• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1552-1564
• /
• 1995

A fault detecting method of ternary logic is proposed by using the spectral coefficients of the Chrestenson function. Fault detecting conditions are derived for a stuck-at fault in case of single input, multiple inputs and internal lines in the ternary logic. The detecting conditions for min/max bridging faults are also considered. When using this fault analysis method, it is possible to detect faults without the test vector and minimize high volume memory for storing the vector and response data. Thus, the computational complexity for the test vector can be decreased.

• 조명전기설비학회논문지
• /
• 제13권2호
• /
• pp.80-87
• /
• 1999

본 논문은 신경회로망을 이용하여 배전선로상의 고저항 사고검출기법을 제안하였다. 다양한 토양에서 실시한 고저항 사고 데이터를 통해 $\upsilon-i$ 특성곡선을 얻고, 이 특성곡선으로 EMTP를 이용하여 고저항 사고를 모의하였다. 배전선로 고저항 사고검출을 위해 훈련 모델은 강자갈을 사용하였고, 토양의 조건을 달리하여 신경회로망의 사고검출 성능을 평가하였다. 신경회로망의 입력으로 사고 전류를 주파수 분석한 후, 이를 한 주기 평균하여 얻어진 짝.홀수 고조파, 기본파, 실효치 지수을 이용하였다. 신겨회로망의 검출성능을 테스트한 결과 제안된 방법이 뛰어남을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.344-346
• /
• 2001

The sharing of common corridors by electric power transmission lines and pipelines is becoming more common place. However, such corridor sharing can result in undesired coupling of electromagnetic energy from the power lines to the near facilities. During a fault on any of the transmission lines, energization of the earth by supporting structures near the fault can result in large voltages appearing locally between the earth and the steel wall of any nearby pipeline. This paper presents the outline of the tower footings for the transmission lines having been used in KEPCO and analyzes the earth resistance for operation method of the tower footing, that is contact presence for the anchor and reinforcing rob of the tower and foundation presence of the underground wiring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.30-32
• /
• 1994

This paper presents a new method for the computation of fault location in multi-terminal transmission lines. This technique based upon the distributed model of transmission lines to overcome the problems encountered in traditional approaches. This method uses, the magnitude of the differential currents at each terminal and also uses an algorithm an equivalent conversion from an multi-terminal to a 3 terminal system.

• 자원환경지질
• /
• 제53권5호
• /
• pp.597-608
• /
• 2020

규모 5 이상의 경주지진과 포항지진이 발생한 이후에도 한반도 남동부에서는 여전히 수백 건의 여진과 미소 지진이 발생하고 있다. 이러한 현상은 응력이 계속 작용하고 있다는 것을 의미하며, 또 다른 큰 지진이 발생할 수도 있음을 암시한다. 따라서 본 연구에서는 한반도 남동부 포항-울산지역의 심부 지질구조를 분석하기 위해 중력장 해석 방법을 사용하였다. 먼저 연구지역의 부족한 중력 데이터를 수집하기 위해, 중력 탐사를 시행하여 기존 자료보다 정밀한 부게 중력이상을 계산하였다. 중력이상 데이터를 바탕으로 역산 방법인 "곡률 분석 (Curvature analysis)"과 "오일러 곱풀기 방법(Euler deconvolution method)"을 이용하여, 한반도 남동부의 심부 단층의 위치 및 방향성과 최대 깊이를 분석하였다. 그 결과, 본 연구지역에는 최소 6개의 심부 단층(C1~C6)이 존재하는 것으로 해석된다. 심부 단층선 C1은 방향성과 위치가 연일구조선과 일치하는 것으로 보아, 연일구조선이 최대 약 4000m 깊이까지 이어져 있는 것으로 해석된다. 심부 단층선 C2는 여러 개의 분절된 단층들로 이루어져 있으며, 지표의 단층들과 잘 대비된다. 심부 단층선 C3, C4와 C5는 북서-남동 방향의 울산단층과 평행한 방향성을 가지는 것으로 분석되며, 초기 백악기에 남북 방향의 응력을 받아 형성되었으나 퇴적물에 덮여 지표에 드러나지 않는 것으로 판단된다. 심부 단층선 C6는 북동-남서 방향성을 가지며, 어일분지의 동쪽 경계단층이 심부로 이어져 있는 것으로 사료된다. 분석한 심부 단층선과 미소 지진 발생 현황을 대비한 결과, 심부 단층선 C1과 2018년~2019년 동안 한반도 남동부에서 발생한 미소 지진의 분포가 대략 일치하는 것을 확인하였다. 이는 심부에 존재하는 단층과 최근 발생하는 지진이 연관이 있다는 것을 시사한다.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1522-1530
• /
• 2008

