• 제목/요약/키워드: feed effect

검색결과 3,394건 처리시간 0.028초

곤충분말 사료를 오리사료에 첨가 시 생산성과 경제성에 대한 평가 (Growth Performance and Economic Evaluation of Insect Feed Powder-Fed Ducks)

  • 장우환;정태호;최인학
    • 한국환경과학회지
    • /
    • 제28권8호
    • /
    • pp.709-712
    • /
    • 2019
  • The effect of insect feed powder on the growth performance and economic evaluation of ducks was investigated. One hundred and twenty-old Pekin ducks were randomly assigned to two dietary treatments (0% and 1% Hermetia illucens powder) with three replicates of 20 birds each for 14-42 d. No significant (p>0.05) difference in growth performance between the control and 1% H. illucens powder was observed, except the feed conversion ratio (p<0.05), for the experimental period. The treatments with 1% H. illucens powder improved the economic indicators in comparison with the controls. Therefore, a diet supplemented with 1% H. illucens powder could significantly improve the feed conversion ratios and increase the economic indicators.

바인더 볏단의 크기가 자동탈곡기(自動脱糓機)의 탈곡성능(脱糓性能) 및 부하특성(負荷特性)에 미치는 영향(影響) (Effects of Binder-Sheaf Size on Threshing Performance and Load Characteristics of an Auto Feed Thresher)

  • 유수남;류관희
    • Journal of Biosystems Engineering
    • /
    • 제6권1호
    • /
    • pp.60-72
    • /
    • 1981
  • This study was carried out to find out the effects of the sheaf size of paddy harvested by the binders on the threshing performance, load characteristics and power requirement of an auto-feed thresher. The results of the study are summarized as follows: 1. The seperating performance of the thresher appeared to be satisfactory for all the sheaf sizes although the amount of rubbishes and empty grains slightly increased with the sheaf size of paddy. 2. There was no significant difference in grain output quality of the thresher among the three sheaf sizes. However, the amount of grains left unthreshed increased with the sheaf size. In the case of the largest sheaf size with the feed rate of 780kg/h, it exceeded the limit set by the national inspection regulations. 3. The position of the feed-chain rail gave a significant effect on the power requirement of the thresher. At the feed rate of 780kg/h, the net power required to convey sheafs through the feed chain was in the range of 0.37 to 0.50 PS for the middle and lowest position of feed-chain rail, and there was no significant difference among the sheaf sizes. At the highest position, however, it appeared that the smallest sheaf required more power than the others. The net power requirements at this position were 1.03, 0.59. 0.65 PS for the smallest, medium and largest sheafs respectively. 4. The torques of both the thresher and the engine shaft increased with the feed rate and were not affected by the sheaf size for the lower two feed rates of 520 and 780kg/h. At the highest feed rate of 1,040 kg/h, however, they were affected by the sheaf size. In this case, the medium sheaf size gave lower values than the others. 5. The variations in the thresher and the engine torque increased with the feed rate and were not affected by the sheaf size for the feed rate of 520kg/h. At the feed rate of 780kg/h, however, they increased with sheaf size. And at the feed rate of 1,040 kg/h, the torque variations increased greatly for all the sheaf sizes due to an over-load operating condition. 6. It appeared that the average and maximum power requirements of the thresher increased with the feed rate. But, there was no significant difference in power requirement among the sheaf sizes for the lower two feed rates. 7. The threshing efficiency of the thresher was in the range of 214-249 kg/ps.h with the feed rates of 520 and 780 kg/h, and it was not affected by both the sheaf size and the feed rate. At the feed rate of 1,040 kg/h, however, it decreased to as low as 171-174 kg/ps.h because of a sudden increase in power requirement. 8. The average power requirements of the engine were slightly higher than those of the thresher due to the slippage of flat belt between the thresher and engine. It appeared that power transmission from the engine to the thresher was maintained properly since slippages were moderately low with the range of 2.78 to 6.51% throughout the tests. 9. The specific fuel consumption of the engine (diesel 8PS) decreased as the feed rate increased. However, there was no significant reduction in specific fuel consumption as the feed rate increased above 780 kg/h.

