• Computers and Concrete
• /
• 제17권5호
• /
• pp.639-653
• /
• 2016

The present article discusses the effect of the ratio of bridge surface to total shear surface, number of bridge areas and normal stress on the failure behavior of the planar non-persistent open joints. Totally, 38 models were prepared using plaster and dimensions of $15cm{\times}15cm{\times}15cm$. The bridge area occupied $45cm^2$, $90cm^2$ and $135cm^2$ out of the shear surface. The number of rock bridges increase in fixed area. Two similar samples were prepared on every variation in the rock bridges and tested for direct shear strength under two high and low normal loads. The results indicated that the failure pattern and the failure mechanism is mostly influenced by the ratio of bridge surface to total shear surface and normal stress so that the tensile failure mode change to shear failure mode by increasing in the value of introduced parameters. Furthermore, the shear strength and shear stiffness are closely related to the ratio of bridge surface to total shear surface, number of bridge areas and normal stress.

• Structural Monitoring and Maintenance
• /
• 제1권1호
• /
• pp.111-130
• /
• 2014

The increased use of carbon fiber reinforced polymer (CFRP) in retrofitting reinforced concrete (RC) members has led to the need to develop non-destructive techniques that can monitor and characterize the unique damage mechanisms exhibited by such structural systems. This paper presented the damage characterization results of six CFRP retrofitted RC beam specimens tested in the laboratory and monitored using acoustic emission (AE). The focus of this study was to continuously monitor the change in AE parameters and analyze them both qualitatively and quantitatively, when brittle failure modes such as debonding occur in these beams. Although deterioration of structural integrity was traceable and can be quantified by monitoring the AE data, individual failure mode characteristics could not be identified due to the complexity of the system failure modes. In all, AE was an effective non-destructive monitoring tool that can trace the failure progression in RC beams retrofitted with CFRP. It would be advantageous to isolate signals originating from the CFRP and concrete, leading to a more clear understanding of the progression of the brittle damage mechanism involved in such a structural system. For practical applications, future studies should focus on spectral analysis of AE data from broadband sensors and automated pattern recognition tools to classify and better correlate AE parameters to failure modes observed.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.211-221
• /
• 2019

To study the eccentric compression behavior of ultra-high performance fiber reinforced concrete (UHPFRC) columns, six UHPFRC columns and one high-strength concrete (HSC) column were tested. Variation parameters include load eccentricity, volume of steel fibers and stirrup ratio. The crack pattern, failure mode, bearing capacity, and deformation of the specimens were studied. The results showed that the UHPFRC columns had different failure modes. The large eccentric compression failure mode was the longitudinal tensile reinforcements yielded and many horizontal cracks appeared in the tension zone. The small eccentric compression failure mode was the longitudinal compressive reinforcements yielded and vertical cracks appeared in the compressive zone. Because of the bridging effect of steel fibers, the number of cracks significantly increased, and the width of cracks decreased. The load-deflection curves of the UHPFRC columns showed gradually descending without sudden dropping, indicating that the specimens had better deformation. The finite element (FE) analysis was performed to stimulate the damage process of the specimens with monotonic loading. The concrete damaged plasticity (CDP) model was adopted to characterize the behaviour of UHPFRC. The contribution of the UHPFRC tensile strength was considered in the bearing capacity, and the theoretical calculation formulas were derived. The theoretical calculation results were consistent with the test results. This research can provide the experimental and theoretical basis for UHPFRC columns in engineering applications.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.59-66
• /
• 2020

축소모형 팔각형 기둥 실험체 2개를 제작하여 일정한 축력 하에서 반복 횡하중을 가력하는 실험을 수행하였다. 실험체는 중실단면과 중공단면이고 모든 실험체의 횡방향 나선철근 체적비는 0.00206의 값을 갖는다. 실험체들은 휨-전단 파괴거동을 보였다. 본 논문에서는 실험결과에 따른 파괴거동과 내진성능을 분석하였다. 실험결과, 중공 실험체는 초기강성, 초기 균열양상, 에너지 소산능력 등의 구조성능이 중실 실험체와 유사한 거동을 보였으나, 중공 실험체의 경우에는 3% 변위비 이후에 횡력, 극한변위, 에너지소산능력이 현저하게 감소되었다.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.566-572
• /
• 2016

