• 한국제4기학회:학술대회논문집
• /
• 한국제4기학회 2004년도 하계학술대회
• /
• pp.57-60
• /
• 2004

• 열병합발전
• /
• 통권74호
• /
• pp.12-17
• /
• 2010

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.88-94
• /
• 2009

In this paper, vibration characteristics after applying variable speed control to fans with a rated speed used in a power plant are studied by performing experiments and analyzing finite element models. Then the campbell diagram is presented to verify the reason of the abnormal vibration measured from fan structure during variable operation of Forced Draft Fan & Induced Draft Fan. According to results, it is found that amplitude of acceleration increases abruptly when a 2X harmonic component meets the natural frequency of fan rotor. Therefore it is very important thing that investigate exactly dynamic characteristics for the rotor at variable speed zone before applying variable speed control to a rotor with a rated speed.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.957-968
• /
• 1999

Performance tests of an airfoil fan and measurement of flow fields at the impeller exit are carried out to investigate the effects of the tip clearance between the rotor and inlet casing on the impeller performance. The impeller is twelve bladed of NACA 65-810 airfoils and tested with 3 different size of gap; 1, 2, 4mm. The relative decrease of pressure rising performance of the fan is 15 percent for the design flow rate when the gap size is 1 percent of the impeller diameter. The reduction of performance becomes large as the flow rate increases. The leakage flow through the clearance affects the through flow of the impeller, which results in decrease of the slip factor as well as the impeller efficiency. The data base obtained in the present study can be used for the design and flow analysis of the airfoil fans.

• 소음진동
• /
• 제10권3호
• /
• pp.430-436
• /
• 2000

The cross-flow fans have been widely used to constitute the air moving systems in many air-ventilating and air-conditioning units. The cross-flow fan system has many design parameters which have crucial influence on the performance and the noise characteristics of the units. As a result there are many difficulties in the design stage of the system and the general design guide has not been sufficiently established yet. This study presents the experimental results of the parametric investigation of some chosen design parameters which are directly related to the shape of the stabilizer the profile of the scroll casing and the diffusion angle of the flow exit. The results are expressed in terms of the fan performance and the specific sound pressure level characteristics. Some parameters have been found to have crucial effects on the system performance/noise characteristics and should be considered with care in the design stage.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.50-57
• /
• 2003

In this paper, an automated design and 3-D modeling system of an axial fan and a boss for cooling towers was developed. API and parametric design Provided by a commercial solid-modeler are engaged to automate modeling process. Design data of the boss are assumed to be given by a user with design experiences while the fan from the fan design program using three-dimensional flow analysis. An algorithm avoiding the interferences between fans and a boss is developed. The design data are registered on the database not only to remove duplicate design but also to transfer the data to ERP system.

• 한국전산유체공학회지
• /
• 제7권2호
• /
• pp.33-42
• /
• 2002

Numerical estimation for concentration of mono-carbon oxygen (CO) gas inside an underground parking lot with auxiliary jet fans for enhancement of ventilation is carried out by using a commercial program. Main interest lies on the diagnosis of the present ventilation system including position and selection of auxiliarly fans in addition to main suppliers and exhausts. Details of both flows and concentration of CO gas that is most important component among car exhaust gases are illustrated in this investigation and those are presented for engineering construction of an underground parking pool. Prediction data of computational work is also validated by real measurements of concentration of CO gas.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.116-121
• /
• 2002

Axial fans are widely used in heavy machines due to their ability to produce high flow rate for cooling of engines. At the same time, the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. To calculate the unsteady resultant force over the fan blade in an unsymmetric engine room. Time-Marching Free-Wake Method is used. From the calculations of unsteady force on fan blades, noise signal of an engine cooling fan is calculated by using an acoustic similarity law. Noise optimization is obtained from Neural Network which is constructed based on the calculated flow rate and noise spectrum.

• 대한수학회보
• /
• 제54권1호
• /
• pp.265-276
• /
• 2017

Let K be a fan-like simplicial sphere of dimension n-1 such that its associated complete fan is strongly polytopal, and let v be a vertex of K. Let K(v) be the simplicial wedge complex obtained by applying the simplicial wedge operation to K at v, and let $v_0$ and $v_1$ denote two newly created vertices of K(v). In this paper, we show that there are infinitely many strongly polytopal fans ${\Sigma}$ over such K(v)'s, different from the canonical extensions, whose projected fans ${Proj_v}_i{\Sigma}$ (i = 0, 1) are also strongly polytopal. As a consequence, it can be also shown that there are infinitely many projective toric varieties over such K(v)'s such that toric varieties over the underlying projected complexes $K_{{Proj_v}_i{\Sigma}}$ (i = 0, 1) are also projective.

• International journal of advanced smart convergence
• /
• 제9권3호
• /
• pp.28-35
• /
• 2020

YouTube has been gaining popularity all around the world. A lot of companies have created their own YouTube channels to leverage them in diverse ways; they upload commercial videos, show people user reviews, and conduct promotions with their products. Sports clubs are no exception; they upload diverse videos to gain popularity and to interact with their fans. This study analyzes how the English Premier League (EPL) clubs leverage their YouTube channel as soccer (football in European nations) players. YouTube activities of 20 clubs during the 2019/2020 Season are investigated. After careful consideration, we decide to examine two factors of the respective channel of the YouTube: 1) Popularity (the number of views and subscribers) 2) Contents of videos (e.g. interviews and highlight scenes). The study followingly inspects the benefits of utilizing YouTube channels and of direct communication between sports clubs and fans in online settings.