• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.544-548
• /
• 2003

The objective of this investigation is to develop an efficient method to generate and measure torsional waves in non-ferromagnetic waveguides by using magnetostrictive transducers. In existing methods using a nickel strip that is attached circumferentially to the test specimen such as aluminum pipes, large current input to the magnetostrictive transducer often generates undesired wave modes in addition to desired torsional wave. However, we propose an improved method to generate the torsional waves without being accompanied by other undesirable wave modes regardless of the input current magnitude. The specific transducer configuration and its performance will be presented in the present investigation.

• Journal of Magnetics
• /
• 제10권2호
• /
• pp.58-62
• /
• 2005

Periodic magnetic nanodot arrays were successfully produced on glass substrates by interference laser lithography and electron beam lithography methods. Magnetic force microscopy (MFM) observation was carried out on fabricated nanodot arrays. MFM tip induced magnetization effects were clearly observed in ferromagnetic elliptical nanodots varying in material and aspect ratio. Fe-Cr dots with a high aspect ratio show reversible switching of the single domain magnetization state. At the same time, Co nanomagnets with a low aspect ratio exhibit tip induced transitions between the single domain and the vortex state of magnetization. The simple nanolithography is potentially an efficient method for fabrication of patterned magnetic arrays.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.408-411
• /
• 2000

Although the rotation angle and its spectrum of the magneto-optical Kerr effect are physical quantities determined inherently by the material itself, we found that they can widely be designed by utilizing a one-dimensional photonic crystal with a ferromagnetic defect layer. By suitable choice of the film structure, the rotation angle at a designated narrow wavelength is resonantly enhanced up to as several hundred times larger as ordinary rotation angle of the magnetic. This is originated by the localization of light at the magnetic layer inside the film.

• 한국자기학회지
• /
• 제20권3호
• /
• pp.100-105
• /
• 2010

본 논문에서는 강자성 선체에 존재하는 영구자화 분포에 기인한 자기장 신호를 예측하고자 연속체역학에 기반을 둔 매질민감도법과 등가 자기 모델을 결합한 역문제 해석 기법을 제시한다. 이를 위하여 3차원 자기전하 모델과 2차원의 등가 자기쌍극자 모델을 구축하였고 각각의 등가모델에 맞는 매질민감도 공식을 유도하였다. 매질민감도법은 자기전하나 자기쌍극자 변화에 대한 목적함수의 1차 미분정보를 제공하고 설계변수의 개수에 영향을 받지 않기 때문에 최적해를 빠른 시간에 도출할 수 있다. 제안된 해석 기법의 타당성을 검증하기 위해서 실험을 통해 측정된 자기장 신호와 각각 등가모델에 의한 역문제 해석을 통해 얻어진 예측치를 비교하였다.

• 한국자기학회지
• /
• 제23권6호
• /
• pp.200-204
• /
• 2013

마그네트론 스퍼터를 이용하여 반강자성/비자성/강자성의 삼층박막 $50{\mu}m{\times}50{\mu}m$ 크기의 십자 형태의 PHR 자기센서를 제작하고, 도메인스코프를 이용하여 외부자기장에 의한 PHR 센서의 자화거동을 관찰하였다. 또 자기저항 신호로부터 센서 특성 및 자기 민감도를 측정하였다. 삼층 구조의 PHR 센서에서 자기이력곡선 이동으로부터 측정한 교환결합력은 20 Oe였으며, $20^{\circ}$에서 자기 민감도는 $20{\mu}V/Oe$이였다. 이를 이용하여 자기 모멘트가 $10^{-13}emu$인 자기 박테리아를 $1{\times}10^3$개 정도의 분해능까지 측정하였으며, 또한 자기 민감도와 박테리아에 의한 출력 전압을 이용해 계산한 결과 박테리아 한 마리가 가지는 자기장의 크기는 $5{\times}10^{-5}Oe$이였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.766-777
• /
• 2008

