• 수산해양기술연구
• /
• 제28권1호
• /
• pp.61-70
• /
• 1992

In this study, corrosion fatigue test of SAPH45 steel was performed by the use of plane bending fatigue tester in marine environment and investigated fracture surface growth behavior of base metal and heat affected zone corrosion fatigue. The main results obtained are as follows: 1) Fracture surface growth of heat affected zone (HAZ) is delayed more than that of base matel (BM), and they tend to faster in seawater than in air. 2) Corrosion sensitivity to corrosion fatigue life of HAZ is more susceptible than that of BM. 3)In the case of the corner crack by corrosion fatigue, the correlation between the propagation rate of fracture surface area(dA/dN) and stress intensity factor range(ΔK) for SAPH45 are applied to Paris rule as follows: dA/dN=C(ΔK) super(m) where m is the slope of the correlation, and is about 6.60-6.95 in air and about 6.33-6.41 in seawater respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1402-1405
• /
• 2003

The main object of this study was evaluated by the delamination damage for fiber stacking angle. Therefore, this work need to compare the shape of delamination for a different fiber stacking angie. So this study uses a method of fatigue test which was created [0]$_2$,[+45]$_2$[90]$_2$. The extension of the delamination zone formed between aluminium alloy and glass fiber-adhesive layer were measured by an ultrasonic C-scan image. As a result, the shapes of delamination zone don't depend upon the crack propagation. We could know that the delamination zone grew interaction between stress flow of fiber layer and crack driving force. Hence, the existing study were applied to the stress transfer, fiber bridging effect, delaminantion growth rate should need to the develop useful factor because of change of fiber stacking angle.

• 한국재료학회지
• /
• 제10권7호
• /
• pp.505-514
• /
• 2000

플라즈마 침탄한 저 탄소 Cr-Mo 강(0.176C-1.014Cr-0.387Mo)의 침탄 특성과 피로성질을 고찰하였다. 플라즈만 침탄한 시편의 유효경화깊이는 가스 침탄한 시편에 대해 상대적으로 침타나시간이 짧고 침탄온도가 낮음에도 불구하고 50%정도까지 증가되었다. 플라즈만 침탄시 유효경화깊이의 증가는 표면탄소농도의 증가와 같은 경향을 보였으며, 표면탄소농도의 증가와 같은 경향을 보였으며, 표면탄소농도의 증가율이 침탄시간의 증가에 따라 감소하였다. 플라즈만 침탄간의 피로한도는 가스 침탄강의 경우보다 높았다. 이를 표면근처의 미세구조, 경화깊이 잔류, 오스테나이트와 압축잔류응력으로 조사한 결과 경화깊이와 압축잔류응력의 차이가 거의 없었다. 따라서 플라즈만 침탄의 피로강도 향상은 가스침탄에 비해 표면이 상승층이 저감되어 표면에서의 미소균열의 발생 및 초기 균열 전파과정이 지연 되어진 것으로 판단된다. 파단면 관찰결과 표면에서 균열이 시작되고 플라즈마 침탄의 경우 입내파괴가 현저하였다.

• 수산해양기술연구
• /
• 제28권2호
• /
• pp.216-227
• /
• 1992

The corrosion rate, behavior of corrosion fatigue and characteristic of cathodic protection for SB41 were investigated by corrosion and corrosion control tests in seawater at laboratory and coast. The main result obtained are as the following; 1) The corrosion rate of base metal (BM) is about 28-37 mg/dm super(2) day in seawater of coast. 2) The correlation between the stress intensity factor range $\Delta$K and crack propagation rate da/dN for weldment follows paris' rule in seawater : da/dN=C($\Delta$K) super(m) where m is the slope of the correlation, and is 2.02 for BM and 1.75 for heat affected zone (HAZ) respectively. 3) The corrosion sensitivity of HAZ is more sensitive than that of BM under the low region of $\Delta$K. 4) With increase of bared surace area of cathode, cathodic protection potential is increased sharply.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.42-47
• /
• 2010

In this paper, the characteristics of contact surface damage due to fretting in a press-fitted shaft below the fretting fatigue limit are proposed by experimental methods. A series of fatigue tests and interrupted fatigue tests of small scale press-fitted specimen were carried out by using rotating bending fatigue test machine. Macroscopic and microscopic characteristics were examined using scanning electron microscope (SEM), optical microscope or profilometer. It is found that fretting fatigue cracks were initiated even under the fretting fatigue limit on the press-fitted shafts by fretting damage. The fatigue cracks of press-fitted shafts were initiated from the edge of contact surface and propagated inward in a semi-elliptical shape. Furthermore, the fretting wear rates at the contact edge are increased rapidly at the initial stage of total fatigue life. After steep increasing, the increase of wear rate is nearly constant under the load condition below the fretting fatigue limit. It is thus suggested that the fretting wear must be considered on the fatigue life evaluation because the fatigue crack nucleation and propagation process is strongly related to the evolution of surface profile by fretting wear in the press-fitted structures.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.809-815
• /
• 2017

