• Earthquakes and Structures
• /
• v.15 no.5
• /
• pp.529-540
• /
• 2018

The influences of initial damage paths and aftershock (AS) spectral shape on the assessment of AS collapse fragility are investigated. To do this, a four-story ductile reinforced concrete (RC) frame structure is employed as the study case. The far-field earthquake records recommended by FEMA P695 are used as AS ground motions. The AS incremental dynamic analyses are performed for the damaged structure. To examine the effect of initial damage paths, a total of six kinds of initial damage paths are adopted to simulate different initial damage states of the structure by pushover analysis and dynamic analysis. For the pushover-based initial damage paths, the structure is "pushed" using either uniform or triangle lateral load pattern to a specified damage state quantified by the maximum inter-story drift ratio. Among the dynamic initial damage paths, one single mainshock ground motion or a suite of mainshock ground motions are used in the incremental dynamic analyses to generate a specified initial damage state to the structure. The results show that the structure collapse capacity is reduced as the increase of initial damage, and the initial damage paths show a significant effect on the calculated collapse capacities of the damaged structure (especially at severe damage states). To account for the effect of AS spectral shape, the AS collapse fragility can be adjusted at different target values of ${\varepsilon}$ by using the linear correlation model between the collapse capacity (in term of spectral intensity) and the AS ${\varepsilon}$ values, and coefficients of this linear model is found to be associated with the initial damage states.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.186-194
• /
• 2007

This study was performed to compare the load-carrying capacities of the reinforced concrete structure between the carbon fiber adhesion reinforcement method and the external post-tensioning method and further estimate the effective stress of the reinforced material by analyzing the experimental reinforcing effect of each method and the behavior resulting from each method. As a result, it was found out that the effective stress of the carbon fiber reinforcement according to the carbon fiber adhesion reinforcement method had an unexpected value, and also, bearing of the stress was found to be far from sharing thereof. That is to say, while the carbon fiber was bearing the whole stress to some limits, it got to be momentarily ruptured as soon as it went beyond such limits. On the other hand, the external post-tensioning method has the advantage of inducing an initial effective stress by introducing a strain, and thus, it was found that behavior or bearing of the stress was also found to be a solid behavior of the steel wire. This method was also found to be more efficient and excellent than the carbon fiber adhesion reinforcement method in the reinforcing effect or securing the effective stress. Accordingly, we were to discuss the effective stress as comparatively examined, focusing on deriving of the more enhanced reinforcing effect on the basis of the experiment to which the field characteristic is added.

• English Language & Literature Teaching
• /
• v.8 no.1
• /
• pp.165-198
• /
• 2002

The purpose of this research is to improve the writing ability of students by an ideal test model of English writing based on strategies of procedural learning stages enhancing the level of students' writing ability. Assessment of writing in the field of English education has been limited so far to very restricted areas with no appropriate scientific scrutiny. Assessment is really meaningful only when it exactly estimates the ability of students. Since English writing competence has become indispensable in this era of global village, writing instruction should be most emphasized. The most forceful method of busting writing instruction is to utilize the so-called washback effect of testing. So, to develop a good test model of writing, the first thing that is required is to inspect writing strategy in steps and, then, testing itself. First of all, analyzed with a special reference to the 6th high school English curriculum were the goals and contents of the syllabus reflected in one kind of junior high textbook and eight different kinds of senior high textbooks. Then questionnaires on the whole area of writing and tendencies of English writing classes were given to 100 English teachers, 300 students. The results of questionnaires were statistically analyzed. Then, some suggestions and opinions about the questioning method were made: the procedural strategy in steps, English writing instruction and test model of assessment were applied to the syllabus referring to teaching plans. On the bases of the results of the questionnaires, three pretests and a final test of English writing were administered to verify the effect of enhanced English writing competence which had been gradually promoted and, through the promotion, produced the test criteria of English writing. In conclusion, guidance and evaluation of English writing through in steps are really indispensable to increase student's practical ability and, accordingly, we are in need of the development of a testing method of useful writing practiced in school class above anything else. So, it is necessary to further the study on methods to assess writing ability on the bases of participation and fluency of students with their keen interest in English. Also, to intensify the effect of the test model, more accommodating reorganization of syllabus is required in our education. For instance, we need a flexible operation in organizing time units from the current 50 minutes to 100-130 minutes.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.67-87
• /
• 2023

Many online shopping sites now offer personalized recommendation systems to improve consumers' shopping experiences by lowering costs (time, cost, etc.), catering to consumers' tastes, and stimulating consumers' potential shopping needs. So far, domestic and foreign research on the personalized recommendation system has mainly focused on the field of computer science, which is advantageous for obtaining accurate personalized recommendation results for users but difficult to continuously track the users' psychological states or behavioral intentions. This study attempted to investigate the effect of the characteristics of the personalized recommendation system in the online shopping environment on consumer perception and purchase intention for consumers using the Stimulus-Organism-Response (S-O-R) model. The analysis results adopted all hypotheses on the effect of the quality of the personalized recommendation system and information quality on trust and perceived value. Through the empirical results of this study, the factors influencing consumers' use of personalized recommendation system can be identified. In order to increase more purchase, online shopping companies need to understand consumers' tastes and improve the quality of the personalized system by improving the recommendation algorithm thus to provide more information about products.