  • PDF

Effects of Lactitol and Tributyrin on Growth Performance, Small Intestinal Morphology and Enzyme Activity in Weaned Pigs

  • Hou, Y.Q.;Liu, Y.L.;Hu, J.;Shen, W.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권10호
    • /
    • pp.1470-1477
    • /
    • 2006
  • One hundred and sixty crossbred pigs ($6.62{\pm}0.36kg$) weaned at day $18{\pm}1$ were used to investigate the effects of lactitol and tributyrin on performance, small intestinal morphology and enzyme activity. The pigs were assigned to one of five dietary groups (4 pens/diet with 8 pigs/pen) and were fed the negative control diet or the negative control diet supplemented with 10 g/kg glutamine (as a positive control), or 3 g/kg lactitol (${\beta}$-D-galactopyranosyl-($1{\rightarrow}4$)-D-sorbitol), or 5 g/kg tributyrin (butanoic acid 1,2,3-propanetriyl ester), or 3 g/kg lactitol+5 g/kg tributyrin. Body weight and feed intake were measured weekly during the 4-week study. On day 7, four pigs per dietary treatment were sacrificed to examine small intestinal morphology and enzyme activity. The results showed that: (1) Compared with the negative control diet, the positive control diet improved weight gain and feed efficiency during weeks 1-2 and over the entire study (p<0.05), and also decreased duodenal and ileal crypt depth (p<0.05), but did not alter intestinal enzyme activity (p>0.05). Lactitol improved feed efficiency during weeks 3-4 and over the entire study (p<0.05), but did not improve weight gain and feed intake, intestinal morphology or enzyme activity (p>0.05). Tributyrin improved weight gain and reduced feed/gain during weeks 3-4 and over the entire study. Tributyrin significantly decreased crypt depth in the duodenum and ileum, and increased duodenal lactase and ileal maltase activity (p<0.05). Lactitol+tributyrin increased weight gain during weeks 3-4 and over the entire study, and improved feed efficiency during weeks 1-2 and 3-4 and over the entire study (p<0.05). Lactitol+tributyrin increased the jejunal villus height, and decreased the duodenal and ileal crypt depth (p<0.05). Lactitol+tributyrin also increased jejunal lactase and sucrase activity (p<0.05). (2) Compared with the positive control, tributyrin improved weight gain and reduced feed/gain during weeks 3-4 (p<0.05), decreased the ileal crypt depth, and improved the duodenal lactase and sucrase activity (p<0.05). Lactitol+ tributyrin improved weight gain during weeks 3-4, improved feed efficiency during weeks 3-4 and over the entire study, increased the ileal villus height, and increased jejunal lactase, sucrase and maltase activity (p<0.05). These results showed that tributyrin improved performance, intestinal morphology and enzyme activity, while the effect of lactitol was very limited. These results also showed that, compared with glutamine, tributyrin was more effective in improving intestinal morphology and enzyme activity, and tributyrin exerted a superior effect in improving performance as weaning progressed. These observations suggest that, as a chemical for repairing intestinal atrophy, glutamine and tributyrin should be used in the first and second periods of the starter phase, respectively.

Effects of dietary probiotic, liquid feed and nutritional concentration on the growth performance, nutrient digestibility and fecal score of weaning piglets

  • Zhang, Song;Yoo, Dong Huy;Ao, Xiang;Kim, In Ho
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권10호
    • /
    • pp.1617-1623
    • /
    • 2020
  • Objective: This study was conducted to investigate the effects of dietary probiotic blend and liquid feed program at different nutritional densities on growth performance, nutrient digestibility, fecal score of weaning piglets. Methods: A total of 120 weaning pigs with an initial body weight of 7.05±0.93 kg per pig (21 days of age) were randomly allocated into 1 of the following 8 dietary treatments (3 replicates per treatment with 5 pigs per replicate) in a 2×2×2 factorial arrangement (nutrition levels: apparent metabolic energy [AME] = 3,500 kcal/kg, crude protein [CP] = 20% vs AME = 3,400 kcal/kg, CP = 19.42%; feed types:dry vs wet; probiotics levels: 0 mg/kg vs 300 mg/kg). Results: During d 5 to d 15, greater average daily gain (ADG) and average daily feed intake (ADFI) (p<0.05) were observed in probiotics treatments. During d 15 to d 25, gain:feed (G:F) ratio (p<0.05) were significantly improved in probiotics, wet feed and high nutrition diet. Moreover, two interactions i) between nutrition levels and feed types, and ii) between nutrition levels and probiotics were found in G:F ratio. Furthermore, there was a significant positive interaction on G:F among those 3 factors (p<0.05). Overall, increasing ADG, ADFI, and G:F ratio were detected in probiotics treatment significantly (p<0.05). Besides, an obvious reduction on fecal score was observed in probiotics treatment from d 0 to d 5 (p<0.05). There was an interactive effect on fecal score between feed types and nutrition concentrations from d 5 to d 25 (p<0.05). Conclusion: These results indicated that probiotics supplementation could benefit growth performance and reduce the frequency of watery feces. Besides, wet feed program (feed:water = 1:1.25) could improve the G:F. The effect of liquid feed or probiotic could be influenced by dietary nutrition density in weaned piglets. An increased value of G:F was obtained when wet feeding a high nutrition diet (100 kcal higher than NRC 2012 recommendations) was supplemented with probiotics for 15 to 25 days.

