• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.50-52
• /
• 2001

The BLDC(Brushless DC) motor with the permanent magnet has many merits such as high efficiency and efficiency. These characteristics of the BLDC motor makes them one of the most popular motors in the world today. The C type ferrite magnet is many used in BLDC motor for high performance, especilly low price. Many papers have been written on the analysis of the BLDC motor with C type ferrite magnet. But, most of these target models are contained symmetric distribution of permanent magnet. In this paper, investigations are made on different distribution of permanent magnets for a understanding of the effects of unequal permanent magnet location on the unbalanced cogging torque. Motor torque and cogging torque are obtained by using the 2 dimensional finite element method.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2173-2178
• /
• 2010

The magnetization directions of a polar magnetized ferrite bonded magnet are analyzed by finite element method (FEM). The influence of the width of SmCo magnets for magnetic field generation is investigated. The surface flux densities of the polar anisotropic magnets are analyzed and compared according to the pole number and thickness of the magnets. And the electromotive force (EMF) values of brushless DC motors with the magnets are investigated. The validity of the analysis method is verified by comparing the analyzed results with measured ones.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.372-376
• /
• 1999

The deposited Cu film on the ferrite magnet was more deposited comparing with that on the plastic magnet. The Cu film became thicker on the S pole comparing with that on the N pole in the both of magnets. The thickness and texture coefficient of deposited copper film affected with direction of line of magnetic force. The difference of pole had little or no effect to the texture coefficient of deposited nickel film. The reaction rate on ferrite magnet and S pole was faster comparing with that on plastic magnet and N pole.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.125-127
• /
• 1996

This paper deals with the fabrication of 4 poles anisotropic Sr·ferrite plastic magnets. After Polyamide6 and polyamlde12 are kneaded respectively with Sr·ferrite powder, silane coupling and calcium stearate of lwt% are added for coating and pelleting. The pelleted specimen are injection-moulded under the magnetic field using 4 poles mould. For 4 poles anisotropic Sr·ferrite plastic magnets with polyamide6 as a binder, the surface magnetic flux density distribution is +943.8∼-943.87kG and the deviation is 5.2%, where as with polyamide12, the distribution is +1040.9∼-1040.9kG and the deviation is 5.4%. It shows that both of the magnet distributions are stable. As the results of the experiments, we find 4 poles anisotropic Sr·ferrite magnets have good properties as the materials appropriate for manufacturing magnet type synchronous motors.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1806-1812
• /
• 2016

We propose an interior permanent magnet syhchronous motor (IPMSM) with arc-shape ferrite permanent magnets (PMs) as a substitute for the rare-earth permanent magnet, and determine its optimal design through parametric study. First, we use 2D finite element analysis to analyze 4-poles and 6-slots initial model according to performance requirements and design parameters. The current angle of the maximum average torque considered in the analysis is different compared with the current angle of the minimum torque ripple. Thus, the parametric study for optimal rotor design is performed by varying the thickness and the offset radius of the PMs according to current angle. In particular, a narrow bridge is required in conventional IPMSM for reducing flux leakage; however, the increase in cogging torque in the analysis model saturates the narrow bridge (large offset radius). Therefore, we suggest an appropriate shape considering limiting conditions such as DC link voltage, average torque, torque ripple, and cogging torque taking into account performance requirements.

• 전기의세계
• /
• 제19권4호
• /
• pp.12-17
• /
• 1970

BaO.nFe$_{2}$O$_{3}$ Powder ferrite magnet was made by sintering process. The purity of the powder were 99.6% far BaO. 99.5% for Fe$_{2}$O$_{3}$, and the grain size 1-3 micron. The Optimum mixing ratio n=4.4 the optimum density 4.8gr/cm$^{3}$ and the optimum second sintering temperature 1260.deg. C was found. The theoretical bloch wall, dimension of domain and energy per unit volume of BaFe$_{12}$O$_{19}$ were compared with pure Fe. Also, the saturation magnetization and maximum energy product were computed.d.d.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.78-81
• /
• 2002

This paper describes on the design structure and development temperature stable strip-line junction isolator operating in above resonance mode. Temperature characteristics of isolator depend on magnet, YIG(Yttium Iron Garnet) ferrite, and conductor etc. These require temperature stability and possible methods of compensation for the temperature dependent effects. In this paper, the analysis and measurement of the temperature characteristics were carried out for the material isolator prototype. The bandwidth of isolator was expended and the center frequency shift was reduced in temperature range of -20∼8O$^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1075-1078
• /
• 2002

This paper describes on the design structure and development of temperature stable strip-line function isolator operating In above resonance mode. Temperature characteristics of isolator depend on magnet, YIG(Yttium Iron Garnet) ferrite, and conductor etc. These require temperature stability and possible methods of compensation for the temperature dependent effects. In this paper, the analysis and measurement of the temperature characteristics were carried out for the material isolator prototype. The bandwidth of isolator was expended and the frequency shift at center was reduced in the temperature range of -20∼80$\^{C}$.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1679-1685
• /
• 2015

This paper examines the effect of the magnetization pattern on the partial demagnetization of a permanent magnet (PM) machine that uses a ferrite magnet. Although the use of halbach-magnetized PM (HMPM) arrays in PM machines has been dramatically increasing because of their attractive features, the demagnetization characteristics of HMPM arrays have not yet been examined. In this study, two analyses of the demagnetization characteristics of HMPM arrays and parallel magnetized PMs (PMPMs) are performed, with the demagnetization characteristics being analyzed using a finite element method. According to our results, partial demagnetization occurred dramatically in the HMPM arrays. Thus, it is important to consider the vulnerability of HMPM arrays when designing PM machines.

• 한국세라믹학회지
• /
• 제28권6호
• /
• pp.471-477
• /
• 1991

Effects of ZnO, PbO and SiO2 on the grain growth and magnetic properties of Sr-ferrite were investigated. (1) Addition of ZnO to Sr-ferrite increased remanence, but decreased coercivity and maximum energy product. (2) Addition of PbO up to 0.5 wt% increased (B$.$H)max of Sr-ferrite, but addition more than 0.5 wt% decreased (B$.$H)mzx (3) SiO2 addition to the 0.5 wt% PbO doped Sr-ferrite decreased remanence and increased coercivity. The coercivity increase in due to the grain refinement effect of SiO2. But addition of SiO2 more than 0.5 wt% invoked a decrease of coercivity and (B$.$H)max of Sr-ferrite due to abnormal grain growth. Sr-ferrite magnet having maximum energy product of 3.7MGOe was fabricated by using the roasting product of Pyrrhotite.