Currently in increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method (NATM). Successful design, construction and maintenance of NATM tunnel demands prediction, control and monitoring of ground displacement and support stress high accuracy. A magnetic anisotropy sensor is used for nondestructive measurement of stress on surfaces of a ferromagnetic material, such as steel. The sensor is built on the principle of the magneto-strictive effect in which changes in magnetic permeability due to deformation of a ferromagnetic material is measured in a nondestructive manner, which then can be translated into the absolute values of stresses existing on the surface of the material. This technique was applied to measure stresses of H-beams, used as tunnel support structures, to confirm expected measurement accuracy with reading error of about 10 to 20 MPa, which was confirmed by monitoring strains released during cutting tests The results show that this method could be one of the promising technologies for non-destructive stress measurement for safe construction and maintenance of underground rock structures encountered in civil and mining engineering.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1392-1397
• /
• 2010

Currently in increasing number of urban tunnels with small overburden are excavated according to the principle of the New Austrian Tunneling Method(NATM). Successful design, construction and maintenance of NATM tunnel demands prediction, control and monitoring of ground displacement and support stress high accuracy. A magnetic anisotropy sensor is used for non-destructive measurement of stress on surfaces of a ferromagnetic material, such as steel. The sensor is built on the principle of the magneto-strictive effect in which changes in magnetic permeability due to deformation of a ferromagnetic material is measured in a non-destructive manner, which then can be translated into the absolute values of stresses existing on the surface of the material. This technique was applied to measure stresses of H-beams, used as tunnel support structures, to confirm expected measurement accuracy with reading error of about 10 to 20MPa, which was confirmed by monitoring strains released during cutting tests The results show that this method could be one of the promising technologies for non-destructive stress measurement for safe construction and maintenance of underground rock structures encountered in civil and mining engineering.

• 한국자기학회지
• /
• 제16권5호
• /
• pp.234-239
• /
• 2006

교환 결합력을 갖는 CoFe/MnIr 박막 시료에서 100 MHz$\sim$9 GHz의 주파수 범위에서 마이크로파 투자율을 측정하였으며, 이들 결과는 Landau-Lifshitz-Gilbert 이론을 사용하여 분석 하였다. 초기투자율 및 강자성 공명주파수는 CoFe의 두께 및 일방이방성에너지(unidirectional anisotropy)에 따라서 조절이 가능하며, 특히 공명주파수는 최대 20 GHz까지 조율이 가능하다. 따라서 마이크로파 대역에서 고투자율 및 저손실 특성을 갖는 CoFe/MnIr 재료는 수 GHz 대역에서 작동하는 마이크로파 부품에 적용 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1864-1866
• /
• 1999

The magnetic nondestructive test can be applied to evaluate the magnetic material characteristics and the fracture properties through the internal defects of SA-508 used in the pressure vessels of the nuclear power plants as the direct and accurate in-situ testing methods. The fracture toughness, yield strength and the stress distribution around the defects in the surface and sub-surface of magnetic materials can be directly estimated by Bark-hausen noise(BN) methods as NDT. The testing process of SA-508 by Barkhausen noise method was advanced by controlling the austenizing peak temperature and the time of maintenance at a constant austenizing peak temperature, therefore causing the variation of fracture toughness. Through above process. we can evaluate the variations of effective grain size and the correlation of effective grain size and FATT at each situation. And the stress distribution around the defects can be quantified nondestructively through Barkhausen method.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.151.1-151.1
• /
• 2016

Complex oxide heterointerfaces have been extensively explored in the past due to the novel phenomenon emerging at such interfaces that differ from their individual bulk counterparts. The integration of a ferromagnetic (FM) material with the superconducting (SC) material leading to proximity effect is one of the commonly studied phenomenon in these heterostructures. In continuation, we have stabilized the FM layer La0.7Ca0.3MnO3 (LCMO) on SC material YBa2Cu3O7-${\delta}$ (YBCO) using pulsed laser deposition technique and explored the structural, magnetic, electrical and magneto-transport properties of this heterostructure. ${\Phi}$-scan measurements confirm the epitaxial nature of LCMO/YBCO heterostructure grown on single crystalline SrTiO3 substrate. The FM transition of LCMO and SC transition of YBCO are observed in the magnetization measurements of the bilayer structure. Through electrical measurements, we understood that the proximity effect leads to lowering of the SC transition of YBCO. The role of interface in the bilayer structure is also realized through electrical transport measurements.