• 대한화학회지
• /
• 제19권2호
• /
• pp.142-146
• /
• 1975

황산제일철을 원료로 해서 함수산화철 안료를 제조하기 위한 실험이다. 황산제일철을 암모니아로 중화해서 Mohr's salt(ferrous ammonium sulfate)을 만들고 Mohr's salt의 농도를 Fe(II) 이온농도, 14${\sim}$72g/l, 수소이온농도를 pH3 또는 6으로 조절한뒤, 반응온도는 $90{\sim}100^{\circ}C$로 일정하게 유지하고 반응시간 2시간, 3기압으로 공기 가압한 결과는 다음과 같다. Mohr's salt의 농도가 진하고, 중성으로 갈수록 함수산화철의 수득율이 증가되며, Mohr's salt 농도가 Fe(II) 이온농도, 42.81g/l 일때, 91.5% 이상의 수득율을 얻었다. 이렇게하여 생성된 함수산화철의 결정형은 $\alpha$-goethite형이며, 색상도 천연 ${\alpha}$-goethite와 유사하였다. 이것을 $500^{\circ}C$로 하소(calcination)하니 미려한 적갈색을 띤 ${\alpha}-Fe_2O_3$가 생성되었다.

• 한국약용작물학회지
• /
• 제22권1호
• /
• pp.32-37
• /
• 2014

To study the cause of physiological disorder in leaf of ginseng cultivated at paddy soil, the degree of brown-colored symptom (BCS) and the contents of inorganic matter in leaf were investigated by irrigating the solution of ferric and ferrous iron of 0.1 ~ 2.0%, and citric acid of 1.0 ~ 4.0% on bed soil, respectively. Ratio of BCS by variety was as high as 85.0% in Yoenpoong, while it was as low as 5.4%, 7.5% in Chunpoong and Hwangsook, respectively. The contents of inorganic matter of leaf in Yoenpoong were lower in $P_2O_5$, Ca, and Mg, while it were higher in K, Fe, and Mn than other variety. Iron solution caused BCS more distinctly when each ferric and ferrous iron were dissolved with 1.0% citric acid than when each iron was dissolved without citric acid. Ferric iron caused BCS more effectively than ferrous iron. BCS occurred in 4.0% citric acid was as same as 2.0% ferric iron mixed with 1.0% citric acid. Low $P_2O_5$ and high Fe content in leaf appeared in both of artificial and natural symptoms. We concluded that excessive Fe uptake caused BCS to leaf because the solubility of iron was increased in condition of low soil pH.

• 한국재료학회지
• /
• 제18권4호
• /
• pp.218-221
• /
• 2008

A $Fe(OH)_2$ suspension was prepared by mixing iron sulfate and a weak alkali ammonia solution. Following this, iron oxides were synthesized by passing pure oxygen through the suspension (oxidation). The effects of different reaction temperatures ($30^{\circ}C$, $50^{\circ}C$, $70^{\circ}C$) and equivalent ratios ($0.1{\sim}10.0$) on the formation of iron oxides were investigated. An equilibrium phase diagram was established by quantitative phase analysis of the iron oxides using the Rietveld method. The equilibrium phase diagram showed a large difference from the equilibrium phase diagram of Kiyama when the equivalent ratio was above 1, and single $Fe_3O_4$ phase only formed above an equivalent ratio 2 at all reaction temperatures. Kiyama synthesized iron oxide using iron sulfate and a strong alkali NaOH solution.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.826-827
• /
• 2006

Copper infiltration is demonstrated as a viable solution to achieve higher mechanical properties by filling the interconnected porosities of a ferrous structure with copper infiltrant. This paper will present the results of a design of experiments study based on the selected processing variables in the copper infiltration process. The variables are the following: Infiltrating temperatures, infiltrating time at pre-heat zone and hot zone, the green density of iron part, the migration of copper into the iron part at different processing conditions. The results show the flexibility of the infiltration process to attain certain mechanical properties by changing the processing conditions.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.353-357
• /
• 2004

The influences of the ozone oxidation, reaction temperature and NaOH equivalent ratio on the iron oxide formation were studied with fixed ferrous sulfate concentration(0.5M $FeSO_4$ㆍ$7H_2$O). Geothite($\alpha$-FeOOH) and/or Magnetite ($Fe_3$$O_4$) were synthesized depending on the reaction conditions. The characteristics of the synthesized powders were evaluated by XRD, SEM and quantitative phase analysis. The synthetic conditions to get Goethite were quite different from the results of Kiyama's and the Goethite was conveniently synthesized at low temperature and at low NaOH equivalent ratio.

