• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.667-668
• /
• 2013

• 터널과지하공간
• /
• 제8권2호
• /
• pp.139-145
• /
• 1998

The reliable estimation of the system parameters and the accurate prediction of the system behavior are important to design underground structures safely and economically. Especially, the elastic modulus and the in-situ stresses are very important parameters in predicting the behavior of the underground structure. Therefore, the back analysis using the field measurement data is developed to determine accurately the elastic modulus and the in-situ stresses of the underground structural system in this study. A back analysis using the combined finite and boundary element is developed. It can consider the far field boundary condition and is efficient in computation. In this study, a back analysis is performed to predict behaviors of underground structures for the real construction site. The comparison between the results of the back analysis with field measurement data and the obtained material properties from the field test shows good agreement for the real construction site.

• 한국콘텐츠학회논문지
• /
• 제4권2호
• /
• pp.28-35
• /
• 2004

안테나 복사 특성을 효율적으로 측정할 수 있는 근역장측정 방법의 개선을 논한다. 본 논문에서 직각좌표계에 바탕을 둔 원통주사법의 공식을 제안한다. 제안된 원통주사법 알고리즘을 미소 쌍극자 안테나의 정확한 해와 비교한다. 본 논문의 접근법이 대부분의 안테나 측정에 효과적임을 수치해석 결과에서 알 수 있다.

• 화약ㆍ발파
• /
• 제29권2호
• /
• pp.32-42
• /
• 2011

발파진동의 해석영역은 크게 두 가지 영역으로 구분될 수 있다. 첫째는, 대상 지장물에 대한 영향을 평가할 목적으로 시행되는 원거리 진동분석과, 둘째는, 암반의 손상 및 근거리 지중 구조물에 대한 영향을 평가할 목적으로 시행되는 근거리 지중진동 분석이 있다. 전자의 분석방법은 현재 국내외에서 보편적으로 활용되는 방법이며, 후자의 경우는 대체적으로 Holmberg모델을 사용하여 분석이 이루어져 왔고, 이 모델에 의해 제안된 방법은 기본적인 자료를 원거리 지표 진동 측정 데이터를 활용하는 방법을 근간으로 하여 분석이 이루어진다. 그러나, 최근 십수년동안 수행된 근거리 지중진동 실계측 결과에 따르면 Holmberg모델의 보완에 대한 필요성이 대두되었으며, 국내에서도 처음 시도되어 그 방향성을 제시하고자 하였으나 계측하는 방법에만 한정되었을 뿐 적정한 해석 모델 및 예측방법을 제시하지는 못했다. 따라서, 본 연구에서는 근거리 지중진동의 실계측을 통해 그 결과를 근간으로 하여 적정한 해석모델 및 예측방법을 제시하고자 하였다.

• 한국농공학회지
• /
• 제41권1호
• /
• pp.86-96
• /
• 1999

Laboratory experiment was performed for the TDR to measure the soil moisture, and the results, were compared with the design water content and the one measured by oven-try method. Sand and kaolinite were used . Varaiables for the experiment were water content (10-50%), void ration (0.7 -1.3), mixture rate of kaolinite (10-30%), and measurement methods (TDR and oven-dry). In all cases , TDR method showed very accurage and reliable results , and average error and error range were far lews than the oven-dry method which is widely used. Considerable error was noticed when water contnet was 50% where saturation was achieved for both methods. Therefore, TDR was thought to be applicable to the field moisture measurement if it is unsaturated. For field scale application of TDR, more research and verification of the accuracy with diverse soil conditions including physical ,chemical and mineral properties are recommended.

• 한국연초학회지
• /
• 제17권1호
• /
• pp.79-97
• /
• 1995

On the basis of the literature, which is at present still scientific information improvable, the results of research done so far into the occurrence and analytical methodology of major markers of environmental tobacco smoke(ETS) have been summarized. Key areas addressed are: differences in physicochemical composition between mainstream smoke, sidestream smoke and ETS: techniques for field measurement of ETS: relationship between indoor air quality with ETS and its distribution view of US EPA and its problems: biological effects and concerning estimation of ETS exposure.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.65-74
• /
• 2004

