• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.109-115
• /
• 2011

Drying characteristics of squids under two dry conditions were investigated using far infrared and heated air. Dry temperatures of 40, 50 and $60^{\circ}C$ with air speed of 0.6, 0.8 and 1.2 m/s were used for evaluating far infrared squid drying. Heated air squid drying at 40 and $50^{\circ}C$ with air speed of 0.8 m/s was used as a control treatment. The two drying were evaluated in terms of drying rate, color, TBA value, aerobic bacteria, cutting shear, penetration strength, and energy consumption. The drying rate of far infrared drying was relatively faster than that of heated air drying. The drying time of far infrared drying was reduced as the drying temperature increased. The color difference of far infrared dried squids was from 18.81 to 22.85, and heated air dried squid had the color different from 23.94 to 24.09. Far infrared dried squid had relatively smaller TBA values that indicate a level of rancidity. The aerobic bacteria of heated air dried squid increased from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g before and after drying, respectively. Far infrared dried squid had relatively smaller increase (from $970{\times}10^3$ to $40,000{\times}10^3$ CFU/g). The cutting shear and penetration strength for far infrared dried squids was relatively lower. In addition, far infrared squid drying consumed relatively less energy compared to heated air drying.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.35 no.1
• /
• pp.45-50
• /
• 2017

Using the relatively low-cost, far-infrared dryer inhibiting the destruction of a variety of physiologically active components of the mulberry fruit, we have studied to make semidry mulberry fruit that can be kept at room temperature for a long time. By adjusting the temperature of the far-infrared dryer step-by-step, we developed a semi-dry method of maintaining the shape of the mulberry fruit. In addition, by drying the coating of honey after removing the juice generated by the mulberry fruit thawing process improved the acceptability of the taste of fruit. We conducted heat treatment mulberry fruit into a $95^{\circ}C$ infrared dryer 5 hours to thaw the frozen mulberry fruit. After 10 to 20% of honey coating, the primary drying ($95^{\circ}C$, 5 hours) was implemented. then, the secondary drying was conducted after controlling the temperature of the far infrared dryer $60^{\circ}C$, for 10 hours. These manufacture process was able to obtain semi-dried mulberry fruit. Dry weight ratio and moisture content were around 25%, and around 16% level respectively. It was to enable long-term storage at room temperature. Therefore, it is suggested that the method of using the far-infrared drying machine to manufacture semi-dried mulberry fruit can be a way to improve the farm income if applied to the farm.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.43-50
• /
• 2016

Purpose: The present study is aimed at examining the drying characteristics of sea tangle through a combination of microwave and far-infrared drying experiment and finding the optimal drying conditions. Methods: Sea tangle was cleaned and cut into fine pieces (5mm) before they were subjected to combinational drying by microwave and far-infrared ray. The amount of specimen per drying is 2 kg. The finely cut pieces of sea tangle were preheated in a microwave dryer for three different lengths of time (10, 15, and 20 min). Subsequently, they were dried using a far-infrared dryer at tow temperatures ($90^{\circ}C$ and $100^{\circ}C$) at an air velocity of 0.8 m/s until the final moisture content reduced to 10%. Results: Sea tangle dried under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Of the drying models verified in this study, the logarithmic model showed high accuracy with the coefficient of determination $R^2>0.7825$ and RMSE<0.1095. The rehydration ratio of sea tangle was the highest (12.87 g water/g dry matter) under the condition of 15 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. The energy consumption for the combination of microwave and far-infrared drying was the lowest (4.78 kJ/kg water) under the condition of 20 min of preheating in the microwave dryer and drying at $100^{\circ}C$ by the far-infrared dryer. Conclusions: Considering the drying time, discoloration during drying, rehydration ratio, and energy consumption for the drying of sea tangle, the optimal drying conditions for high-quality sea tangle are 15 min of preheating in a microwave dryer and drying at $100^{\circ}C$ by a far-infrared dryer.