압력용기 재료로 사용되는 STS 304강은 저온에서 기계적 특성이 우수하지만, 다른 합금과 비교하여 중량이 무겁다. 이러한 문제를 해결하는 방안으로 STS 304강에 콜드 스트레칭(Cold stretching)공법을 사용하는 방법이 있다. 본 연구에서는 ASME 규정에 따라 제작된 콜드 스트레칭 압력용기에서 직접 채취한 콜드 스트레칭부 및 용접부 시험편을 이용하여, 상온 및 $-170^{\circ}C$에서 응력비 0.1과 0.5에 대하여 컴플라이언스법을 이용하여 피로균열진전시험을 수행하였다. 시험결과, 용접부의 피로균열진전속도는 콜드 스트레칭부에 비해 동일 응력확대계수범위에서 빠른 것을 확인하였다. 이러한 결과는 콜드스트레칭 공법을 사용하여 제작한 STS강 압력용기 개발을 위한 기초자료로 활용될 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1398-1408
• /
• 2003

Tensile and LCF(low cycle fatigue) tests were carried out in air at wide temperature range 20$^{\circ}C$-750$^{\circ}C$ and strain rates of 1${\times}$10$\^$-4//s-1${\times}$10$\^$-2/ to ascertain the influence of strain rate on tensile and LCF properties of prior cold worked 316L stainless steel, especially focused on the DSA(dynamic strain aging) regime. Dynamic strain aging induced the change of tensile properties such as strength and ductility in the temperature region 250$^{\circ}C$-600$^{\circ}C$ and this temperature region well coincided with the negative strain rate sensitivity regime. Cyclic stress response at all test conditions was characterized by the initial hardening during a few cycles, followed by gradual softening until final failure. Temperature and strain rate dependence on cyclic softening behavior appears to result from the change of the cyclic plastic deformation mechanism and DSA effect. The DSA regimes between tensile and LCF loading conditions in terms of the negative strain rate sensitivity were well consistent with each other. The drastic reduction in fatigue resistance at elevated temperature was observed, and it was attributed to the effects of oxidation, creep and dynamic strain aging or interactions among them. Especially, in the DSA regime, dynamic strain aging accelerated the reduction of fatigue resistance by enhancing crack initiation and propagation.

• 대한토목학회논문집
• /
• 제4권2호
• /
• pp.133-142
• /
• 1984

횡방향(橫方向)과 종방향(縱方向), 대입열용접(大入熱鎔接)과 소입열용접(小入熱鎔接), 모재(母材)와 같은 강도(强度)의 용접재료(鎔接材料) 사용(使用)과 모재(母材)보다 낮은 강도(强度)의 용접재료(鎔接材料) 사용(使用) 등으로 서로 비교되는 용접(鎔接)이음의 소인장시험편(小引張試驗片)을 만들어서 피로시험(疲勞試驗)을 행하여 피로구열(疲勞龜裂) 진전속도(進展速度) ${\frac{da}{dN}}$와 구열선단(龜裂先端) 부근의 응력확대계수(應力擴大係數)의 변동범위(變動範圍) ${\Delta}K$와의 관계곡선(關係曲線)을 그려서 비교시험간(比較試驗間)의 모재(母材), 열영향부(熱影響部) 및 용착금속부(鎔着金屬部)로 구분, 혹은 지금까지의 연구자료(硏究資料) 등과 비교검토하였다. 이 결과, 다음과 같은 현상들을 알 수 있었다. 기본적(基本的)으로, 용접방향(鎔接方向), 용접입열량(鎔接入熱量), 용접재료(鎔接材料)의 강도(强度), 혹은 모재(母材), 열영향부(熱影響部) 및 용착금속부(鎔着金屬部)의 구분 등에 따라 ${\frac{da}{dN}}-{\Delta}K$관계에 큰 차이가 없었다. 다만, 첫째, 소재(素材)에 대한 경우에 비해 대개 처음은 같은 ${\Delta}K$에서 ${\frac{da}{dN}}$가 상당히 늦다가 점차 증가하여 중간쯤에서 같아진 후 끝 부분에서 같은 ${\Delta}K$에서${\frac{da}{dN}}$가 다소 빨라짐을 알 수 있었다. 둘째, 열영향부(熱影響部)에서 용접금속부(鎔接金屬部)로 진전(進展)하면서 ${\frac{da}{dN}}$가 다소 늦어지는 것을 알 수 있었다. 셋째, 용접방향(鎔接方向)과 구열방향(龜裂方向)이 평행인 경우가 직각인 경우에 비해, 모재(母材)와 같은 용접재료(鎔接材料)를 쓴 경우 소입열용접(小入熱鎔接)인 경우가 대입열용접(大入熱鎔接)인 경우에 비해, 모재(母材)보다 낮은 용접재료(鎔接材料)를 쓴 경우 대입열용접(大入熱鎔接)인 경우가 소입열용접(小入熱鎔接)인 경우에 비해, 대입열(大入熱)의 평행용접(鎔接)의 경우를 제외한 모든 용접(鎔接)에서 모재(母材)와 같은 강도(强度)의 용접재료(鎔接材料)를 쓴 경우가 모재(母材)보다 낮은 강도(强度)의 용접재료(鎔接材料)를 쓴 경우에 비해 ${\Delta}K$가 낮은 시기(時期)에 일찍 저속(低速)으로 구열(龜裂)이 시작되어 ${\Delta}K$의 큰 증가없이 ${\frac{da}{dN}}$가 빠르게 증가한 다음 다른 경우와 같은 성상(性狀)으로 진전됨을 알 수 있었다. 넷째, 소입열용접(小入熱鎔接)의 경우 평행용접(鎔接)이 직각용접(鎔接)에 비해, 소입열용접(小入熱鎔接)이 대입열용접(大入熱鎔接)에 비해 같은 ${\Delta}K$에서 ${\frac{da}{dN}}$가 다소 늦은 것을 알 수 있었다.