This paper presents a discrete wavelet analysis based algorithm to address the fault impedance calculation under transient state in radial power distribution networks. The fault impedances have been derived under different fault conditions. Furthermore, a recursive fault distance estimation method is proposed utilizing the measured fault impedance and power line parameters. The proposed scheme can resolve the errors caused by the non-homogeneous power lines, the presence of lateral loads since, the fault impedance will always be updated with the recursive form. For the verification of the proposed scheme, a filed test has been peformed with varying fault resistances in the 22.9(kV) radial system. Power meters and fault locators were installed at the substation. It was figured out that the performance of the discrete wavelet and the recursive scheme are very good even for high fault resistance condition.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권1호
• /
• pp.43-48
• /
• 2022

Although the distribution system has been structured as complicated as a mesh in the past, the connection points for each line are always kept open, so that it is operated as a radial distribution system (RDS). For RDS, the line utilization rate is determined according to the maximum load on the line, and the utilization rate is usually kept low. In addition, when a fault occurs in the RDS, a power outage of about 3 to 5 minutes occurs until the fault section is separated, and the healthy section is transferred to another line. To improve the disadvantages of the RDS, research on the construction of a networked distribution system (NDS) that linking multiple lines is in progress. Compared to the RDS, the NDS has advantages such as increased facility utilization, load leveling, self-healing, increased capacity connected to distributed generator, and resolution of terminal voltage drop. However, when a fault occurs in the network distribution system, fault current can flow in from all connected lines, and the direction of fault current varies depending on the fault point, so a high-precision fault current direction determination method and high-speed communication are required. Therefore, in this paper, we propose an accurate fault current direction determination method by comparing the peak value polarity of the fault current in the event of a fault, and a communication-based protection coordination method using this method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.74_76
• /
• 2009

This paper presents a discrete wavelet analysis based algorithm to address the fault impedance calculation under transient state in radial power distribution networks. The fault impedances have been derived under different fault conditions. Furthermore, a recursive fault distance estimation method is proposed utilizing the measured fault impedance and power line parameters. The proposed scheme can resolve the errors caused by the non-homogeneous power lines, the presence of lateral loads since, the fault impedance will always be updated with the recursive form. For the verification of the proposed scheme, a filed test has been peformed with varying fault resistances in the 22.9(kV) radial system. Power meters and fault locators were installed at the substation. It was figured out that the performance of the discrete wavelet and the recursive scheme are very good even for high fault resistance condition.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권12호
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.60-67
• /
• 2014

Power system fault analysis is commonly based on well-known symmetrical component method, which describes power system elements by positive, negative and zero sequence impedance. The majority of fault in transmission lines is unbalanced fault, such as line-to-ground faults, so that both positive and zero sequence impedance is required for fault analysis. When unbalanced fault occurs, zero sequence current flows through earth and ground wires in overhead transmission systems and through cable sheaths and earth in underground transmission systems. Since zero sequence current distribution between cable sheath and earth is dependent on both sheath bondings and grounding configurations, care must be taken to calculate zero sequence impedance of underground cable transmission lines. In this paper, EMTP-based sequence impedance calculation method was described and applied to 345kV cable transmission systems. Calculation results showed that detailed circuit analysis is desirable to avoid possible errors of sequence impedance calculation resulted from various configuration of cable sheath bonding and grounding in underground cable transmission systems.