mostly in the concrete. For longer sustained loading duration, the failure mode of concrete-CFRP bond region can change from a cohesive failure in the concrete to an interfacial failure along the concrete/epoxy interface, which diminished part of the strength increase due to the stress relaxation of the adhesive.

Associations between dietary patterns and hypertension among Korean adults: the Korean National Health and Nutrition Examination Survey (2008-2010)

  • Shin, Ji-Ye;Kim, Ji-Myung;Kim, Yuri
    • Nutrition Research and Practice
    • /
    • v.7 no.3
    • /
    • pp.224-232
    • /
    • 2013
  • The objective of this study is to identify the dietary patterns associated with the risk of hypertensions among Korean adults using data from the Korean National Health and Nutrition Examination Survey (KNHANES, 2008-2010). This study analyzes data from 11,883 subjects who participated in the health and nutrition survey, aging from 20 to 64 years. We performed factor analysis based on the weekly mean intake frequencies of 36 food groups to identify major dietary patterns. We identified three major dietary patterns in both sexes, namely "traditional", "western" and "dairy and carbohydrate" patterns. Participants in the highest quartile of western pattern scores had significantly higher blood pressure, serum total cholesterol, and triglyceride levels than those in the lowest quartile. Although not statistically significant, a trend (P for trend = 0.0732) toward a positive association between the western dietary pattern and hypertension risk was observed after adjustments for age, sex, education, income, body mass index (BMI), smoking, physical activity, and energy intake. The dairy and carbohydrate pattern was inversely related with BMI and blood pressures and positively associated with serum high-density lipoprotein (HDL)-cholesterol. After adjusting the age, sex, education, income, BMI, smoking, physical activity and energy intake, the dairy and carbohydrate pattern showed inverse associations with hypertension prevalence (OR = 0.64, 95% CI = 0.55-0.75; P for trend < 0.0001). Intakes of fiber, sodium, and antioxidant vitamins were significantly higher in the top quartile for the traditional pattern than in the lowest quartile for the traditional pattern (P for trend < 0.0001). Intakes of fiber (P for trend < 0.0001), calcium (P for trend < 0.0001), retinol (P for trend = 0.0164), vitamin $B_1$ (P for trend = 0.001), vitamin $B_2$ (P for trend < 0.0001), niacin (P for trend = 0.0025), and vitamin C (P for trend < 0.0001) were significantly increased across quartiles for the dairy and carbohydrate pattern whereas sodium (P for trend < 0.0001) intake was decreased for this pattern. In conclusion, the dairy and carbohydrate pattern may be associated with a reduced risk of hypertension whereas the western pattern may be associated with an increased risk of hypertension among Korean adults.

A Study on Fouling Characteristics and Applicability of Fouling Reducer in Submerged MBR Process (침지형 MBR공정에서 파울링 특성과 파울링 완화제의 적용성에 관한 연구)

  • Park, Jun Won;Park, Hong June;Kim, Min Ho;Oh, Yong Keol;Park, Chul Hwi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.35 no.5
    • /
    • pp.371-380
    • /
    • 2013
  • Though MBR process has many advantages, the greatest risk factors in operating MBR process are occurrence of membrane fouling and decrease of flux. It is very difficult to find exact mechanism due to complex influence by many effects, although there have been recently many studies of membrane fouling. The purposes of this study are firstly evaluating bioreactor of lab-scale and micro-filtration hollow fiber membrane, secondly investigating correlation between foulants affecting membrane performance and membrane fouling, and lastly evaluating various parameters affecting fouling and applicability of membrane fouling reducer. This study found that TMP was increasing rapidly and showed 0.32 bar and the average of flux was 88 LMH. EPS concentration tends not to change much above MLSS concentration (6,000 mg/L). However, EPS concentration variation is wide below MLSS concentration (6,000 mg/L). Also, from results of membrane surface condition and element analysis using SEM/EDX, carbon and fluorine were founded to be the highest percentage in membrane because of characteristics of membrane material. In operating continuously, inorganic fouling was generated by increase of these inorganic substances such as $Al^{3+}$ and $Mg^{2+}$. Lastly, the best filtration performance was obtained for 0.03 mg MFR/mg MLSS by results of particle size, zeta potential, $SCOD_{cr}$, EPS and MLSS concentration.