• Food Science and Preservation
• /
• v.3 no.2
• /
• pp.137-143
• /
• 1996

In order to produce the high-quality of dried red pepper with respect to a color and a taste we developed a automatic drier equipped with combined several heat energies(ADCHE). and compared the quality of ADCHE-treated red pepper with that of the pepper treated with conventional dryings such as natural, hot-air, and far-infrared ray dryings. The results obtained were as follows : (1) The contents of capsanthin varied significantly with drying methods within the range of 1.7 to 6. 4mg/g dry weight. The capsanthin level of red pepper treated with far-infrared ray drying was higher than that of the pepper treated with ADCHE showed the highest at 51.46mg/g dry weight of three drying methods. (2) As a result of determination of color intensity of-red-pepper using-a colorimeter, the red color intensity of the peppers was affected by drying methods irrespective of drying temperature, and especially a value of red pepper treated with ADCHE was appeared to be 19. 1, indicated that this pepper have the most bright color intensity. (3) The contents of soluble browing subatances increased with a increase in drying temperature, but L* value of red pepper treated with ADCHE was appeared to be 0.187, indicated that this red pepper have the most clear red color (4) The changes of capsanthin level of red pepper according to drying methodes did not show significantly, but generally a decreasing rate of capsanthin levels were lower in that order ADCHE

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.61-66
• /
• 2015

Purpose: The purpose of this study was to establish conditions to dry a radish by examining the drying and quality characteristics depending on the air temperature and velocity of a far infrared conveyor dryer. Methods: A sample of weighing 6 kg was dried until the moisture content reached $15{\pm}0.5%$ (w.b.). Four temperatures (50, 60, 70, and $80^{\circ}C$) and three air velocity levels (0.4, 0.6, and 0.8 m/s) were employed as the drying factors. Results: The drying rate increased with the increase in the temperature and air velocity but decreased with time. However, the drying rate was influenced by temperature rather than velocity. At a temperature $50^{\circ}C$ with a air velocity of 0.4 m/s, it took 350 min for the radish to dry which was the longest drying time; $80^{\circ}C$ with a air velocity of 0.8m/s, it took 180 min for the radish to dry, which was the shortest drying time. ${\Delta}E$ (the color difference value) increased with the increase in temperature and air velocity. The browning and rehydration ratio increased as the temperature rose. Energy consumption decreased with the increased temperature and air velocity. Conclusions: Based on the results of this study, the best drying conditions for the radish were determined to be a temperature of $70^{\circ}C$ with an air velocity of 0.8 m/s.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.5
• /
• pp.440-450
• /
• 2009

In case of wood flooring, the high emissivity would be one of the most important properties especially as the cover material of underfloor heating system. The FIR (Far Infrared) materials such as wood emit FIR energy by heating, which has been used as the medical therapy such as dry sauna. This research investigated the emissivity and the emission power of wood composites by comparing the amount of the three heat transfer modes transferred by infrared radiation which came from the increased temperature of the bottom board of the plywood box by the heater. The results showed the value of radiation mode was the highest mode for the plywood box, and the convection mode was the main mode for the aluminum box. The rate of convection was 81.8% in the aluminum box and 48.2% in the plywood box, respectively. In case of the rate of radiation, the aluminum box showed only 15.4% and the plywood box showed 51%. The emissivity and the emission power of birch plywood showed the same values as those of wood. The amount of energy required for the temperature rising of water within vial in the aluminum box and in the plywood box were 3.32 kJ and 6.70 kJ respectively, which showed that the vial temperature of the plywood box was two times higher than that of the aluminum box.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.42 no.4
• /
• pp.258-263
• /
• 2022

