• 한국강구조학회 논문집
• /
• 제9권3호통권32호
• /
• pp.287-300
• /
• 1997

본 연구에서는 음향방출기술을 적용한 실내모형실험을 통하여 강판형교의 피로 취약부위에서의 결함을 효과적으로 검출할 수 있는 AE기법을 제시하였다. 잔존수명의 산정에 의해 부재간의 상대적인 취약도를 비교 분석하면 교량의 안전점검시 점검대상의 우선순위와 범위를 결정할 수 있어 보다 효율적인 AE기술의 적용이 가능함을 알 수 있었다. 경제적이고 효율적인 AE기술의 적용을 연구하기 위하여 실시한 실험을 통한 주파수 분석 결과 차량통행시 잡음은 100~200 kHz사이에 집중되었고 균열에서의 AE신호는 400~500kHz 사이에 편중됨을 알았다. 따라서 R30 센서가 강판형교의 결함검출에 적합한 센서라고 판단되었다. 균열을 도입하여 실험한 결과 모의 AE발생원에 의해 결정된 위치 표정방법이 실제 균열이 발생할 때에도 잘 적용되며, 하중의 증가와 균열의 진전길이 등을 AE신호의 발생빈도와 비교한 결과 거의 선형적으로 비례함이 밝혀졌다. 그리고. 강교량과 같은 대형구조물에 적합한 경제적이고 효율적인 위치표정방법도 실험을 통하여 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1248-1253
• /
• 2007

Urban transit or subway stations generally service for a long period of several decades. And, the urban transit or subway is public transportation which lots of people takes every day. During the service time, they are inevitably damaged from environmental corrosion, material aging, fatigue, and the coupling effects with long-term loads and extreme loads. The included damage accumulates and performance degenerates due to the above factors. They would inevitably reduce the resisting capacity of station against the disaster; even they result in collapse with the structural failure under extreme loads. And, if disaster such as earthquake, fire, etc. happens, it causes huge property damage and threatens the human lives. Because of these above reasons, the intelligent health surveillance system should be researched and developed for ensuring the safety of station. In this paper, the research plans of the intelligent health surveillance system of urban transit station are presented. And also, the development or establishment directions of this system are suggested.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.88-93
• /
• 1998

The service life of tools in metal forming process is to a large extent limited by wear, fatigue fracture and plastic deformation. In warm forging processes wear is the predominant factor for operating lives of tools. To predict tool life by wear, Archard's wear model is generally applied. Usually hardness of die is considered to be a function of temperature in Archard's wear model. But hardness of die is a function of not only temperature but also operating time of die. To consider softening of die by repeated operations, it is necessary to express hardness of dies by a function of temperatures and operating time. By experiment of reheating of dies, die softening curves were obtained. Finally modified Archard's wear model in which hardness of die was expressed as a function of main tempering curve was proposed.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.76-80
• /
• 2023

This study is about a service that allows people to naturally learn to bask in the sun, which is a habit to relieve depression. Modern people do not have enough time to bask in the sun due to their busy lives, and as a result, depression and fatigue are increasing day by day. Therefore, in order to relieve depression, there is a need for the development of technology to manage the schedule of sunlight basking so that users can experience sunlight more naturally. The sunlight service developed through this study can help you easily plan your sunlight schedule by recommending good dates, times, and locations for sunbathing. In addition, users can receive coins as much as they bask in the sun, and they can be motivated by the act of basking in the sun by raising their character with those coins.