Measurement of concentration distributions of suspended particles in a micro-channel is out of the most crucial necessities in the area of Lab-on-a-chip to be used for various bio-chemical applications. One most feasible way to measure the concentration field in the micro-channel is using micro-LIF(Laser Induced Fluorescence) method. However, an accurate concentration field at a given cross plane in a micro-channel has not been successfully achieved so far due to various limitations in the light illumination and fluorescence signal detection. The present study demonstrates a novel method to provide an ultra thin laser sheet beam having five(5) microns thickness by use of a micro focus laser line generator. The laser sheet beam illuminates an exact plane of concentration measurement field to increase the signal to noise ratio and considerably reduce the depth uncertainty. Nile Blue A was used as fluorescent dye for the present LIF measurement. The enhancement of the fluorescent intensity signals was performed by a solvent mixture of water $(95\%)$ and ethanol (EtOH)/methanol (MeOH) $(5\%)$ mixture. To reduce the rms errors resulted from the CCD electronic noise and other sources, an expansion of grid size was attempted from $1\times1\;to\;3\times3\;or\;5\times5$ pixel data windows and the pertinent signal-to-noise level has been noticeably increased accordingly.

• 한국지반공학회논문집
• /
• 제33권11호
• /
• pp.21-34
• /
• 2017

지하투과레이더 신호는 같은 대상지반에 대하여 탐사를 수행하더라도 안테나의 지향성에 따라 신호의 진폭이 다르게 측정될 수 있으므로 이상구간 평가 시 안테나의 지향성을 고려하여야 한다. 본 논문의 목적은 전자기파의 반사특성분석을 통하여 안테나의 지향성을 조사하고, 지향성에 따른 이상구간의 검측이 가능한 각도의 유효범위를 평가하는 것이다. 지향성 측정을 위하여 원형의 금속봉을 반사체로 설정하고 전자기파의 E-평면(E-plane)과 H-평면(H-plane)에 대하여 안테나와 이루는 각도와 거리를 조절하며 반사파를 측정하였다. 측정된 반사파의 분석을 통하여 안테나에 대한 영역의 경계를 설정하였으며, 근거리장 및 원거리장 영역에서 각각 서로 거리가 다른 두 지점을 설정하여 근거리장 및 원거리장 영역에서의 방사 패턴을 조사하였다. 방사 패턴 측정 결과, 근거리장에서는 E-평면 및 H-평면 모두 최소 $50^{\circ}$ 이상의 구간에서 부엽이 나타나 주엽 방향 및 부엽 방향에 대하여 지향성을 보인 반면, 원거리장에서는 주엽 방향에 대해서만 지향성을 보였다. 근거리장 영역에서는 반사파의 진폭이 변동을 보이긴 하나 반사파와 잡음의 구분이 가능하여 분석의 신뢰도가 높은 반면 원거리장 영역에서는 반사파의 진폭은 안정된 모습을 보였으나 전자기파손실이 크기 때문에 반사파와 잡음의 구분이 어려워 분석의 신뢰도가 낮을 것으로 판단되었다. 본 연구에서 수행된 근거리장과 원거리장에서의 지향성 평가는 도심지와 같이 임의의 위치 및 깊이에 존재할 수 있는 이상구간 평가시 신뢰도 향상에 활용될 수 있음을 보여준다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.86-89
• /
• 2004

One most feasible way to measure the concentration field in the micro-channel is using micro-LIF(Laser Induced Fluorescence) method. However, an accurate concentration field at a given cross plane in a micro-channel has not been successfully achieved so far due to various limitations in the light illumination and fluorescence signal detection. The present study demonstrates a novel method to provide an ultra thin laser sheet beam having five(5) microns thickness by use of a micro focus laser line generator. The laser sheet beam illuminates an exact plane of concentration measurement field to increase the signal to noise ratio and considerably reduce the depth uncertainty. Nile Blue A was used as fluorescent dye for the present LIF measurement. The enhancement of the fluorescent intensity signals was performed by a solvent mixture of water $(95\%)$ and ethanol (EtOH)/methanol (MeOH) $(5\%)$ mixture. To reduce the rms errors resulted from the CCD electronic noise and other sources, an expansion of grid size was attempted from $1\times1$ to 3(3 or 5(5 pixel data windows and the pertinent signal-to-noise level has been noticeably increased accordingly.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.