• Preventive Nutrition and Food Science
• /
• 제8권4호
• /
• pp.406-411
• /
• 2003

The objective of this study was to investigate the effects of iron supplementation and nutrition education on the iron status and anemia of middle school girls in Ulsan city in Korea. The subjects were already diagnosed as having anemia (hemoglobin < 12 g/dL) or iron deficiency (ferritin < 12 ng/mL and/or transferrin sataturation < 14 %). Over a period of three months, one iron tablet (80 mg Fe as ferrous sulfate/day) was administered to the iron deficient subjects and two tablets (160 mg Fe as ferrous sulfate/day) were administered to the anemia subjects. Total calorie intake of subjects was 82.1 % of RDA. The iron intake of subjects was 91.3 % of RDA and the Ca intake was 78.8 % of RDA. The basal hemoglobin concentration of subjects averaged 12.8 1.2 g/dL, and this increased significantly (p < 0.001) to 13.2 0.9 g/dL after iron supplementation. The basal ferritin concentrations were 14.9 14.2 ng/mL and these significantly increased to 26.6 19.8 ng/mL (p < 0.001). The level of total iron binding protein (TIBC) significantly decreased from the initial 523.1 108.7 $\mu\textrm{g}$/dL to 462.2 90.2 $\mu\textrm{g}$/dL (p < 0.001) after iron supplementation. Anemia symptoms such as‘Being bruised easily’, ‘Inflamed inner mouth’, and ‘Pale face’ improved significantly after iron supplementation in the subjects. There was a negative correlation between their class & year ranking and serum iron level, transferrin saturation after nutritional education and iron supplementation. It was shown, therefore, that the higher the improvement of their anemia level after iron supplementation, the higher their academic performance. It was shown that there was some improvement of their dietary attitudes after nutritional education, and that their serum level related to anemia symptoms and iron nutrition was improved after iron supplementation.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.82-87
• /
• 2002

Not only ferrous but also non-ferrous materials such as aluminum, brass, plastic and woods need cutting operation in recent manufacturing industry. Over the past few years a considerable number of studies have been made on non-ferrous metal cutting. But more study is required to meet various engineering needs. The purpose of this paper is to preform an experiment on the influence of feed-rate adjustment and side rake angle in turning operations from non-ferrous metals. As a result, the surface roughness was reduced when a side-rake angle increases and feed-rate decreases in the case of the plastic, brass, aluminum, and paulownia. Therefore, this papers develop a new type bite that be used to adjust side-rake angle.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.275.1-275.1
• /
• 2008

• 한국식품저장유통학회지
• /
• 제6권1호
• /
• pp.115-120
• /
• 1999

This study was carried out to investigate the effect of Pine needle extract on lipid oxidation and free radical reaction in iron sources reacted with active oxygen species. The results were summarized as follow; The pine needle extracts didn`t show a distinct effect on reduction of lipid oxidation if the iron ion didn`t exist in oil emulsion. The pine needle extracts played role as a strong chelating agents to bind iron ion if Ferrous iron(Fe\ulcorner) exist in oil emulsion. Ferric iron(Fe) was lower effect than Ferrous iron(Fe) on free radical reaction in oil emulsion. And also, the Fe\ulcorner reacted with pine needle extract did not show distinct effect on free radical reaction, compared to Fe\ulcorner reacted with pine needle extract. And also, Pine needle extracts reacted with H\ulcornerO\ulcorner were tended to show a low oxygen scavenging ability in case of H\ulcornerO\ulcorner only was existed, compared to those of H\ulcornerO\ulcorner + Fe\ulcorner complex. Pine needle extracts were the most powerful Fe\ulcorner binding agents, compared to other strong synthetic antioxidants such as EDTA and DTPA.

• Environmental Engineering Research
• /
• 제20권3호
• /
• pp.205-211
• /
• 2015

Reduced forms of iron, such as zero-valent ion (ZVI) and ferrous ion (Fe[II]), can activate dissolved oxygen in water into reactive oxidants capable of oxidative water treatment. The corrosion of ZVI (or the oxidation of (Fe[II]) forms a hydrogen peroxide ($H_2O_2$) intermediate and the subsequent Fenton reaction generates reactive oxidants such as hydroxyl radical ($^{\bullet}OH$) and ferryl ion (Fe[IV]). However, the production of reactive oxidants is limited by multiple factors that restrict the electron transfer from iron to oxygen or that lead the reaction of $H_2O_2$ to undesired pathways. Several efforts have been made to enhance the production of reactive oxidants by iron-induced oxygen activation, such as the use of iron-chelating agents, electron-shuttles, and surface modification on ZVI. This article reviews the chemistry of oxygen activation by ZVI and Fe(II) and its application in oxidative degradation of organic contaminants. Also discussed are the issues which require further investigation to better understand the chemistry and develop practical environmental technologies.