• Journal of Ecology and Environment
• /
• v.48 no.1
• /
• pp.85-95
• /
• 2024

Background: In Korea, riparian zones and some floodplains have been converted into agricultural fields and urban areas. However, there are essential for maintaining biodiversity, as they are important ecological spaces. There are also very important spaces for humanity, as they perform various ecosystem services in a changing environment including climate change. Due to the importance of rivers, river restoration projects have been promoted for a long time, but their achievement has been insignificant. Development should be pursued by thoroughly evaluating the success of the restoration project. Ecological restoration is to accelerate succession, a process that a disturbed ecosystem recovers itself, with human assistance. Ecological restoration can be a test bed for testing ecological theories in the field. In this respect, ecological restoration should go beyond a 'simple landscaping exercise' and apply ecological models and theories in restoration practice. Results: The cross-section of the restored stream is far from natural rivers due to its steep slope and artificial material. The vegetation profiles of the restored streams did not reflect the flooding regime of the river. The species composition of the vegetation in the restored stream showed a significant difference from that of the reference stream, and was also different from that of an unrestored urban stream. Although species richness was high and the proportion of exotic species was low in the restored stream, the effect was offset by the high proportion of gardening and landscaping plants or obligate terrestrial plants. Conclusions: Based on both the morphological and ecological characteristics of the river, the restoration effect in the restored stream was evaluated to be very low. In order to solve the problems, a systematic adaptive management plan is urgently required. Furthermore, it is necessary to institutionalize the evaluation of restoration effects for the development of river restoration projects in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.235-244
• /
• 2014

This paper describes the subarray channel configuration and calibration method for airborne AESA radar antenna. AESA radar demonstrator was designed and implemented for the digital beam-forming performance test of the 12 channel subarray structure. Magnitude and phase difference can be exist between the manufactured subarray channel. In this paper, calibration method for the subarray difference error was suggested. We measured digital monopulse slope in the subarray channel and verified the channel calibration effect. To verify the subarray channel operation, digital monopulse channel was compared with analog monopulse channel performance. AESA radar demonstrator was tested in the ground far field test range. Emulated single target was generated to test the detection and tracking performance of the demonstrator with the same waveform and search pattern. We verified that the detection and tracking performance of the 12 subarray digital monopulse channel was similar with the conventional analog monopulse channel. Also, ABF(Adaptive Beam-Forming) function for the sidelobe jammer was tested and effective operation was verified.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.281-288
• /
• 2006

Recent increase in the number of pixels of a non-metric digital camera encourages to use it for close-range photogrammetry such as modeling cultural asset and buildings. However, these cameras have to be calibrated far close-range photogrammetry application. For self-calibration, an appropriate pbotograrnmetric network and object field should be designed. In this paper, we studied the effect on self-calibration accuracy changes according to the change of the number of ground control points, dimensions of the ground control points, and the combination of images. We concluded that self-calibration with three photos including a vertical photo can give the stable accuracy of interior orientation parameters and 10 ground control points on a plane can give high accuracy for object reconstruction.

• Journal of the Korea Computer Graphics Society
• /
• v.4 no.1
• /
• pp.79-88
• /
• 1998

Till now there are several rendering models for water and simulating other fluids and their dynamics. Especially in order to generate a curved surface of flexible objects such as liquid and snow, the implicit metaball formulation is widely used in favor of its simplicity and flexibility. This paper proposes one excellent method for generating water droplets, which would be deformed in gravitation field. In previous works, a water droplet was simply represented by approximated curved surfaces of a symmetric metaball. Thus the final result of the rendered water droplet was far from a realistic droplet, because they do not consider the gravitational effect in droplets. We propose a new metaball model for rendering water droplets placed on an arbitrary surface considering the gravitation and friction between droplet and plate. Our new metaball model uses a new vector field isosurface function to control the basic scalar metaball with respect to the norm of gravitational force. In several experiments, we could render a photo-realistic water droplets with natural-looking shadows by applying ray-tracing.

• Structural Engineering and Mechanics
• /
• v.13 no.6
• /
• pp.615-638
• /
• 2002

This paper presents a method of seismic analysis for a cylindrical liquid storage structure considering the effects of the interior fluid and exterior soil medium in the frequency domain. The horizontal and rocking motions of the structure are included in this study. The fluid motion is expressed in terms of analytical velocity potential functions, which can be obtained by solving the boundary value problem including the deformed configuration of the structure as well as the sloshing behavior of the fluid. The effect of the fluid is included in the equation of motion as the impulsive added mass and the frequency-dependent convective added mass along the nodes on the wetted boundary of the structure. The structure and the near-field soil medium are represented using the axisymmetric finite elements, while the far-field soil is modeled using dynamic infinite elements. The present method can be applied to the structure embedded in ground as well as on ground, since it models both the soil medium and the structure directly. For the purpose of verification, earthquake response analyses are performed on several cases of liquid tanks on a rigid ground and on a homogeneous elastic half-space. Comparison of the present results with those by other methods shows good agreement. Finally, an application example of a reinforced concrete tank on a horizontally layered soil with a rigid bedrock is presented to demonstrate the importance of the soil-structure interaction effects in the seismic analysis for large liquid storage tanks.

• Journal of Sensor Science and Technology
• /
• v.29 no.1
• /
• pp.59-62
• /
• 2020

Currently, increasing attention is being paid to relaxor-based ferroelectric single crystals in photoacoustic images, especially for high-end applications. Among the crystals are (1-x)Pb(Mg_1/3Nb_2/3)O₃-xPbTiO₃ (PMN-100xPT) single crystals located near their morphotropic phase boundary (x = 0.30-0.35) because of their ultrahigh piezoelectric and electromechanical coupling properties. The alternating current poling (ACP) treatment, rather than the conventional direct current poling treatment, has recently been spotlighted due to its effectiveness in enhancing the piezoelectric properties. So far, it has been suggested that the enhanced piezoelectricity originates from either a domain miniaturization to nanodomains or from an electric-field-induced monoclinic symmetry. In this study, we demonstrate by thermally stimulated depolarization current measurements that the effect of ACP is too complex to be explained using a single mechanism and that the proposed electric-field-induced monoclinic symmetry is unlikely to exist.