• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.748-755
• /
• 2018

Timber from fast-growing tree species is susceptible to by biodeterioration attack, particularly subterranean termites. Impregnation with methyl methacrylate (MMA) potentially increases wood resistance to subterranean termite attack. Four wood species, namely sengon (Falcataria moluccana), jabon (Anthocephalus cadamba), mangium (Acacia mangium), and pine (Pinus merkusii), were impregnated with MMA, and samples of untreated and imidacloprid-preserved wood were prepared for comparison purposes. Small stakes, sized 0.8 cm by 2 cm in cross section by 20 cm in the longitudinal direction, were inserted into the ground for 3 months, and the weight loss of each specimen was determined at the end of the test period. A factorial $4{\times}3$ completely randomized design was used for data analysis; the first factor was wood species, and the second factor was treatment. The results showed that MMA polymer loadings were 27.88%, 24.91%, 14.14%, and 17.81% for sengon, jabon, mangium, and pine, respectively, and amounts of imidacloprid retention were $7.56kg/m^3$, $5.98kg/m^3$, $5.34kg/m^3$, and $9.53kg/m^3$, respectively. According to an analysis of variance, wood species, treatment, and interaction of both factors significantly affected the weight loss of wood specimens. Mangium had the smallest weight loss, followed by pine, sengon, and jabon. MMA impregnation into the wood increased the resistance of wood samples to subterranean termite attack during in-ground testing, but the resistance level was lower than that of imidacloprid-preserved wood. Except for mangium wood, the MMA treatment did not significantly affect resistance.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.411-419
• /
• 2008

Xylia xylocarpa is fast-growing trees that are currently planted on trial basis in Sabah, Malaysia. The wood quality of trees grown in Sabah may differ from those grown in other places due to the environmental factors. Five 9-year-old trees of each species were extracted from their respective plots at Luasong, Tawau. Wood specimens were prepared from three height levels; bottom, middle and top, at the inner and outer radial positions. The within-tree and between-tree variations of physical properties of these species were analyzed. The basic density, oven-dry density and green moisture content(MC) are 0.72g/$cm^3$, 0.78g/$cm^3$ and 49.8% respectively. The shrinkage from green to oven-dry conditions for the radial and tangential directions were 3.35% and 5.76%, respectively. The trends of within-tree variations for most properties were more consistent in radial rather than vertical direction. This suggests diameter growth to be a more important factor contributing to the variations compared to height. Samples from the outer part of the stem were found to have higher density, shrinkage and mechanical strengths. The between-trees variations of some wood properties were found to be significantly different, probably due to genetic and micro-environmental factors. Significant correlation was recorded among the physical properties of the species. The true potential of X. xylocarpa for end-uses would be enhanced by further research such as the study on properties of wood from different sites and other properties like durability, seasoning, processing and machining characteristics. The characteristics of X. xylocarpa are comparable to a number of local popular hardwood species, indicating its suitability for heavy construction uses.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.12
• /
• pp.1270-1279
• /
• 2011

Bealmijang is a short-term aged paste made from meju, which is a brick of fermented soybeans and other ingredients. Different types of bealmijang are available depending on the geographic region or ingredients used. However, no study has clarified the microbial diversity of these types. We identified 17 and 14 fungal species from black soybean meju (BSM) and buckwheat meju (BWM), respectively, on the basis of morphology, culture characteristics, and internal transcribed spacer and ${\beta}$-tubulin gene sequencing. In both meju, Aspergillus oryzae, Rhizopus oryzae, Penicillium polonicum, P. steckii, Cladosporium tenuissimum, C. cladosporioides, C. uredinicola, and yeast species Pichia burtonii were commonly found. Moreover, A. flavus, A. niger, P. crustosum, P. citrinum, Eurotium niveoglaucum, Absidia corymbifera, Setomelanomma holmii, Cladosporium spp. and unclassified species were identified from BSM. A. clavatus, Mucor circinelloides, M. racemosus, P. brevicompactum, Davidiella tassiana, and Cladosporium spp. were isolated from BWM. Fast growing Zygomycetous fungi is considered important for the early stage of meju fermentation, and A. oryae and A. niger might play a pivotal role in meju fermentation owing to their excellent enzyme productive activities. It is supposed that Penicillium sp. and Pichia burtonii could contribute to the flavor of the final food products. Identification of this fungal diversity will be useful for understanding the microbiota that participate in meju fermentation, and these fungal isolates can be utilized in the fermented foods and biotechnology industries.