사료의 형태가 한우 거세우의 사료효율 및 도체성적에 미치는 영향 (Effect of Feed Type on Feed Efficiency and Carcass Characteristics of Hanwoo Steers)

  • 이귀예;조웅기;문여황
    • 농업생명과학연구
    • /
    • 제45권4호
    • /
    • pp.95-103
    • /
    • 2011
  • 본 연구는 한우 거세우 95두 (평균체중 226 kg)를 이용하여 농후사료와 조사료 분리급여구, TMR구 그리고 TMR을 발효시킨 F-TMR구로 나누어 22개월동안 사육하여 도축하였을 때, 사료효율, 도체성적 및 경제성분석에 미치는 영향을 조사하기 위하여 실시되었다. 건물 및 TDN 섭취량은 육 비육 각 단계별로 F-TMR구에서 가장 많았다 (p<0.05). F-TMR구의 경우, 일일증체량은 육성기에는 처리구중 가장 적었으나, 비육후기에는 타 처리구에 비해 약 48%나 높았다 (p<0.05), 사료효율은 전 육성비육기간 동안 비슷한 수준으로 유지되었다. 도체중과 배최장근단면적에서는 F-TMR 급여구에서 가장 높았으나 (p<0.05), 등지방두께가 가장 얇았던 (p<0.05) 분리급여구에서 육량지수와 육량 A등급 비율이 높았다. F-TMR구의 근내지방도가 타구에 비해 현저히 (p<0.05) 증가되어 육질 1+등급이상 출현율이 96%에 달하였다. 경제성 분석에서 사료비는 F-TMR구가 분리급여구에 비해 40%가 증가되었으나 증체량과 육질등급의 향상으로 인하여 순수익은 29%나 증가되었다.

Heat and mass transfer analysis in air gap membrane distillation process for desalination

  • Pangarkar, Bhausaheb L.;Sane, Mukund G.
    • Membrane and Water Treatment
    • /
    • 제2권3호
    • /
    • pp.159-173
    • /
    • 2011
  • The air gap membrane distillation (AGMD) process was applied for water desalination. The main objective of the present work was to study the heat and mass transfer mechanism of the process. The experiments were performed on a flat sheet module using aqueous NaCl solutions as a feed. The membrane employed was hydrophobic PTFE of pore size 0.22 ${\mu}m$. A mathematical model is proposed to evaluate the membrane mass transfer coefficient, thermal boundary layers' heat transfer coefficients, membrane / liquid interface temperatures and the temperature polarization coefficients. The mass transfer model was validated by the experimentally and fitted well with the combined Knudsen and molecular diffusion mechanism. The mass transfer coefficient increased with an increase in feed bulk temperature. The experimental parameters such as, feed temperature, 313 to 333 K, feed velocity, 0.8 to 1.8 m/s (turbulent flow region) were analyzed. The permeation fluxes increased with feed temperature and velocity. The effect of feed bulk temperature on the boundary layers' heat transfer coefficients was shown and fairly discussed. The temperature polarization coefficient increased with feed velocity and decreased with temperature. The values obtained were 0.56 to 0.82, indicating the effective heat transfer of the system. The fouling was observed during the 90 h experimental run in the application of natural ground water and seawater. The time dependent fouling resistance can be added in the total transport resistance.

USE OF MOLD INHIBITOR FOR FEED STORAGE AND IMPROVED CHICK PERFORMANCE

  • Nahm, K.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제4권3호
    • /
    • pp.285-291
    • /
    • 1991
  • Two experiments were conducted to evaluate the effect of mold inhibitor in the ration which had two different protein levels (18% and 12%) and two different particle sizes (80 or 40% of the particles in the ration less than 1.19 mm). The experimental diets with ave. 12.7% moisture which were treated at the level of 0.1% mold inhibitor were stored under 85% humidity and at $29{\pm}1^{\circ}C$ for 10 to 40 days. In experiment 1, after 40 days of storage the $CO_2$ production in the feed treated with mold inhibitor was higher (p < 0.01) than when 40% of the ration's panicle size was 1.19 mm. Aflatoxin production in the experimental diet with mold inhibitor was affected (p<0.05) by the levels of protein and the different particle size ranges after 40 days storage. The interaction of protein levels and particle size ranges on the anatoxin and $CO_2$ production was significant (p<0.05) at 40 days storage. In experiment 2, there was a decrease in total body weight gain and total feed intake observed in chicks fed the untreated diet of 18% protein with 40% of the particles in the ration less than 1.19 mm stored for 40 days. Feed conversion was depressed (p<0.05) in the chicks fed the untreated diets of both particle sizes. Particle size X types of feed interaction in feed conversion was significant (p<0.05).