• 한국도로학회논문집
• /
• 제10권2호
• /
• pp.1-13
• /
• 2008

본 연구에서는 다양한 아스팔트포장의 공용수명을 예측하기 위한 포장상태 평가의 사례를 제시하였다. ARAN(Automatic Road Analyzer)을 이용하여 균열 및 소성변형 감과 감전 포장의 표면파손 현황에 대한 조사를 실시하고 HPCI(Highway Pavement Condition Index)를 산정하였다. 포장 파손현황을 분석한 결과 가장 빈번한 형태의 파손은 Top-down 균열로 나타났다. FWD(Falling Weight Deflectometer)로부터 측정한 처짐데이터를 사용하여 포장의 탄성계수를 역산정하여 실내에서 구한 동탄성계수와 비교하였다. 그 결과를 역학적-경험적 방법과 AASHTO 93 설계법에 적용하여 포장의 지지력을 평가하였으며, 지지력은 설계수명 동안 충분한 것으로 평가되었다. 현재 포장의 주된 파손은 표층부의 Top-down 균열이므로 포장상태 평가로 계산된 HPCI와 기존 공용성 자료에 근거하여 포장의 잔존수명을 예측하였다. 포장상태 평가와 함께 포장의 조기파손 원인분석을 위해 대상구간의 코어 시편을 채취하여 공극률, 입도, 아스팔트 함량, 피로저항성 등의 물성을 측정하였다. 바인더를 태워 아스팔트 함량을 측정하는 방법은 현장시료의 경우 부정확한 것으로 나타났다. 실내시험결과 조기 균열이 발생한 가장 큰 이유는 다짐부족과 골재의 입도 부정확 등 시공시의 품질관리가 미흡한 것이 주된 원인으로 나타났다.

• 연구논문집
• /
• 통권23호
• /
• pp.127-140
• /
• 1993

The drive pulley, which is employed for loading and unloading raw materials in a steel mill, is usually manufactured by use of various welding processes. In this study the weldment in the pulley, in which TIG and $CO_2$ welding processes are used, has been analyzed from view point of fracture mechanics. Fracture toughness tests have been performed according to ASTM E813. A servo-hydraulic testing machine (10kN) has been employed. Also the crack propagation tests (Mode I) have been performed with compact tension specimen in compliance with ASTM E647. To predict the critical crack size in the weldment, finite element stress analysis for the drive pulley under real operating conditions have been performed. In addition, the residual stresses at the weldment and in heat-affected zone have been obtained by hole drilling method. The planar critical crack size have been predicted for the drive pulley by considering the stress analysis results and the residual stresses due to welding process. For the drive pulley considered in this study, it has been concluded that the most important factor in determining the critical crack size is the welding residual stress in the transverse direction. Also the effect of stress concentration at the root of the weldment have been noticeable. For the planar crack, the fatigue crack growth life from an initial crack size of 2mm to the critical crack size obtained as in the above have been predicted. The predicted lives were between 55, 900 and 72, 000 cycles depending on the shape of the elliptical crack. The predicted lives were in fairly good agreement for the drive pulley considered in this study.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.675-680
• /
• 2002

Cracking and bulging in welded and internally lined pressure vessels that work in thermal-mechanical cycling service have been well known problems in the petrochemical, power and nuclear industries. However, published literature and industry surveys show that similar problems have been occurring during the last 50 years. A better understanding of the causes of cracking and bulging causes is needed to improve the reliability of these pressure vessels. This study attempts to add information required for increasing the knowledge and fundamental understanding required. Typical examples of this problem are the coke drums in the delayed coking units refinery process. This case was selected for experimental work, field study and results comparison. Delayed coking units are among the refinery units that have higher economical yields. To shut down these units represents a high negative economical impact in refinery operations. Also, the maintenance costs associated with repairs are commonly very high. Cracking and bulging occurrences in the coke drums, most often at the weld areas, characterize the history of the operation of delayed coking units. To design and operate more robust coke drums with fewer problems, an improved metallurgical understanding of the cracking and bulging mechanisms is required. A methodology that is based field experience revision and metallurgical analyses for the screening of the most important variables, and subsequent finite element analyses to verify hypotheses and to rank the variables according to their impact on the coke drum lives has been developed. This indicated approach provides useful information for increasing coke drum reliability. The results of this work not only order the most important variables according to their impact in the life of the vessels, but also permit estimation of the life spans of coke drums. In conclusion, the current work shows that coke drums may fail as a combination of thermal fatigue and other degradation mechanisms such as: corrosion at high and low temperatures, detrimental metallurgical transformations and plastic deformation. It was also found that FEA is a very valuable tool for understanding cracking and bulging mechanisms in these services and for ranking the design, fabrication, operation and maintenance variables that affect coke drum reliability.