• The Korean Journal of Mycology
• /
• v.6 no.2
• /
• pp.25-30
• /
• 1978

Present experiments were conducted to determine the possibility of cultivation of 9 edible wild species selected among the higher fungi growing in Korea. In the investigation on the mycelial growth according t6o the different media, the mycelial growth of Coprinus comatus was fast on the CSA medium, when malt extract was added to the basal medium PSA, the mycelial of Lapista nuda and Auricularia auricula-judae was fast in growth and density. In the spawning, the mycelial growth of Pholiota squarrosa on the oak tree's sawdust, Pleurotus cornucopiae on the broad-leaves' sawdust, and Coprinus comatus on the compost was respectably fast and also it shown to be possibility of artificial cultivation owing to their carporphore budding when Coprinus comatus and Lepiota alborubescens cultivated on the rice straw, Auricularia auriculajudae and Pleurotus cornucopiae on the sawdust of the popla and Pholiota squarrosaon the sawdust of the oak tree.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.112-120
• /
• 2006

It is possible to divide the historical changes of slope revegetation in Japan into five periods as follows; 1) The early period after creation(1927-1948), 2) The spreading period of modern revegetation work with manpower(1947-1958), 3) The spreading period of rapid revegetation technique using exotic grasses with machineries(1959-1985${\dots}$), 4) The spreading period of rapid reforestation technique by fast growing species mainly using leguminous shrub species(1986-1995${\dots}$), 5) The developing period of nature restoration technique using endemic arborous species(1996-). Recently main purpose of slope revegetation has been developing from the erosion protection to the nature restoration in the current of the 5th period. It is said that the role of the Japanese Society of Revegetation Technology(JSRT) is critical to the history of slope revegetation in Japan. 'The tentative guidelines of slope nature restoration' was announced by JSRT in 2004. In the guidelines, it was proposed that the planning techniques of using suitable seeds/plants based on the preservation level at the each construction sites. Moreover, the use of soil seed bank is the new and important study theme in the field of nature restoration. Consequently, at present the importance of advanced monitoring methods for vegetation maintenance and plant sociologic survey to evaluate the plant succession is increasing. Finally, some critical concepts are necessary to develop the field of restoration in Korea as follows; 1) monitoring of constructed sites, 2) ensuring of biodiversity, 3) recognition of slow revegetation and mosaic arrangement in revegetation, 4) reuse and recycle on the construction sites, and 5) promotion of specialist.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.2
• /
• pp.83-89
• /
• 2005

The historical changes of seeding work in Japan, the typical slope revegetation method, is possible to divide into five periods as follows; 1) The early period after creation(1927-1948) 2) The spreading period of modern revegetation work with manpower(1947-1958) 3) The spreading period of rapid revegetation technique using exotic grasses with machineries(1959-1985${\dots}$) 4) The spreading period of rapid reforestation technique by fast growing species mainly using leguminous shrub species(1986-1995${\dots}$) 5)The developing period of nature restoration technique using endemic arborous species(1996-) The evaluation basis of vegetated condition after slope seeding has been described to a official guide book, "The Standards of Slope Stabilizing Works" It was mainly revised three times after first edition in 1972, and also the point of evaluation basis changed from the vegetation coverage to the density of woody plant through the 3rd period and the 4th period Recently main purpose of slope seeding has been developing from the erosion protection to the nature restoration in the current of the 5th period, and "The tentative guidelines of slope nature restoration" was announced by The Slope Revegetation Section of Japanese Society of Revegetation Technology in 2004. It was proposed the planning techniques of using suitable seeds/plants based on the preservation level at the real each construction sites Consequently, at present the importance of advanced monitoring methods for vegetation maintenance and plant sociologic survey to evaluate the plant succession is increasing.

• Journal of Korean Society of Forest Science
• /
• v.86 no.1
• /
• pp.1-8
• /
• 1997

Second year results are presented from a trial designed to quantify the reduction in radiata pine(Pinus radiata D. Don) seedling growth caused by competition from a range of important weed species on a moist North Island site in New Zealand. Radiates pine seedlings(1/0) were grown on the weed free control and with either herbaceous broadleaves, grass, broom, pampas, buddleia, or gorse. Resource(nutrient and water) levels were varied by factorial +/- irrigation and fertilizer treatments. Radiata pine seedling volume growth 21 months after planting was greatest when it was grown on the weed free control or in association with gorse, and was least when grown with either buddleia or pampas. There was no evidence that the effects of the weeds on seedling growth were mediated by either competition for water or nutrients. Tall, fast-growing species that overtopped the seedlings(broom, buddleia, pampas) had the greatest effect on seedling growth and the magnitude of the effect was correlated with degree of overtopping. This implies that shading or competition for light is probably an important factor.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.1
• /
• pp.70-86
• /
• 2024