• 열처리공학회지
• /
• 제24권2호
• /
• pp.92-98
• /
• 2011

The influence of the cooling condition after solution treatment on the high temperature fatigue resistance of 23Cr-26Ni heat resistant steel was investigated. Two different cooling conditions were applied to the steel after solution treatment at $1200^{\circ}C$ for 3 hours. One specimen was water quenched immediately after the solution treatment. The other one was furnace cooled at a rate of $0.5^{\circ}C/min$ down to $750^{\circ}C$ after the solution treatment. Then, both specimens were aged at $750^{\circ}C$ for 5 hours. Under two different heat treatment conditions, the low cycle fatigue (LCF) test was performed at $600^{\circ}C$ and room temperature (RT). Only cyclic hardening continued from the beginning until fracture at all strain amplitudes during LCF at $600^{\circ}C$. This phenomenon was attributed to the increase in the dislocation density due to cyclic deformation, which resulted in the interaction between the newly created dislocations and precipitates. Cyclic hardening followed by saturation and cyclic softening was observed at RT. Cyclic softening was attributed to the dislocation annihilation rate exceeding the dislocation generation rate. Other probable factor for cyclic softening was some cavities formed around grain boundaries after 20 cycles. WQ and FC have a similar LCF behavior at RT and $600^{\circ}C$ as shown in the cyclic stress response curves.

• Steel and Composite Structures
• /
• 제35권6호
• /
• pp.799-813
• /
• 2020

Fatigue cracks of rib-to-deck (RD) joints have been frequently observed in the orthotropic steel decks (OSD) using conventional U-ribs (CU). Thickened edge U-rib (TEU) is proposed to enhance the fatigue strength of RD joints, and its effectiveness has been proved through fatigue tests. In-depth full-scale tests are further carried out to investigate both the fatigue strength and fractography of RD joints. Based on the test result, the mean fatigue strength of TEU specimens is 21% and 17% higher than that of CU specimens in terms of nominal and hot spot stress, respectively. Meanwhile, the development of fatigue cracks has been measured using the strain gauges installed along the welded joint. It is found that such the crack remains almost in semi-elliptical shape during the initiation and propagation. For the further application of TEUs, the design curve under the specific survival rate is required for the RD joints using TEUs. Since the fatigue strength of welded joints is highly scattered, the design curves derived by using the limited test data only are not reliable enough to be used as the reference. On this ground, an experiment-numerical hybrid approach is employed. Basing on the fatigue test, a probabilistic assessment model has been established to predict the fatigue strength of RD joints. In the model, the randomness in material properties, initial flaws and local geometries has been taken into consideration. The multiple-site initiation and coalescence of fatigue cracks are also considered to improve the accuracy. Validation of the model has been rigorously conducted using the test data. By extending the validated model, large-scale databases of fatigue life could be generated in a short period. Through the regression analysis on the generated database, design curves of the RD joint have been derived under the 95% survival rate. As the result, FAT 85 and FAT 110 curves with the power index m of 2.89 are recommended in the fatigue evaluation on the RD joint using TEUs in terms of nominal stress and hot spot stress respectively. Meanwhile, FAT 70 and FAT 90 curves with m of 2.92 are suggested in the evaluation on the RD joint using CUs in terms of nominal stress and hot spot stress, respectively.