• 수산해양기술연구
• /
• 제26권2호
• /
• pp.204-212
• /
• 1990

The SMC composite, now being considered in certain structural applications, is anticipated to experience repeated loading during service. Thus, understanding of the fatigue behavior is essential in proper use of the composite material. In this paper, using the SMC composite composed of E-glass chopped strand and unsaturated polyester resin three point bending fatigue tests are carried out to investigate the fatigue crack propagating behavior under various cyclic stresses and fatigue damage of various microcrack forms. The following results are obtained from this study; 1) Most of the total fatigue life of the SMC composite is consumed at the initial extension or the growth of the macroscopic crack. 2) A Paris' type power-law relationship between the crack propagation rate and stress intensity factor range is obtained, and the value of material constant m is much higher (m=9~11)than that of other metals. 3) In case of high cyclic stress the fatigue damage show high microcrack density and short crack length, but in case of low cyclic stress does it vice versa. 4) Fatigue damage is characterized by microcrack density, crack length and distribution of crack orientation.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1315-1320
• /
• 2005

TiNi alloy fiber was used to recover the original shape of materials using its shape memory effect. The shape memory alloy plays an important role within the metal matrix composite. The shape memory alloy can control the crack propagation in metal matrix composite, and improve the tensile strength of the composite. In this study, TiNi/A16061 shape memory alloy(SMA) composite was fabricated by hot press method, and pressed by a roller for its strength improvement. The four kinds of specimens were fabricated with $0\%,\;3.2\%,\;5.2\%\;and\;7\%$ and volume fraction of TiNi alloy fiber, respectively. A fatigue test has performed to evaluate the crack initiation and propagation for the TiNi/A16061 SMA composite fabricated by かis method. In order to study the shape memory effect of the TiNi alloy fiber, the test has also done under both conditions of the room temperature and high temperature. The relationship between the crack growth rate and the stress intensity factor was clarified for the composite, and the cold rolling effect was also studied.

• Advanced Composite Materials
• /
• 제16권2호
• /
• pp.151-166
• /
• 2007

High-cycle fatigue characteristics of quasi-isotropic carbon fiber reinforced plastic (CFRP) laminates [-45/0/45/90]s up to $10^8$ cycles were investigated. To assess the fatigue behavior in the high-cycle region, fatigue tests were conducted at a frequency of 100 Hz, since it is difficult to investigate the fatigue characteristics in high-cycle at 5 Hz. Then, the damage behavior of the specimen was observed with a microscope, soft X-ray photography and a 3D ultrasonic inspection system. In this study, to evaluate quantitative characteristics of both transverse crack propagation and delamination growth in the high-cycle region, the energy release rate associated with damage growth in the width direction was calculated. Transverse crack propagation and delamination growth in the width direction were evaluated based on a modified Paris law approach. The results revealed that transverse crack propagation delayed under the test conditions of less than ${\sigma}_{max}/{\sigma}_b$ = 0.3 of the applied stress level.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.129-136
• /
• 2018

대형 용접 구조물에 대한 피로설계 수명의 예측은 일반적으로 Palmgren Miner과 등가손상도 방법 또는 선형누적손상도 방법을 사용한다. 또한 용접 구조물에서 피로 균열이 발생되면 잔존 수명은 S-N 곡선과 선형 파괴역학에 기초하여 예측되고 있다. 본 연구에서는 면외거셋 용접이음의 3차원 피로균열 진전거동과 피로수명을 예측하기 위하여 피로 시험을 실시하였다. 면외거셋 용접이음의 3차원 피로균열진전해석은 NX NASTRAN 및 FRANC3D를 이용하여 유한요소 해석을 실시하였다. 면외거셋 용접이음의 균열 형상비, 초기균열 크기 및 응력비에 미치는 영향을 검토하기 위하여 피로균열진전 해석을 실시하였다. 또한 초기균열크기, 균열 형상비와 응력비의 변화에 따른 3차원 피로균열진전 해석 결과와 피로시험결과를 비교하였다. 피로균열진전 해석결과, 피로균열 진전속도와 응력확대계수와의 관계에서 피로시험과 유사하게 나타남을 확인하였으며, 면외거셋 용접이음의 피로수명을 추정할 수 있음을 확인하였다.