Different Sources and Levels of Copper Supplementation on Performance and Nutrient Utilization of Castrated Black Bengal (Capra hircus) Kids Diet

  • Mondal, M.K.;Biswas, P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.7
    • /
    • pp.1067-1075
    • /
    • 2007
  • Twenty eight 3-4 month old castrated Black Bengal kids (Capra hircus) were used to determine the effects of source and level of dietary copper (Cu) concentration on their performance and nutrient utilization. Cu was supplemented (0, 10, 20 and 30 mg/kg diet DM) as copper sulfate ($CuSO_4$, $5H_2O$) or copper proteinate (Cu-P). Kids were fed a basal diet containing maize (19.5%), soybean (17.0%), deoiled rice bran (56.5%), molasses (4.0%), di-calcium phosphate and salt (1.0% each) and mineral and vitamin mixture (0.5% each) supplements at 3.5% of body weight to meet NRC (1981) requirements for protein, energy, macro minerals and micro minerals, excluding Cu. The basal diet contained 5.7 mg Cu/kg, 122.5 mg Fe/kg, 110 mg Zn/kg, 0.26 mg Mo/kg and 0.32% S. $CuSO_4$ or Cu-P was added to the basal diet at the rate of 10, 20 and 30 mg/kg. Kids were housed in a well ventilated shed with facilities for individual feeding in aluminum plated metabolic cages. Blood samples were collected from the jugular vein on d 0, 30, 60 and 90 to determine hemoglobin (Hb), packed cell volume (PCV), total erythrocyte count (TEC), total leukocyte count (TLC) and serum enzymes (alkaline phosphatase, alanine transferase and aspertate transferase). A metabolism trial of 6 days duration was conducted after 90 days of experimental feeding. Statistical analysis revealed that source and level of Cu supplementation improved live weight gain (p<0.04) and average daily gain (p<0.01). No significant contribution of source and level of Cu to alter serum serum enzymes was evident. Goats fed Cu-P tended to have higher Hb, PCV and TEC than with $CuSO_4$ supplementation. Cu-P increased digestibility of ether extract (EE, p<0.02) and crude fiber (p<0.05) and showed an increasing trend (p<0.09) for digested crude protein (CP) and crude fiber (CF). Supplemental dose of Cu linearly improved (p<0.02) digestibilities of dry matter (DM), organic matter (OM), EE and nitrogen free extract (NFE). Though the absorption of nitrogen (N) was not affected (p>0.10) by both source and dose of Cu, N retention was affected (p<0.04) and there was a significant $Source{\times}Dose$ interaction (p<0.05). Final body weight (BW) was not influenced (p>0.10) by the source of Cu but increasing dose of Cu increased (p<0.04) the BW of kids. TDN intake (g/kg $W^{0.75}$) was higher (p<0.05) with the increased dose of Cu and there was a significant $Source{\times}Dose$ interaction. It was concluded that supplementation of Cu from different sources and varying dose level in a concentrate based diet may improve performance, nutrient utilization and plane of nutrition in castrated Black Bengal kids. The effects on performance and nutrient utilization are more pronounced with Cu-P than $CuSO_4$ supplementation. Higher dose of Cu showed better result than lower dose.

Component Analysis and Antioxidant Activity of Plantago asiatica L. (질경이의 영양성분 분석과 항산화 활성)

  • Park, Sung-Jin;Sihn, Eon-Hwan;Kim, Cheun-An
    • Food Science and Preservation
    • /
    • v.18 no.2
    • /
    • pp.212-218
    • /
    • 2011
  • The purpose of this study is to determine the possibility of using Plantago asiatica as natural health food source. To accomplish this purpose. the contents of proximate and anti oxidative nutrients of P. asiatica were measured. The contents of carbohydrate. crude protein. crude fat and crude ash are 63.71%, 18.75%, 1.67% and 6.48%, respectively And the calories and total dietary fiber of P. asiatica was 466.71 Kcal. Total dietary fiber was 22.68%, respectively. The contents of essential and non-essential amino acids were 4.815.22 mg and 6.591.04 mg, respectively. The K was the largest mineral followed by P, Ca, Mg, and Na, which means P. asiatica is alkali material. The EDA of P. asiatica was 59.32~70.30%, and the activity was dependent on the sample concentration. Total phenolic content of P. asiatica was $79.65{\mu}g/g$, and total flavonoids content was $4.43{\mu}g/g$. The P. asiatica extract showed the highest reducing power (3.5) at a concentration of 25 mg/mL. Based on the above results, we deemed that the P. asiatica might have potential antioxidant activities. The general nutrients and other antioxidant bioactive materials in P. asiatica were also potential materials for good health food.