Termites are a serious threat to wood-based products in Indonesia. This study investigated the termite resistant property of glulam made from polystyrene-modified wood. Three tropical fast-growing wood species, namely mangium (Acacia mangium), manii (Maesopsis eminii), and rubberwood (Hevea brasiliensis), were prepared for flat-sawn laminae. After getting air-dried condition, the laminae were impregnated with polystyrene using potassium peroxydisulphate as a catalyst followed by polymerization at 80℃. Polystyrene-impregnated and control glued-laminated lumbers (glulams) were manufactured, and solid wood was provided. Three wood species and three wood products with six replicates were exposed in a field in Bogor, Indonesia, for four months, and before the tests, their density and moisture content were measured. At the end of the field tests, the weight loss and protection levels of each test sample were determined. A completely randomized factorial design was used for data analysis. The weight percentage gains for mangium, manii, and rubberwood were 22.30%, 18.22%, and 10.44%, respectively. The results showed that manii belonged to low-density wood, whereas the other two woods were medium-density wood, and the moisture content was the ambient moisture content, typical of the Bogor area. Regarding weight loss and protection level, mangium was the most durable against subterranean termite attacks, followed by rubberwood and manii. Among the wood products, the polystyrene-impregnated glulam presented the highest durability, followed by the control glulam and solid wood. Therefore, mangium and rubberwood polystyrene-impregnated glulams are recommended for future product development.

• The Korean Journal of Ecology
• /
• v.23 no.3
• /
• pp.223-229
• /
• 2000

To develop the restoration technique from urban planted forest to natural forest, sprout growth and its effects on vegetation composition in the early stage after lumbering, were studied, using only Populus albaglandulosa of the tree layer in Chungdam Park Chungdam-dong, Kangnam-gu, Seoul during the two years from 1997 to 1998. The results were as follow. After lumbering, the more basal areas of the parent stump, the more sprouts were generated. The basal area of parent stump was related more to biomass than to the number of sprouts. In the cutting area, biomasses of sprouts were 552.7 g?DW/㎡ in first year and 8.7 g?DW/㎡ in second year after lumbering. Therefore, cutting of sprouts in first year resulted in decrease of sprout production in second year. In the non-cutting area, biomass of sprouts was 657.4 g?DW/㎡ and more than that of the experiment. Especially, 2-year sprouts grew to a 304 cm height by the end of the growing season in the second year. The growing season of sprouts was from early April to early September and almost all the leaves of the sprouts remained at the end of the growing season. Specific leaf area decreased along with time elapse and plant height but the differences were not conspicuous. Therefore, it is thought that the reason why p. albaglandulosa sprouts grew fast was due to a long growing period and lower layer leaves which remained at the end of the growing season. In the cutting area of the P. albaglandulosa sprouts, there were no changes in the number of species in the shrub layer but an conspicuous increase in the herb layer. Coverage was no changes in the shrub layer but an increase in the herb layer. In the non-cutting area of P albaglandulosa sprouts, the number of species and the coverage changed a little, and the main species of the herb layer were Phytolacca americana, Eupatorium rugosum and Panicum dichotomiflorum, which are tall plant species.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.206-214
• /
• 2011

Fifteen clones of poplars, 2 clones of willows, and yellow poplar were used to evaluate the effects of 5 treatments such as SCBLF (slurry composting and biofiltration liquid fertilizer), general slurry liquid fertilizer, chemical fertilizer, groundwater, and control (no treatment) on vitality, growth performance, and biomass production. Five cuttings for each tree species were planted in 3 replications. After planting cuttings, a coppice was induced by cutting off stems at 10cm above the ground. Data were collected for first growing season and trees were harvested at the end of October. Maximum mortality rate i.e. 96% was recorded in the cuttings treated with groundwater and minimum 92% with control (no treatment). In all tree species, sprouting of stump was not differ significantly among the treatments. Total nitrogen concentrations of leaves and stump sprouts were higher in the treatment of SCBLF than the control, 26.6% and 22.9%, respectively. Biomass production was highest in the stumps treated with chemical fertilizer, $1.98Mg\;ha^{-1}\;year^{-1}$, and lowest in control ($1.34Mg\;ha^{-1}\;year^{-1}$).