This experiment was conducted to confirm the possibility of manufacturing artificial Italian ryegrass hay using far-infrared rays in Korea. The machine used in this experiment was a far-infrared ray dryer capable of adjusting temperature, airflow, and far-infrared radiation, and was conducted on Italian ryegrass harvested in May. Conditions for drying were performed by selecting a total of nine conditions, and each condition was set to emission rate of 42 to 45%, and the internal temperature was set to 65℃. The speed of the air flow in the machine was 40-60 m/s, and the overall drying time was 30 minutes for 42% radiation, 25 minutes for 43% radiation, and 20 minutes for 45% radiation. The final dry matter content according to each drying condition was 88.5% on average, and the dry matter content suitable for hay was shown in the all treatment. Looking at the power consumption according to the drying conditions, the lowest was found in the treatment that dried for 20 minutes at 45% radiation. In the drying rate, there was no difference in drying conditions 1 to 5, but a significantly low tendency was shown in conditions 6 to 7. In terms of feed value, CP and IVDMD were higher than raw materials in most drying conditions, and ADF and NDF contents were low, and tended to be high in drying conditions 4, 7, and 8. Through the above results, it was judged that drying conditions 7 and 8 were the most advantageous when considering drying speed, power consumption, and quality.

• Fashion & Textile Research Journal
• /
• v.8 no.1
• /
• pp.129-133
• /
• 2006

To develope a high value-added fiber products which is useful in the human body physiology, the Macban stone was deposited on the PET fabric by sputtering and its effects were investigated. Then, a Macban stone target was prepared for sputtering treatment and treated on the PET fabric by RF sputtering process. After treatment, surface observation by SEM, far-infrared emissivity and emissive power, the fastness to washing and light, bacteriostatic rate, electrostatic, drape stiffness, and breaking strength of PET fabric were investigated. From these investigation, the following conclusions were obtained. 1) The Macban stone was able to deposit on the PET fabric, by the RF sputtering treatment which is eco-friendly dry textile finishing. 2) The far-infrared emissivity and emissive power of sputtered PET fabrics were increased. 3) When PET fabric was treated by sputtering with Macban stone, the amount of deposited Macban stone increased with increasing treatment time and it was deposited on the fabric surface firmly. 4) The bacteriostatic rate of sputtered PET fabrics was about 20%. 5) The electrostatic charge of fiber surface was reduced by sputtering. 6) The fastness washing to light of dyed fabric were improved by the deposition of Macban stone, but the breaking strength was not changed by sputtering. 7) The drape stiffness of sputtered PET fabrics increased with increasing treatment time.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.4
• /
• pp.266-270
• /
• 2007

This research was conducted to investigate antioxidant activities of Juglans mandshrica forages by the irradiation of far infrared ray during leaf drying processes before compound extraction, with its potential use for activating antioxidants. The contents of total phenolics and flavonoids in the basis of a gram leaf dry weight were maximized in 20 min at 30 V of far infrared irradiation. Total phenolic content was 25.43 mg/g in the FIR treatment, while it was 21.12 mg/g in the non-FIR treatment control. Total flavonoid content was 39.38 mg/g in the FIR treatment, while it was 32.78 mg/g in the non-FIR treatment control. The contents were decreased when the condition of far infrared ray irradiation was higher voltage and longer treatment time, exhibiting 16.93 mg/g of total phenolics and 23.78 mg/g of total flavonoids in 30 min at 50 V of far infrared irradiation. The antioxidant activities were shown to positive relationships with the contents of total phenolics and total flavonoids. In this study, we concluded that content of bioactive molecules relating antioxidant activity in Juglans mandshrica forages is optimized in 20 min at 30 V of far infrared irradiation for leaf drying process.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.5
• /
• pp.354-361
• /
• 2011

In order to product dry goods of Gastrodiae Rhizoma with high quality, tubers were treated with various dry methods such as cutting, drying methods and steaming. In cutting than no cutting, they were shown shorter drying hours and lower drying yield. Drying hours in freeze drying was shorter than those of hot air and far-infrared ray. Total polyphenol content was higher in cutting than no cutting. According to steaming, it was increased in freeze drying but decreased rapidly in the other dry methods. Among all treatments, hot air dry treatment with cutting and no steaming had the highest total polyphenol content. Gastrodin and 4-hydroxybenzyl alcohol contents generally were similar or higher in cutting than no cutting. By steaming, gastrodin content in freeze drying was decreased but 4-hydroxybenzyl alcohol content was increased. But hot-air and infrared ray dry, they were shown opposite results. Gastrodin and 4-hydroxybenzyl alcohol contents showed opposite reaction to each other and were shown various response by dry methods.