• Structural Engineering and Mechanics
• /
• 제74권2호
• /
• pp.157-173
• /
• 2020

In the finite element modelling of long-span cable-stayed bridges, there are a lot of uncertainties brought about by the complex structural configuration, material behaviour, boundary conditions, structural connections, etc. In order to reduce the discrepancies between the theoretical finite element model and the actual static and dynamic behaviour, updating is indispensable after establishment of the finite element model to provide a reliable baseline version for further analysis. Traditional sensitivity-based updating methods cannot support updating based on static and dynamic measurement data at the same time. The finite element model is required in every optimization iteration which limits the efficiency greatly. A convenient but accurate Kriging surrogate model for updating of the finite element model of cable-stayed bridge is proposed. First, a simple cable-stayed bridge is used to verify the method and the updating results of Kriging model are compared with those using the response surface model. Results show that Kriging model has higher accuracy than the response surface model. Then the method is utilized to update the model of a long-span cable-stayed bridge in Hong Kong. The natural frequencies are extracted using various methods from the ambient data collected by the Wind and Structural Health Monitoring System installed on the bridge. The maximum deflection records at two specific locations in the load test form the updating objective function. Finally, the fatigue lives of the structure at two cross sections are calculated with the finite element models before and after updating considering the mean stress effect. Results are compared with those calculated from the strain gauge data for verification.

• Journal of Preventive Medicine and Public Health
• /
• 제55권5호
• /
• pp.492-497
• /
• 2022

Objectives: Women experience more stress in middle age than in other periods of their lives. Therefore, health management programs that enable middle-aged women to cope with and manage stress are needed. This study investigated the psychological effects of a meditation-focused forest therapy program among 53 middle-aged women living in urban areas in Korea. Methods: Participants were divided into 2 groups: one group underwent the program for 3 days in a forest, followed by 3 days in an urban environment, and the other group underwent the program for 3 days in the urban environment, followed by 3 days in the forest. The psychological effects of the forest therapy program were evaluated using the Profile of Mood States-Brief (POMS-B). Differences in mood state before and after the program conducted in the forest (experimental group) and in the urban environment (control group) were evaluated using the paired-samples t-test. Results: The program in the forest significantly reduced tension, depression, anger, fatigue, and confusion among the domains of the POMS-B. The program in the urban area significantly reduced tension, but not depression, anger, fatigue, or confusion. Conclusions: Meditation-focused forest therapy programs are expected to contribute to promoting psychological health and enhancing the quality of life of middle-aged women.

• 한국전문물리치료학회지
• /
• 제30권3호
• /
• pp.221-229
• /
• 2023

Background: In modern society, the use of computers accounts for a large proportion of our daily lives. Although substantial research is being actively conducted on musculoskeletal diseases resulting from computer use, there has been a recent surge in interest in improving the working environment for prevention. Objects: This study aimed to examine the effects of posture correction feedback (PCF) on changes in neck posture and muscle activation during computer typing. Methods: The participants performed a computer typing task in two sessions, each lasting 16 minutes. The participant's dominant side was photographed and analyzed using ImageJ software to verify neck posture. Surface electromyography (EMG) was used to confirm the participant's cervical erector spinae (CES) and upper trapezius muscle activities. The EMG signal was analyzed using the percentage of reference voluntary contraction and amplitude probability distribution function (APDF). In the second session, visual and auditory feedback for posture correction was provided if the neck was flexed by more than 15° in the initial position during computer typing. A 20-minute rest period was provided between the two sessions. Results: The neck angle (p = 0.014), CES muscle activity (p = 0.008), and APDF (p = 0.015) showed significant differences depending on the presence of the PCF. Furthermore, significant differences were observed regarding the CES muscle activity (p = 0.001) and APDF (p = 0.002) over time. Conclusion: Our study showed that the feedback system can correct poor posture and reduces unnecessary muscle activation during computer work. The improved neck posture and reduced CES muscle activity observed in this study suggest that neck pain can be prevented. Based on these results, we suggest that the PCF system can be used to prevent neck pain.