Methods to improve infant clothing made with Hanji yarn - Investigating the image of Hanji and Hanji yarn infant clothing - (한지사 영·유아복 개선 방안 모색을 위한 연구 - 한지와 한지사 영·유아복 이미지 조사를 중심으로 -)

  • Ju, Jeong Ah;Shim, Joon Young;Kim, Hyun Chul
    • The Research Journal of the Costume Culture
    • /
    • v.21 no.1
    • /
    • pp.57-65
    • /
    • 2013
  • With environmental pollution becoming a serious problem, recently there has been increased interest in the environment and health. In addition, the development of materials for environmentally friendly and functional clothing has increased. Environmentally friendly products that use bark fibers of the mulberry(dak) tree are expressed in terms of dak fiber and Hanji yarn. This research analyzed consumer's perceived images of Hanji and Hanji yarn infant clothing. The research results are as follows. Based on analyzing images of Hanji and Hanji yarn, Hanji was categorized into four images that can be described as natural, pure, decorative, and functional, and Hanji yarn infant clothing was categorized into three images that can be described as natural, decorative, and functional. Based on the analysis of well-being elements in subjects' lifestyles, the following four inclinations were found: environmental friendliness, pursuit of novelty, life care, and environmental protection. On this basis, the subjects were categorized into three groups: the trend-pursuing group, the life-care group, and the social responsibility group. Subjects' perceived images of Hanji and Hanji yarn infant clothing were investigated, and these products were found to have a strong image of being Korean, traditional, and natural, while being weakly perceived as comfortable, functional, and practical. Analyzing the correlation between images of Hanji and Hanji yarn infant clothing and lifestyle groups revealed that these products were not perceived differently according to group. This study showed that Hanji and Hanji yarn are terms that are commonly associated with positive clothing material. However, both Hanji and Hanji yarn are perceived negatively in terms of functional image, which is an important factor in clothing material. In addition, even among consumers who pursue a lifestyle based on well-being, the functional image of Hanji yarn was not perceived highly. Hence, it is necessary to further examine the effect of terms such as Hanji and Hanji yarn on consumer choices. Therefore, caution is considered needed when using such terms in the marketing of related products.

Anti-thrombotic Effects of Modified Jeho-tang using a $FeCl_3$-induced Carotid Arterial Thrombosis Model

  • Bang, Jihye;Lee, Ki Mo;Kim, Bu-Yeo;Lee, Jeong-Hwa;Lee, In Sun;Jeon, Won Kyung
    • The Journal of Korean Medicine
    • /
    • v.34 no.2
    • /
    • pp.51-58
    • /
    • 2013
  • Objectives: The aim of this study was to examine the antithrombotic effects of the four herbal ingredients (Mume Fructus, MF; Santali Albi Lignum, SAL; Amomi Tsao-Ko Fructus, ATF; and Amomi Fructus, AF) of modified Jeho-tang (MJHT) in a ferric chloride ($FeCl_3$)-induced carotid arterial thrombosis model. Methods: Thirty minutes prior to a 35% $FeCl_3$ application, Sprague-Dawley (SD) rats were injected with saline, MF, SAL, ATF or AF (100 mg/kg, intraperitoneal injection), respectively. The effect of the MJHT ingredients was examined for time to occlusion (TTO) and thrombus weight (TW) in a $FeCl_3$-induced thrombosis model. Histological analysis was performed to examine the effect of the MJHT ingredients on collagen fiber damage using hematoxylin & eosin and Masson's trichrome staining. Results: Compared with vehicle treatment, MF, SAL and ATF treatment delayed TTO (vehicle, $8.11{\pm}0.60$ min; MF, $16.67{\pm}1.03$ min; SAL, $17.50{\pm}1.52$ min and ATF, $13.33{\pm}1.21$ min; P < 0.001) and inhibited thrombus formation (vehicle, $0.79{\pm}0.03$ mg/mm; MF, $0.61{\pm}0.07$ mg/mm; SAL, $0.57{\pm}0.03$ mg/mm and ATF, $0.72{\pm}0.02$ mg/mm; P < 0.001). In addition, each herbal ingredient of MJHT except for AF prevented the collagen fiber damage induced by a 35% $FeCl_3$ application. These results indicate that the MJHT ingredients MF ${\geq}$ SAL ${\geq}$ ATF ${\geq}$ AF possess antithrombotic activity in a $FeCl_3$-induced carotid arterial thrombosis. Conclusions: Altogether, these results are the first evidence that the MJHT ingredients MF, SAL and ATF have the ability to prevent vascular damage and thrombus formation in $FeCl_3$-induced carotid arterial thrombosis.

A Study on Manufacturing Method of Standard Void Specimens for Non-destructive Testing in RFI Process and Effect of Void on Mechanical Properties (RFI 공정 부품 비파괴검사용 표준 기공률 시편 제조 방법 및 기공률에 따른 기계적 물성 영향에 대한 연구)

  • Han, Seong-Hyeon;Lee, Jung-Wan;Kim, Jung-Soo;Kim, Young-Min;Kim, Wee-Dae;Um, Moon-Kwang
    • Composites Research
    • /
    • v.32 no.6
    • /
    • pp.395-402
    • /
    • 2019
  • The RFI process is an OoA process that fiber mats and resin films are laminated and cured in a vacuum bag. In case that resin film is insufficient to fill empty space in fibers, it makes void defect in composites and this void decrease mechanical properties of the composites. For this reason, non-destructive testing is usually used to evaluate void of manufactured composites. So, in this study, a manufacturing method of standard void specimens, which are able to be used as references in non-destructive testing, was proposed by controlling resin film thickness in the RFI process. Also, a fiber compaction test was proposed as a method to set the resin film thicknesses depending on target voids of manufacturing panels. The target void panels of 0%, 2%, and 4% were made by the proposed methods, and signal attenuation depending on void was measured by non-destructive testing and image analysis. In addition, voids of specimens for tensile, in-plane, short beam and compressive tests were estimated by signal attenuation, and mechanical properties were evaluated depending on the voids.

