• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.44-44
• /
• 2011

본 연구에서는 직물조직의 분석과정을 자동화할 수 있는 전용 하드웨어 및 소프트웨어를 개발하였다. 직물조직의 분석은 직물 설계 및 품질관리 단계에서 매우 중요한 공정이나 현재까지도 확대경과 분해침에 의존하여 수작업으로 이루어지고 있는 것이 실정이라 자동화가 절실히 요구되는 분야라고 할 수 있다. 최근 컴퓨터 기술의 발달로 섬유산업 분야에서도 자동화 관련 연구가 많이 이루어지고 있으며 직물 분석 과정에 대한 연구도 여러 차례 시도된 바 있다. 여기에는 주로 디지털 영상으로부터 특징을 찾아내고 분석하는 이미지 프로세싱 기법이 쓰였는데 이는 재현성, 정확성, 속도 등에서 육안에 의한 방법과는 비교할 수 없는 장점을 가지고 있다. 그러나 기존의 연구들은 카메라의 한계로 인해 주로 저해상도의 이미지를 가지고 작업을 하거나, 이미지 프로세싱 또는 인공 신경망을 단독으로 적용하는 등의 한계를 가지고 있었다. 본 연구에서는 이러한 문제점을 극복하기 위해 초고해상도 직물 이미지를 획득한 뒤 이로부터 직물의 교차점을 인식하는데 필요한 파라미터를 추출하고 이를 인공 신경망에 학습시켜 직물 설계에 필요한 조직도를 생성하는 시스템을 개발하고자 하였다. 이를 위해 먼저 컴퓨터로 컨트롤이 가능한 직물 분석 전용 초정밀 XY 스테이지의 하드웨어를 설계 제작 하였으며 각종 이미지 분석 및 하드웨어 컨트롤에 필요한 전용 소프트웨어를 개발하였으며 그 결과 각종 직물의 조직을 매우 정확히 인식할 수 있게 되었다. 향후 이미지 획득 과정의 보완, 새로운 파라미터의 정의 및 신경망의 반복 학습을 통해 본 시스템이 보다 보완된다면 직물 분석 작업의 자동화를 통한 제품 개발과 생산에 소요되는 시간을 단축 및 품질 관리 공정의 자동화에 기여할 수 있을 것으로 기대된다.

• 보존과학연구
• /
• s.11
• /
• pp.87-105
• /
• 1990

Chemical and micro morphological changes of archaeological waterlogged woods from shipwrecked materials in marine situations were investigated which were submerged in seabed for over 900 years. Tested Wood species were Pinusdensiflora, Zelkova serrata, Quercus acutissima and Camellia japonica. The obtained results were summarized as follows; Chemical analysis showed that lignin content was increased, whereas the amout of holocellulose was heavily decreased in the degraded archaeological lwoods(DAW), when compared to the recent woods. The amount of alkalineextractives in the DAW was extremley high. IR spectra showed that disappearance of absortion band at $1,730㎝^-1$ intensity increase at 1,600, 1,500 and $1,270㎝^-1$ and the emergence of single band around $1,050㎝^-1$.Microscopic investigation showed that cell wall of latewood tracheids and fiber in the DAW were severely degraded while, early wood tracheids less degraded. Degradation in the cell wall was mainley occurred in $S_2$layer, while the middle lamella was the least degraded. The micro morphological characteristics of DAW were separation of secondary wall from middle lamella, cavities aligned with micro fibril angle in $S_2$layer and granular appearance of secondary wall by the bacterial attack.

• Journal of Welding and Joining
• /
• v.30 no.4
• /
• pp.38-43
• /
• 2012

Using a fiber laser heat source, an oil pressure sensor was fabricated to measure the pressure in commercial vehicles. A stepping motor was used for the rotational and translational motion in the diaphragms and hardware joining. Laser welding process algorism including shielding gas control and vision system was integrated by using LabVIEW software for the high quality welding and in-line monitoring purpose. For the maximum flexibility in pressure transmission to the pressure sensor, thin sheet metal diaphragm, $25{\sim}50{\mu}m$(SUS-316L), was used and the diaphragms were optimally designed with FEM analysis. The welded samples were cross-sectioned the observation showed that the maximum depth ratio was more than seven times of diaphragms. The maximum welding speed was measured to be as high as 50in/mm by the developed automation mechanism. The fabricated prototypes were tested for the proof pressure, spring constant and sealing. The FEM results of spring constant measurement was as accurate as up to 80% of the design value and the sensor was safely operated up to the nominal pressure of 10bars.

