• Journal of Oral Medicine and Pain
• /
• 제17권1호
• /
• pp.41-50
• /
• 1992

The authors performed a experimental study to evaluate the effects of masticatory muscle fatigue on tooth contact and masticatory muscle activity in 26 normal healthy women. The experimental masticatory muscle fatigue was induced by unilateral biting of 5kg force on mandibular first molar. The results were as follows : 1. The initial symptom related to muscle fatigue pain appeared in 85.19 seconds of isometric contraction and the endurance time of isometric contraction was 203.15 seconds. 2. The pain occurred more frequently in masseter region than in temporal region. In masseter pain the incidence was almost equal between both sides, whereas the temporal pain was more in contralateral side. 3. The spontaneity and the symmetry of tooth contact during maximum clenching were reduced after isometric unilateral biting. 4. After induction of experimental muscle fatigue, the EMG activities of masseter muscles of both sides and ipsilateral temporal muscle showed the tendency of decreasing activities. 5. The asymmetry indicies of masseter and temporal muscles were reduced after isometric bilateral biting.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제39권1호
• /
• pp.34-38
• /
• 2019

In this study, we investigated the effect of silkworm, and its by-products on exercise endurance, muscle mass, and fatigue recovery using ICR mice model. Powders of silkworm, pupae, dongchunghacho, and silk powder were suspended in water and feed to mice for 2 weeks. The forced swimming time was increased by 4.3, 4.1 and 2.8 seconds after silkworm, pupae, and dongchughacho administration compared to DW fed group. Increases in exercise ability were achieved by difference mechanism according to feeding materials. Pupae increased muscle mass by 129% compared with the control group which may effect on elongation of swimming time. Dongchunghacho improved the plasma concentrations of fatigue markers such as creatinine, blood urea nitrogen (BUN), and D-lactate. Silkworm administration showed dual effect, the muscle mass induction (114% vs. control) and anti-fatigue (plasma creatinine, BUN, and D-lactate were 63, 75, and 78% vs. con) effect which contributed most elongated swimming time. In conclusion, silkworm and its by-products including pupae and dongchunghacho with the predominant protein and bioactive components improved muscle mass and showed anti-fatigue effect which could promote exercise performance ability.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.9-23
• /
• 1995

The objectives of the study were twofole: (1) to investigate effects of rhythmic contraction and sustained contraction methods on recovery rate of isometric endurance capacity and (2) to compare aptterns of muscle recruitment of both arms observed during each contraction period. In the experiment, each of two subjects performed five successive rhythmic or sustained isometric contractions at 50% MVC with both arms to the point of fatigue, which was the failure to maintain the required tension. In making the contractions, the subjects stood erect with upper arms held at an angle of approximately 90 .deg. to the forearm. The interval between the successive contractions was kept constant at 3, 7, 20, or 40 minutes. Regardless of the contraction methods, the recovery rate was least at the shortest interval and was highest at the longest interval. However, a statistical analysis showed that the recovery rates for the rhythmic contractions were significantly lower than those for the sustained contractions throughout 4 different intervals. Furthermore, as the frequency of the rhythmic contractions per min, increased 4 to 6 times, the recovery rate of isometric endurance capacity decreased. From an EMG anglysis, recruitment pattern of the muscules of both arms was found to be common between two different contraction methods. The biceps muxcles of the upper arms played a major role in exerting 50% MVC, while the brachioradialis muscles of the forearms acted as synergists. As the contraction proceeded, the role of the biceps muscles as a prime mover lessened due to the fatigue. Then, the brachioradialis muscles exerted more strength to sustain 50% MVC. The implications of these finding were discussed.