자동탈곡기(自動脱穀機)의 공급율(供給率) 제어(制御)(I) -공급율(供給率)에 따른 부하(負荷) 특성(特性)- (Feed Rate Control for the Head-Feed Thresher)

  • 정창주;류관희;최영수
    • Journal of Biosystems Engineering
    • /
    • 제13권3호
    • /
    • pp.20-31
    • /
    • 1988
  • This study was undertaken to investigate the load characteristics of the head-feed thresher, which may be affected by various factors such as physical properties of grain, thresher design parameters and its operational condition. The study was conducted at an initial step toward developing an automatic feed-rate control system of the head-feed thresher. A microcomputer-based data acquisition system for the load-speed characteristic of the thresher-shaft and the rail-deflection of the feeding device in accordance with a varied feeding thickness was developed. The sensors being developed and used for sensing the torque and speed of the cylinder and the power-input-shaft and the feeding thickness showed a high accuracy. A microcomputer-based data acquisition system developed in this study was assessed as adequate for a rapid acquisition and analysis of data. The effect of the feed-rate on the torque and speed of the thresher shaft, when fed intermittently by bundles, affected not by the rice varieties but by the dryness of threshing material tested. When fed by the continuous constant thickness, the torque and speed of the cylinder due to the increase of the feed-rate or feeding thickness were given by the relation by the second order parabola.

  • PDF

외해 가두리 양식장용 먹이공급시스템 (Feed supply system for Fish farm in Ocean Sea)

  • 오진석
    • 한국항해항만학회지
    • /
    • 제34권10호
    • /
    • pp.793-797
    • /
    • 2010
  • 근해의 어족자원 고갈 및 수질오염은 수산양식 산업에 큰 영향을 미친다. 이러한 문제점을 해결하기 위하여 근해에서 외해로 양식장이 이동하고 있다. 외해 양식장은 근해보다 해상환경에 강인하게 개발되어야 하며, 안정적인 양식장 운영을 위해 원격 자동먹이 공급장치가 필요하다. 본 논문은 해상의 양식장에 적합한 원격 먹이공급시스템에 관하여 기술하고자 한다. 어류는 수온 및 어체 중량에 따라 먹이를 먹는 양이 변화한다. 해상 양식장의 경우 육상에 비하여 온도 변화가 크게 일어난다. 본 논문은 수온 및 어체 중량에 따라 먹이량을 계산하고 자동으로 먹이를 공급하는 시스템을 연구하였다. 모형을 활용한 먹이 공급 장치의 성능을 실험하였다.

Effect of different conditions on pervaporation dehydration in CA/NYL66 blend membrane

  • Kazemzadeh, Akram;Mousavi, Seyed M.;Mehrzad, Jamshid;Motavalizadehkakhky, Alireza;Hosseiny, Malihesadat
    • Membrane and Water Treatment
    • /
    • 제10권6호
    • /
    • pp.441-449
    • /
    • 2019
  • In this study, cellulose acetate (CA) / nylon66 (NYL66) (95/5) blend membranes with different thicknesses were prepared by a solvent evaporation method. The effects of membrane thickness (almost $7-25{\mu}m$), feed concentration (70-95 wt.% isopropanol), and feed temperature ($30-60^{\circ}C$) were investigated on the performance of membrane in the separation of isopropanol-water mixtures. With regard to the results of sorption experiments, it was found that the increase of feed temperature enhanced the overall sorption while by increasing feed concentration, the overall sorption passed through a maximum value at 70 wt. % isopropanol (IPA). The best separation factor 3080.51 was gained at high isopropanol concentration 95 wt.%, low feed temperature $30^{\circ}C$, and high membrane thickness $24.62{\mu}m$. Regarding the pervaporation separation index, the obtained results showed that proper values for the thickness of membrane, feed temperature, and isopropanol concentration in feed were $24.62{\mu}m$, $40^{\circ}C$, and 70 wt.%, respectively.