• 한국해양공학회지
• /
• 제4권2호
• /
• pp.100-111
• /
• 1990

In this paper, fatigue tests were carried out at stress test levels of 461 MPa, 441 MPa, and 431 MPa by using smooth specimen of$2_{1/4}$ Cr-1 Mo steel with the stress ratio(R) of 0.05. The initiation, growth and coalescense process of the major cracks and sub-cracks among the fatigue cracks on the smooth specimen are investigated and measured under each stress level at a constant cycle ratio by the replica technique with optical microscope. Some of the important results are as follows: In spite of the difference of stress levels, the major crack data gather into a small band in the curve of surface crack length and crack depth against cycle ratio N/Nf. The sub-crack data, however, deviate from the band of the major crack. The growth rates, da/dN, of major and sub-crack plotted against the stress intensity factor range, ${\Delta}K$, have the tendency to be compressed on a relatively small band. But it is more effective to predict fatigue life through major cracks. The propagation behavior of surface microcracks on the smooth specimens coincides with that of the specimen having an artificial small surface defect or through crack.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.76-84
• /
• 1991

본 연구는 피로수명 평가를 위한 새로운 파괴역학적 parameter의 확립에 관한 연구이다. 실질적으로 피로파괴가 일어나는 피로 균열선단의 국소영역에서 변형분포를 미소원형격자측정법을 이용하여 실험적으로 명확히 밝혀내었다. 그리고 이 결과를 기초로 하여 국소피로 변형율장을 대표할 수 있는 피로변형율 확대계수 $\Delta$A를 제안하였다. 또한 새로운 parameter $\Delta$A의 유효성을 여러 피로조건에서 검토한 결과, 균열선단 국소 영역에서 피로 변형율 확대계수 $\Delta$A에 의하여 피로 균열전파 속도평가를 일의적으로 나타낼 수 있음을 확인하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권10호
• /
• pp.1380-1385
• /
• 2001

This paper evaluates the fatigue fracture behavior of a chopped strand glass mat/polyester composite both in ai, and sea water, Bending fatigue (R=-1) was performed on dry and wet specimens, that is respectively in air and sea water. Where the pH concentration of sea water was controlled to 6.0,8.2, 10.0 and the wet specimens were immersed in the sea waters for 4 months. Throughout the tests, fatigue cracks both in the dry and wet specimens, tested in the air or sea water, occurred at the beginning of the cycle, followed by either of two regions one decreasing and the other increasing as the crack growth rate increases.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.313-320
• /
• 2019

A typical wear pattern was reported to resemble the fatigue crack growth behavior considering its mechanism, especially for amorphous rubbers such as styrene-butadiene rubber (SBR). In this study, the wear and crack growth rates were correlated using two separate experiments for carbon black and silica-reinforced selected rubber compounds. The wear rate was determined using a blade-type abrasion tester, where the frictional energy input during wearing was measured. The crack propagation rate was determined under different tearing energy inputs using a home-made fatigue tester, with a pure-shear test specimen containing pre-cracks. The rates of abrasion and crack propagation were plotted on a log-log scale as a function of frictional and tearing energies, respectively. Reasonable agreement was observed, indicating that the major mechanism of the abrasion pattern involved repeated crack propagation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.585-586
• /
• 2008

• 대한기계학회논문집
• /
• 제15권5호
• /
• pp.1635-1639
• /
• 1991

본 연구에서는 제1보에서의 수법을 이용하여 초기크랙길이의 분포를 고려한 재료의 불확정성 평가수법을 제시하고자 한다.