• Animal Bioscience
• /
• 제36권2호
• /
• pp.307-314
• /
• 2023

Objective: Chicken essence and branched chain amino acid (BCAA) supplementation has been recognized to significantly relieve fatigue. To obtain chicken essence with high amounts of BCAA, spent hens herein was used to prepare dripped chicken essence (SCE) and compared with commercial dripped chicken essence (CCE) for in vivo anti-fatigue effect. Methods: To determine the effect on anti-fatigue by dripped chicken essence, the exhaustive swimming was performed. Thirty-two 7-week ICR mice were divided into four groups, which included the control group (CG), CCE, SCE-1X and SCE-2X. The mice were given daily oral administration (0.012 mL/g body weight/d). The fatigue index analysis was conducted weekly. Results: The results showed that SCE had a higher BCAA level as expected, and mice treated with dripped chicken essence (CCE and SCE) could significantly improve exercise performance. The lower blood lactate level, blood urea nitrogen level and creatine phosphokinase activity were found in the supplement of SCE group compared with the CCE group, which suggested that the SCE possessed strong anti-fatigue ability. This could possibly be due to the higher content of BCAA. Conclusion: In this study, SCE promoted recovery from physical fatigue in mice and elevated endurance ability. Among them, the double dose (SCE-2X) showed the strongest anti-fatigue ability. Taken together, spent chickens could be a good source of chicken essence to improve the effect of anti-fatigue.

• 한국강구조학회 논문집
• /
• 제21권1호
• /
• pp.55-62
• /
• 2009

강교 제작에는 강재 표면의 이물질 제거와 피복방식재료의 부착성 증대를 위하여 블라스트 표면처리가 실시되고 있다. 블라스트 표면처리는 쇼트나 그릿 등의 연마재를 압축공기로 분사하여 강재 표면에 충격을 가하는 표면처리법으로, 블라스트 처리에 의해 표면형상이 개선되고 압축잔류응력이 도입되어 용접이음의 피로수명이 향상될 것으로 예상된다. 본 연구에서는 하중비전달형 십자필렛 용접이음의 피로실험을 실시하여, 블라스트 표면처리가 용접이음의 피로거동에 미치는 영향을 실험적으로 검토하였다. 피로실험에는 용접 후 무처리 시험편(용접 그대로), 용접 후 블라스트 표면처리 한 시험편과 블라스트 처리 후 열처리에 의해 잔류응력을 제거한 시험편의 합계 3종류의 용접시험편을 대상으로 하였다. 그 결과 블라스트 표면처리에 의해 용접지단부의 곡률반경은 약 29% 증가하였으며, 용접지단부의 인장잔류응력이 제거되고 압축잔류응력이 도입되었다. 그리고 블라스트 처리에 의해 피로수명과 피로한계가 증가하였다. 피로수명은 응력범위가 낮을수록 더 크게 증가하였고, 피로한계는 약 1.5배 증가하였다.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.160-167
• /
• 2012

This paper is concerned with a particular fracture mechanics parameter ${\Delta}K_{th}$, known as the 'threshold stress intensity range', or 'fatigue threshold'. This threshold ${\Delta}K_{th}$ constitutes, as it were, a hinge between the notion of crack initiation and the notion of crack growth. It has often been thought that, like the endurance limit, it could be an intrinsic criterion of the material. The study was conducted on a SA-508 pressure vessel steel used in the nuclear power industry. This material exhibits a typical threshold effect in the range of the crack growth rates which were determined; that is, below approximately $da/dN=10^{-6}mm/cycle$, the slope of the da./dN versus ${\Delta}K$ curve is almost vertical. The value of ${\Delta}K_{th}$ was determined at a growth rate of $10^{-7}$ mm/cycle according to the ASTM Standard for threshold testing. The fatigue threshold values are in the range 21 $kg/mm^{3/2}$ to 12 $kg/mm^{3/2}$ depending on the stress ratio effect.

