• Journal of Internet Computing and Services
• /
• v.13 no.3
• /
• pp.17-22
• /
• 2012

In this paper, a photoelectric image detection system is proposed using an APD(Avalanche Photodiode) sensor, a LED illuminator, and fiberoptic waveguides. This proposed pinhole detection system can detect the pinholes of 100 micron with the speed rate of 1,000mpm(meter per minute). And detecting performance of image system is improved by the SQL based DB analysis of classifying pinhole's detected location and size using image detection algorithms.

• Structural Engineering and Mechanics
• /
• v.44 no.2
• /
• pp.127-138
• /
• 2012

The composite materials may be exposed to environmental (thermal or hygral or both) condition during their service life. The effect of environmental condition is usually adverse from the point of view of design of composite structures. In the present research study the effect of hygrothermal condition on the design of laminated composite structures is investigated. The active fiber composite (AFC) which may be utilized as actuator or sensor is considered in the present analysis. The sensor layer is used to sense the level of response of the composite structures. The sensed voltage is fed back to the actuator through the controller. In this study both displacement and velocity feedback controllers are employed to reduce the response of the composite laminate within acceptable limit. The Newmark direct time integration scheme is employed along with modal superposition method to improve the computational efficiency. It is observed from the numerical study that the laminated composite structures become weak in the presence of hygrothermal load. The response of the structure can be brought to the acceptable level once the AFC layer is activated through the feedback loop.

• Steel and Composite Structures
• /
• v.9 no.5
• /
• pp.473-497
• /
• 2009

For the spatially coupled free vibration analysis of composite box beams resting on elastic foundation under the axial force, the exact solutions are presented by using the power series method based on the homogeneous form of simultaneous ordinary differential equations. The general vibrational theory for the composite box beam with arbitrary lamination is developed by introducing Vlasov°Øs assumption. Next, the equations of motion and force-displacement relationships are derived from the energy principle and explicit expressions for displacement parameters are presented based on power series expansions of displacement components. Finally, the dynamic stiffness matrix is calculated using force-displacement relationships. In addition, the finite element model based on the classical Hermitian interpolation polynomial is presented. To show the performances of the proposed dynamic stiffness matrix of composite box beam, the numerical solutions are presented and compared with the finite element solutions using the Hermitian beam elements and the results from other researchers. Particularly, the effects of the fiber orientation, the axial force, the elastic foundation, and the boundary condition on the vibrational behavior of composite box beam are investigated parametrically. Also the emphasis is given in showing the phenomenon of vibration mode change.

• Computers and Concrete
• /
• v.7 no.4
• /
• pp.303-315
• /
• 2010

In this paper, we present a new finite Timoshenko beam element with a model for ultimate load computation of reinforced concrete frames. The proposed model combines the descriptions of the diffuse plastic failure in the beam-column followed by the creation of plastic hinges due to the failure or collapse of the concrete and or the re-bars. A modified multi-scale analysis is performed in order to identify the parameters for stress-resultant-based macro model, which is used to described the behavior of the Timoshenko beam element. The micro-scale is described by using the multi-fiber elements with embedded strain discontinuities in mode 1, which would typically be triggered by bending failure mode. A special attention is paid to the influence of the axial force on the bending moment - rotation response, especially for the columns behavior computation.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.3
• /
• pp.43-51
• /
• 2011

Fiber Reinforced Polymer (FRP)s have various advantages for construction material in that they are noncorrosive and very strong. FRPs are economical and effective for management and maintenance when applied to footbridge, beam or deck of the bridge, girder, and marine structure. For safety, optimal design for standard modulation of the cross section is necessary. Conditions of optimum are possibilities of domestic production, modular assembly, and structure materials cast in compressed area.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.761-767
• /
• 1993

A precision planting system using computer controlled technology for mulching cultivation was developed and tested . The system consisting of a micro-computer, several optical fiber sensors and control actuators realized the mechanization of the precision planting operation. The film hole positions, existences of a seed on shutter were detected and the planting speed was measured. The shutter opening mechanism and a seed metering device driven by a stepping motor were controlled, automatically . The planting timing of the shutter opening mechanism were analyzed from a video camera motion analysis, theoretically. The results showed a sufficient accuracy of a seed planted into the center a film hole with a variety of planting speeded. The gravity point positions in film hole of seeds planted by the system just were within the area of +-5mm of the hole center when the hole diameter was 40mm.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.765-777
• /
• 2020

In the context of classic conical shell formulation, nonlinear forced vibration analysis of truncated conical shells and annular plates made of multi-scale epoxy/CNT/fiberglass composites has been presented. The composite material is reinforced by carbon nanotube (CNT) and also fiberglass for which the material properties are defined according to a 3D Mori-Tanaka micromechanical scheme. By utilizing the Jacobi elliptic functions, the frequency-deflection curves of truncated conical shells and annular plates related to their forced vibrations have been derived. The main focus is to study the influences of CNT amount, fiberglass volume, open angle, fiber angle, truncated distance and force magnitude on forced vibrational behaviors of multi-scale truncated conical shells and annular plates.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.933-935
• /
• 1987

We have developed 140Mb/s and 565Mb/s muldexes as parts of a 565Mb/s Optical Fiber Transmission System. Bunched frame structures are used for these muldexes. In this paper we describe their frame synchronization performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.365-368
• /
• 1995

Charge decay, thermally stimulated current (TSC), charging and discharging currents(I) are measured for corona-charged composite insulating materials. In this study, We will make an experiment in charge decay on composite material surface, TSC, polarity effect and the others in order to analysis its mechanism. Especially, Fiber glass Reinforced Plastics(FRP) is the best composite material which has been so far. Therefore, Its worthy of notice to investigate its characteristic. And then some other materials will be focused on. This experiment measured characteristic of charge decay, dependence of discharging-time and other electrostatic characteristics on FRP.

• Korean Journal of Human Ecology
• /
• v.4 no.2
• /
• pp.110-122
• /
• 2001

The purposes of this study was to examine the present situation of merchandise assortment and informations in internet fashion shopping mall. Merchandise assortment dimensions were width and depth. Merchandise assortment factors for apparel were style, size, and color. Merchandise informations were investigated using price and fabric contents. The data were collected from 11 internet fashion site to investigate styles. colors, sizes. price and fabric contents. The data analysed with frequency. crosstab analysis, $\chi$$^{2}$-test. The results were as follow : 1. Upper items(37.5%) as T, knits, shirts, and blouses were offered more style than bottom items(13.5%) as skirts, pants. 2. The 36.4% of styles offered one color. Basic color as black, white, grey, beige, ivory was 38.1%. 3. The 54.4% of merchandises carried same size. 4. Fiber contents was made up of cotton(44.2%). hemp & rayon(22.5%), and synthetic (33.3%). 5. The 75.1% of merchandise was relatively low price of below 50,000 won, the 24.9% of merchandise was rather high price of more than 50.000 won.