• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.337-345
• /
• 2009

The dependence of numerous systems on electronic devices is causing rapidly increasing concern over fault tolerance because of safety issues of safety critical system. As an example, a vehicle with electronics-controlled system such as x-by-wire systems, which are replacing rigid mechanical components with dynamically configurable electronic elements, should be fault￢tolerant because a devastating failure could arise without warning. Fault-tolerant systems have been studied in detail, mainly in the field of aeronautics. As an alternative to solve these problems, this paper presents the fuzzy hybrid redundancy system that can remove most erroneous faults with fuzzy fault detection algorithm. In addition, several numerical simulation results are given where the fuzzy hybrid redundancy outperforms with general voting method.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.34-42
• /
• 2006

As many systems depend on electronics, concern for fault tolerance is growing rapidly. For example, a car with its steering controlled by electronics and no mechanical linkage from steering wheel to front tires(steer-by-wire) should be fault tolerant because a failure can come without any warning and its effect is devastating. In order to make system fault tolerant, there has been a body of research mainly from aerospace field. This paper presents the structure of predictive smoothing voter that can filter out most erroneous values and noise. In addition, several numerical simulation results are given where the predictive smoothing voter outperforms well-known average and median voters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 정보화시공 학술발표회
• /
• pp.19-27
• /
• 2001

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.322-325
• /
• 2006

This study was conducted to develop the crack location technique for CFRP reinforced concrete beam using AE method. To experimentally prove the crack source location made of four reinforced concrete beams strengthened in shear with CFRP. The results compared the real cracking location with the source location has perceived by AE monitoring, before it is appeared the primary crack by visual observation. So, This study used by a basic data in constructing the system of the failure warning at application.

• 지구물리
• /
• 제8권3호
• /
• pp.137-143
• /
• 2005

Early detection of premonitory symptom of slope movement ensures tremendous saving of lives and repair costs from catastrophic disaster. Therefore, it is essential to constantly monitor the performance and integrity of both reinforced and un-reinforced cut slopes. We developed a novel monitoring system by using tension wire sensors. It's advantages are highly sensitivity, simple installation, large displacement measurement, durability of system, capability of remote sensing. Real-time measurement of slope surface movement is shown graphically and it gives a warning when the monitored value exceeds a given threshold level so that any sign of abnormal slope movement can be easily perceived.

• 품질경영학회지
• /
• 제22권4호
• /
• pp.40-58
• /
• 1994

Some systems such as early warning system should be inspected occasionally in order to detect failures. If the system is inspected too frequently, inspection cost increases. On the other hand, if the number of inspections is reduced too much, the undetected system downtime cost increases. Thus, it is of interest to find effective inspection schedule, which minimizes the sum of inspection and downtime costs. When the system has increasing failure rate, inspection intervals get shorter as time goes on. But a common practice is to inspect the system at predetermined periodic intervals. In this paper, periodic inspection policy and a modified periodic inspection policy are considered. The modified policy is easily applicable and cost-effective. Some numerical examples are included in order to explain the modified inspection ploicy and its cost performance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.193-198
• /
• 2001

The feasibility of the acoustic emission technique in predicting the residual fatigue life of STS304 stainless steel is presented. Acoustic emission was continuously monitored during the fatigue tests. Considerable acoustic emission occurred during the first few cycles. Acoustic Emission increased rapidly at about 90% of the fatigue life, clear and ample warning of impending fatigue failure was observed. Fatigue damage accumulation was evaluated in terms of an AE cumulative counts. The AE cumulative counts may be taken as an indicator of fatigue cumulative damage. Fatigue damages corresponding to 20, 40, 60 and 80% of the total life were induced at a cyclic stress amplitude. The specimens with and without fatigue damage were subjected to tensile tests. In tensile tests, the total cumulative counts were reduced with increasing fatigue damage. It was observed that the residual tensile strength of material did not change significantly with prior cyclic loading damages.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.126-134
• /
• 2008

As many systems depend on electronics, concern for fault tolerance is growing rapidly. For example, a car with its steering controlled by electronics and no mechanical linkage from steering wheel to front tires (steer-by-wire) should be fault tolerant because a failure can come without any warning and its effect is devastating. In order to make system fault tolerant, there has been a body of research mainly from aerospace field. This paper presents the structure of predictive hybrid redundancy that can remove most erroneous values. In addition, several numerical simulation results are given where the predictive hybrid redundancy outperforms wellknown average and median voters.

• 한국철도학회논문집
• /
• 제12권6호
• /
• pp.1037-1042
• /
• 2009

국내 사면안정성 설계기준은 우기 건기시로 제안되어 사용되고 있지만, 한계평형해석의 결과로 산출되는 안전율이 외부조건에 의해 변화되며, 특정한 변곡점이 없기 때문에 사전에 안전을 확보하기 어렵다는 점에 착안하여 경보발령, 서행 및 열차정지 등과 같은 안전규정의 설정이 가능한 대안을 검토하였다. 이를 위하여 본 연구에서는 불포화토질역학과 신뢰성해석에 기초하여 현행 안전율을 보조할 수 있는 부가적인 지표를 도입하였다. 강우침투에 따라 안전율과 신뢰지수는 지수함수형태로 감소하는 특징을 보이며, 파괴확률은 누적확률분포함수 형태로 증가함을 확인할 수 있었다. 본 연구에서 검토한 부가지표인 파괴확률 변화속도는 현재의 기준 안전율 부근에서 명백한 변곡점을 갖는 특징이 있다. 이를 이용하면 사면의 안전관리와 모니터링 시스템에 대한 적정 규정으로 적용이 가능할 것으로 판단된다.

• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.71-78
• /
• 2022

본 연구에서는 사면 붕괴 위험을 사전에 신속히 감지하고 정확한 판단으로 예·경보를 발령할 수 있는 비교적 저렴하고 효율적인 사면 붕괴 예측 시스템을 개발하기 위하여 암반 발파시험을 통한 지중변위센서의 적용성을 고찰하였다. 발파실험에서 발파원과 가까운 곳에 위치한 센서가 발파에 따른 암반 내부 파쇄로 인해 큰 변위값을 나타내고 발파원과 떨어진 곳에 위치한 센서는 비교적 작은 변형량을 나타냈으나 계측기의 위치보다는 암반 불연속면의 분포 양상과 발파로 인한 사면 내부의 암반의 거동이 보다 더 지중변위센서에서 계측되는 변위값에 영향을 미치는 것으로 나타났다. 본 연구를 통해 유선 및 무선 type의 지중변위센서 시스템은 암반사면 거동 계측에 활용 가능한 시스템임을 확인하였으며, 사면 붕괴 예측용 조기경보 시스템 구축에 필요한 기초 자료로서 활용될 수 있을 것으로 사료된다.