• 대한기계학회논문집A
• /
• 제29권5호
• /
• pp.663-670
• /
• 2005

DIN CK35 (JIS S35CK) steels have been used as a material in fuel pump blocks for marine engines. Failures in the inner surface of a drilling hole, due to the initiation of fatigue cracks have been frequently reported. However, the mechanism initiating these cracks and growths has not been clearly diagnosed yet. This study was conducted using a scraped fuel pump block, containing an initiated fatigue crack in the inner surface of a drilling hole. Initially, the cracks and fractured surfaces inside the block were investigated using an optical microscope and a SEM (Scanning Electron Microscope). In addition, microstructure observation, fatigue life test and fatigue crack growth test were performed using a specimen, which was taken from the same block. Results from these tests are summarized as follows; (1) The early crack in the block was supposed to occur inside the inner surface of the drilling hole. (2) The fatigue endurance of this material was about 330 Mpa. (3) The early crack was generated in the cavitations created by the breakdown of a big inclusion, or separation between the big inclusion and the base metal, in which the fundamental ingredients of the inclusion were C, 5, and Mn. (4) In order to prevent these types of failures, the suppression of inclusions inflow by improving the casting process, formation of fine inclusions by applying a heat treatment process, and coating of the surface of the drilling hole were required.

• 대한기계학회논문집A
• /
• 제26권2호
• /
• pp.374-379
• /
• 2002

Corrosion fatigue tests were carried out to clarify the influence of acid fog as environmental factor on the fatigue strength of SM55C using rotary bending fatigue tester. The fatigue strength of acid fog specimen extremely decreased about 80% compared to that of distilled water specimen. In acid fog environment, a number of cracks commenced at corrosion pit and coalesced with the adjacent cracks during they propagate, and they formed a single non-propagating circumferential crack under the endurance stress of N=5$\times$10$\^$7/ cycles. Also, the depth of the crack is smaller than that of normal fatigue crack, so the crack has a veil small aspect ratio. The reason of this peculiar crack growth characteristics is that the crack opening-closure behaviors are hindered by corrosion products on the surface crack faces, and hence it is thinkable that the strong corrosion action like anodic dissolution for crack growth in depth direction is weaker compared with surface, resulting from faint pumping action of crack during loading-shedding processes.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1287-1293
• /
• 2001

Fretting is a potential degradation mechanism of structural components and equipments exposed to various environments and loading conditions. The fretting degradation, for example, for example, can be observed in equipments of nuclear, fossil as well as petroleum chemical plants exposed to special environments and loading conditions. It is well known that a cast stainless steel(CF8M) used in a primary reactor coolant(RCS) degrades seriously when that material is exposed to temperature range from 290$\^{C}$∼390$\^{C}$ for long period. This degradation can be resulted into a catastrophical failure of components. In the present paper, the characteristics of the fretting fatigue are investigated using the artificially aged CF8M specimen. The specimen of CF8M are prepared by an artificially accelerated aging technique holding 180hr at 430$\^{C}$ respectively. Through the investigations, the simple fatigue endurance limit of the virgin specimen is not altered from that obtained from the fatigue tests imposed the fretting fatigue. The similar tests are performed using the degraded specimen. The results are not changed from those of the virgin specimen. The significant effects of fretting fatigue imposed on both virgin and degraded specimen on the fatigue strength are not found.

• Journal of Ginseng Research
• /
• 제32권3호
• /
• pp.210-219
• /
• 2008

본 연구는 8주간의 홍삼 투여가 중추피로 및 말초피로에 미치는 영향과 홍삼 투여와 지구성 트레이닝을 병행 했을 경우, 홍삼이 유 무산소성 운동수행능력에 미치는 영향을 관찰하였다. 그 결과 홍삼 섭취와 지구성 트레이닝을 병행하는 것이 홍삼 섭취와 지구성 트레이닝을 단독으로 적용하는 것 보다 유산소성 운동수행능력과 말초피로에 높은 효과를 기대할 수 있으며, 홍삼의 섭취가 중추피로에도 긍정적인 영향을 미칠 것으로 기대된다. 하지만, 무산소성 운동수행능력에는 큰 영향을 주지 못하는 것으로 생각된다. 이에, 본 연구를 통해 검증된 홍삼의 피로회복 및 운동수행능력 향상 효과는 추후 일반인뿐만 아니라 운동선수의 운동능력향상 보조물(Ergogenic aid)로써 도움을 줄 것으로 기대된다.