Analysis of feed value for setting an optimal harvest time of whole crop rice cultivars for silage use

  • Ahn, Eok Keun;Hong, Ha Cheol;Won, Yong Jae;Jung, Kuk Hyun;Lee, Jeong Heui;Hyun, Ung Jo
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.73-73
    • /
    • 2017
  • To set an optimal harvest time of main 7 whole crop silage rice cultivars, Nokyang(Ny), Mogwoo(Mw), Mogyang(My), Jungmo1029(Jm1029), Jungmo1038(Jm1038), Nokwoo(Nw) and Yeongwoo(Yw), based on feed value, we analyzed their feed values such as percent crude protein(CP), crude fat(CF), crude ash(CA), neutral detergent fiber(NDF), acid detergent fiber(ADF) and lignin. It was evaluated every 10 days from heading to 40 days after heading(DAH). Total digestible nutrient(TDN) and relative feed value(RFV) was also calculated from ADF and NDF. As results, CP was generally in decline as increasing DAH in Ny, My, Jm1029, Jm1038 and Yw and decreased to 20 DAH in Mw, decreased after increasing to 30 days in Nw. The CP content of Ny was relatively the highest ranged from 5.3% to 10.1% and Mw the lowest 4.5% to 5.2%, compared to others. CF content tend to decrease as DAH increase in Ny, My and Nw and decreased after increasing to 30 days Jm1029, increased after decreasing to 20 days Jm1038 but was not shown distinct trend of increase or decrease in Mw. Especially, that of Yw's CF gradually increased as harvest time late but relative content the lowest from 1.46% to 2.29% among 7 cultivars. The CA content of Ny, My, Jm1029 and Jm1038 approximately decreased as DAH increased and that of Mw was similar to others after heading, Nw decreased after 10 days and Yw increased after flowering. In all 7 cultivars, NDF and ADF had a tendency to decrease as days accumulated, in particular, Yw was the lowest on 30 DAH and so the content of Yw's TDN the highest(71.5%), while the lowest(67.2%) in Nw. For lignin, particularly, Mw tend to be in decline as DAH increase and was the lowest ranged from 1.34% to 1.87%. ADF analyses allows for the evaluation of in vivo digestible dry matter(DDM) and energy availability and NDF analyses provides the best indication of dry matter intake(DMI). Ultimately, the two factors can be combined to derive RFV for forage. RFV in general increased as DAH increased in all cultivars and was in order, Yw>My>Ny> Jm1038>Mw>Jm1029>Nw on 30 DAH. Taken together when these results, despite a slight increase of TDN after 30 DAH except Yw, considering forage yield potential, digestibility of grains and gradual decrease of CP and CF, the yellow ripe stage, about 30 DAH, was appropriate to harvest whole crop rice for silage use.

  • PDF

Physicochemical Properties of Wheat Bran in Different Areas Prepared by a High-pressure Homogenizer Process (고압균질처리에 따른 산지별 밀기울의 이화학적 특성)

  • An, Eun-Mi;Lee, Jae-Kang;Choi, Yong-Seok;Kim, Young-Hwa;Shin, Han-Seung
    • Korean Journal of Food Science and Technology
    • /
    • v.46 no.4
    • /
    • pp.404-409
    • /
    • 2014
  • In this study, the effects of high-pressure homogenizer treatment on the physicochemical properties of wheat bran from different areas were evaluated. The results showed that the high-pressure homogenizer process could effectively decrease particle size and loosen the microstructure of the wheat bran matrix. As the particle size decreased, the bulk density of wheat bran was significantly decreased (p<0.05) and the water-holding capacity, swelling capacity, oil-holding capacity, and cation-exchange capacity were substantially increased. In addition, microscopic analysis revealed the gradual disintegration of the original cell wall structure and the dissociation of bran tissues over the course of high-pressure homogenization treatment. Scanning electron micrographs showed that the process could also effectively separate out the structural components of wheat bran. These results suggest that the high-pressure homogenizer process is an effective method to modify the physicochemical properties of wheat bran and likely other cereal brans, which might provide potential fiber-rich ingredients for use in functional foods.