• Korean Journal of Materials Research
• /
• v.21 no.11
• /
• pp.623-627
• /
• 2011

This is a study on the distribution of acoustic emission parameters during a burst test for a type-II CNG vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached to the composite materials in the center of the fuel tank. The pressure was increased from 30 to 100% of the expected burst pressure and was maintained for 10 minutes at each level. Damage at 70% of expected burst pressure occurred by various damage mechanisms including fiber breakage and delamination, while that of below 60% only occurred by matrix crack initiation and growth. The count, duration and rise time of the AE signal at 60% of the expected burst pressure are distributed below 500, 5000 ${\mu}s$ and 300 ${\mu}s$, respectively. Then, at above 70% they increased with pressure by superimposing of individual AE signal generated at a nearby place. These results confirmed that the analysis of the distribution of AE parameters is an effective tool for estimating damage of a CNG fuel tank.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.127-138
• /
• 2009

Rock wool, a kind of asbestos substitutes, was analyzed for its physicochemical properties. After fivers of rock wool were instilled into rat lungs, These pathological changes were evaluated. In addition, the fibers in the lungs were counted and characterized after the lungs were treated for electron microscopical analysis. The lungs of rats showed pathological lesions such as granulomatous changes, but these lesions disappeared at 28 days groups after instilled rats. The rock wool fibers in the lungs decreased more 50 % after 28 days instilled into rat lungs. And rock wool showed early change in fiber compositions after 3 days compare with chrysotile showed after 7 days instilled into rat lungs. This study showed that the durability of rock wool in the lungs is more milder than chrysotile.

• Toxicological Research
• /
• v.30 no.4
• /
• pp.283-289
• /
• 2014

Tea flavonoids and polyphenols are well known for their extraordinary antioxidant activity which is considered important for anti-aging processes in animals. This study evaluated the anti-wrinkle effects of three different kinds of tea (Camellia sinensis) water extracts (CSWEs) including green, white, and black teas using a photoaged hairless mouse model. Data showed that the CSWE-treatment greatly improved skin conditions of mice suffering from UVB-induced photoaging, based on the parameters including the skin erythema index, moisture capacity, and transepidermal water loss. In addition, the wrinkle measurement and image analysis of skin replicas indicated that CSWEs remarkably inhibited wrinkle formation. In histological examination, the CSWE-treated mice exhibited diminished epidermal thickness and increased collagen and elastic fiber content, key signatures for skin restoration. Furthermore, the reduced expression of MMP-3, a collagen-degradative enzyme, was observed in the skin of CSWE-treated animals. Interestingly, comparative data between green, white, and black tea indicated that the anti-wrinkle activity of white tea and black tea is equally greater than that of green tea. Taken together, these data clearly demonstrated that CSWEs could be used as an effective anti-wrinkle agent in photoaged animal skin, implying their extended uses in therapeutics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.248-251
• /
• 2005

To investigate the degeneration process in the intervertebral disc, a three dimensional (3D) poroelastic finite-element (FE) model was developed. Disc was modeled as two different regions, such as annulus modeled with fiber reinforced 20 node poroelastic ground matrix and nucleus having large porosity. Excess Von Mises stress in the disc element assumed to be a possible source of degeneration under compressive loading condition. Recursive calculation was continued until the desired convergence was attained by changing the permeability and porosity of those elements, which could be predicted from the previous iteration. The degenerated disc model showed that relatively small compressive stresses were generated in the nucleus elements compared to normal disc. Its distribution along the sagittal plane was matched well with a previously reported experimental result. Contrasts to this result, pore pressures in the nucleus were higher than those in the normal disc. Total stress indicated similar values for two different models. This new approach using poroelastic modeling could provide the explanation of the interaction between fluid and solid matrix in the disc during the degeneration process.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.807-819
• /
• 1989

Buckling and vibration of laminated non-circular cylindrical shells with constant thickness and simply supported boundary condition is considered. Governing equations are derived based on the Donnell and Flugge shell theory and Galerkin method is applied for the numerical analysis. Comparisons are made between present results and others. Variations of frequency parameter and buckling load parameter on the change of stacking angle, eccentricity parameter and shell theories are investigated. Conclusion of this study is as follows: (1) General solutions of buckling and vibration of laminated non-circular cylindrical shell are obtained. (2) Frequency parameter is decreased as the initial axial load is increased. (3) In general, frequency and buckling load parameter of laminated non-circular cylindrical shells are decreased as increasing of eccentricity parameter and stacking angle.

• Korean Journal of Food Science and Technology
• /
• v.18 no.3
• /
• pp.173-180
• /
• 1986

To investigate on the biochemical characteristics of muscle fiber, myofibrils and actomyosins were prepared front red muscle and white muscle, and their ATPase activities and SDS-polyacrylamide gel electrophoretic patterns were compared. Also biochemical characteristics of bovine muscle were compared with those of chicken muscle for the detection of species characteristics. SDS-polyacrylamide gel electrophoretic analysis indicated that red muscle contained nlore 30K component of myofibril than white muscle. Differences in KCI concen-tration dependency of actomyosin ATPase activities and ATPase activity-pH cone were observed, when bovine muscle were compared with chicken muscle.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.17-31
• /
• 2003

$Premi\grave{e}re$ Vision is a leading textile collection held since 1973. In this study, textiles for 2004/05 F/W season in $Premi\grave{e}re$ Vision were analyzed at the various point of view, such as general trend, sub-theme, fiber content, color trend, structure, yarn trend, pattern, texture, decoration, finishing and other technical treatment, and functionality. There were three general trends; natural/ecology, geometry, and combination. Natural color and texture were widely used over the fabric exhibited, and irregularities expressed the natural trend of textiles. Geometric patterns were used for knit as well as for woven. Geometry expressed by various methods such as weaving, knitting, printing, shearing, embossing, and etc. However, geometry shown in this season was not a clear form expressed by weaving, but a blurry, irregular form expressed by various other methods such as knitting. The combination among heterogeneous fibers, yarns, colors, images, and textures was usual, however, the harmony among them was accomplished.