• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.69-82
• /
• 2004

Recently, in the food, paper, steel and plastic industries, plate or sheet type products have been produced by the rolling drum. Steam heating drums are introduced into plastic products facilities in order to keep the density, microstructure, and strength of material uniformly. The drum journal can not help being concentrated by stresses due to the bending and torsion. Especially the drum, heated by high pressure steam, might be exposed in the steam leakage accident. First of all, the stresses on the steam drum journal are to be analyzed, and a case study proper to the subject was performed with a scraped journal, in order to investigate the failure characteristics as well as the initiation and propagation of fatigue cracks, and most probable circumstances of crack initiation. As the result of this study, it is suggested that newly installed drum journal be thoroughly inspected at the next periodic maintenance intervals for evidence of cracking, the microstructure examination and hardness measurements to prevent steam drum from the failure accident.

• Journal of the Korean Society for Railway
• /
• v.3 no.2
• /
• pp.77-83
• /
• 2000

This study proposes the integrity evaluation of the bogie frame using ultrasonic fractography analysis. Analysis objectives in this study are to investigate fracture planes of damaged zone by the A-scan method. The surface condition of fracture planes shows degree of degradation by the stress concentration. The detection of the natural defects in the bogie frame is performed using the characteristics of echodynamic pattern in ultrasonic signal. Results of ultrasonic testing agree fairly well with those of actual fracture plane. In quantitative fractography analysis, microstructures of actual fracture plane turned out to be intergranular and transgranular fracture. Proposed ultrasonic fractography analysis in this study can be used for the integrity evaluation of the bogie frame.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.5
• /
• pp.259-265
• /
• 2024

In this paper, we propose an automatic display defect detection system using image processing. The existing inspection by operators has the disadvantage that human errors may occur due to the operator's skill level, fatigue, etc., and that standardization and quantification are difficult. It also has disadvantages such as the limited inspection speed and the cost of the operator's education. The proposed system automatically detects various display defects through image processing algorithms. It was developed based on the Jetson Nano, one of the most popular SBCs (Single Board Computers), and it has a conveyor belt to automatically moves the display to the inspection position. By providing a human machine interface (HMI), the operator can check the inspection information in real time, and control the inspection flow. By storing the inspection results as a log file, the operator can check the inspection results at any time, such as the time taken to perform each algorithm and the location of the detected defects. In addition, a multi-threaded structure was adopted. The camera's operations and inspection algorithms are executed in parallel in different threads, which can shorten the inspection time compared to the system based on a single-threaded structure. The experimental results prove the defect detection capability of the system and the efficiency of the inspection time.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.220-226
• /
• 2003

This paper presents the result of an investigation on the application of the acoustic emission method to the monitoring of fatigue crack initiation, growth and track location in welded joints. Fatigue test was carried out for a typical fillet welded joint of ship structure. AE parameter such as ring down count was analyzed in time domain and crack locations were examined by source location and cluster option which is one of the functions of AE signal processor The usability of AE mettled was confirmed for the detection of the initiation and location of through crack.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.331-334
• /
• 2000

This paper presents the method for the decision of eye states using the eye blink in video sequences. The entire procedure consists of two steps: in the first step, the accurate eye position is found in the input image by using symmetry information of faces and projection, and in the second step, the eye open/close state is decided by the horizontal and vertical projection. The method in this paper is also used for detecting drivers' fatigue in the drowsiness detection system.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.10a
• /
• pp.366-367
• /
• 2005

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.481-484
• /
• 2011

Recent Automotive technology is driven from mechanical device to the electronic components which improve the vehicle's safety and convenience. The future competitiveness of the car will come from safety issues and energy efficiency, convenience and the application of the technologies. In this study, various techniques for driver drowsiness detection are introduced and compared with each others. The advantages and disadvantages of commercially available technologies and developed technologies are compared. To enhance the detection resolution, multiple sensing technologies are introduced in this paper. The feasibility of two drowsiness detection methods, that is, existing camera image recognition method and bio signal analysis method, are tested. The direct drowsiness detection by the camera image of eyes and driver's vital signs detected indirectly are combined and analyzed by the developed noble algorithm for stress, fatigue, drowsiness detection with a more accurate high-drowsiness detection.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.161-164
• /
• 2002

Optical fiber vibrations sensors (OFVSs) and extrinsic Fabry-Perot interferometer (EFPI) were used in damage monitoring of fiber-metal laminates(FML). The optical fiber vibration sensor and EFPI were applied in order to detect and evaluate the strain, damage and failure of FML. Damages in composites, such as matrix cracks, delamination and fiber breakage may occur as a result of excessive load, fatigue and low-velocity impacts. Tensile test was performed with the measurement of optical signal and acoustic emission (AE). The signals of the optical fiber vibration sensor due to damages were quantitatively evaluated by wavelet transform. EFPI was less sensible to the damage signals compared with the optical fiber vibration sensor. It was found that damage information of comparable in quality to acoustic emission data could be obtained from the optical fiber vibration sensor signals.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.370-375
• /
• 2003

Optical fiber vibrations sensors (OFVSs) and extrinsic Fabry-Perot interferometer (EFPI) were used in damage monitoring of fiber-metal laminates(FML). The optical fiber vibration sensor and EFPI were applied in order to detect and evaluate the strain, damage and failure of FML. Damages in composites, such as matrix cracks, delamination and fiber breakage may occur as a result of excessive load, fatigue and low-velocity impacts. Tensile and indentation test was performed with the measurement of optical signal and acoustic emission (AE). The signals of the optical fiber vibration sensor due to damages were quantitatively evaluated by wavelet transform. It was found that damage information of comparable in quality to acoustic emission data could be obtained from the optical fiber vibration sensor signals.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.61-65
• /
• 2001

A new flaw detection technique using by SH angle beam method has been discussed. The SH-wave is horizontally polarized shear wave and the surface SH wave has a characteristic of traveling along near surface layer. The surface SH wave technique is valuable for the detection of fatigue cracks at fillet weld heels which cannot be detected by other ultrasonic technique such as angle beam technique and The dispersion curves of it has simple characterization. In this work, using these beneficial chraterization, quality evaluation of spot weld with ultrasonic sound intensity of SH-wave passing through nugget area of spot weld are verified experimentally.