소프트웨어 개발과정에서 소프트웨어 신뢰성은 매우 중요한 문제 중에 하나이다. 소프트웨어 고장현상을 분석하기 위하여 비동질적인 포아송과정에서 고장 발생 추이를 의미하는 위험함수가 고장시간에 독립적으로 일정하거나, 종속적인 경우, 즉 비-증가 또는, 비-감소하는 속성을 가질 수 있다. 본 연구에서는 소프트웨어 제품 테스팅 과정에서 고장 수명분포로서 어랑분포의 다양한 형상모수를 고려한 소프트웨어 개발 비용 분석에 대하여 연구되었다. 소프트웨어 고장현상을 분석하기 위하여 모수추정은 최우추정법이 사용되었다. 따라서 본 논문에서는 어랑분포의 형상모수를 고려한 소프트웨어 개발비용모형 분석을 위하여 소프트웨어 고장간격 시간자료를 이용하여 비교 및 평가하였다. 그 결과 형상모수에 따른 비용곡선을 비교 하였을 때 형상모형이 작을수록 비용이 많고 소프트웨어 최적 방출시간이 지연 됨을 알 수 있었다. 이 연구를 통하여 소프트웨어 개발자들에게 소프트웨어 형상모수에 따른 개발 비용을 탐색하는데, 기본적으로 도움을 줄 수 있는 사전정보의 역할을 할 수 있을 것으로 판단된다.

• 동의생리병리학회지
• /
• 제27권2호
• /
• pp.153-166
• /
• 2013

Yang deficiency pattern is a representative syndrome differentiation. This article is a study on to which categories of modern diseases yang deficiency is assigned by reference to modern clinical papers and the meaning of yang deficiency interpreted with a perspective of Korean Medicine and a modern perspective. Yang deficiency, yang qi deficiency, lack of yang qi and yang qi debilitation are the words found in "Nei Ching" and yang qi can be interpreted as something to warm, drive and arouse. Zhangzhongjing considered recovery or loss of Yang as the key to life in "Shanghanlun". Danxi proposed "Yang being liable to hyperactivity, Yin being insufficient" and emphasized pathological ministerial fire of Yang exuberance rather than physiological ministerial fire of Yang deficiency. Zhangjingyue proposed "Yang not being in excess, Yin being often deficient" and understood growth and decline of yin qi are all led by yang qi and put emphasis on true yin in addition to yang qi. Diseases of yang deficiency pattern are related with decline of metabolic level, hypofunction of internal secretion, disorder of immune function, disorder of automatic nerve system, sympathetic nerve inhibition, metabolic disorder of microelements, increase of cGMP, change of microcirculation, low speed of blood stream, kidney malfunction. Diseases related with kidney are sterility, polycystic ovary syndrome, spinal stenosis, edema, renal failure, IgA nephropathy, erectile dysfunction, nephritis, prostatitis, benign prostatic hyperplasia, decrease of adrenal cortical hormone by nephrotic syndrome, myelodysplastic syndrome. Disease related with heart are heart failure, arrhythmia, cardiomyopathy, atherosclerosis heart disease, hypertension, hyperlipidemia, pulmonary heart disease. Diseases related with spleen are irritable bowel syndrome, ulcerative colitis. Diseases related with liver are hypothyroidism, liver cirrhosis ascites, hepatitis B, chronic hepatitis, hepatic diabetes. Diseases related with lung are allergic rhinitis, cough variant asthma, bronchial asthma, pulmonary emphysema. And diabetes mellitus, metabolic syndrome, aplastic anemia, headache, encephalatrophy, Alzheimer's disease are also related with yang deficiency.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.333-342
• /
• 2019

Geological dynamic hazards during coal mining can be caused by the failure of a composite system consisting of roof rock and coal layers, subject to different loading rates due to different advancing velocities in the working face. In this paper, the uniaxial compression test simulations on the composite rock-coal layers were performed using $PFC^{2D}$ software and especially the effects of loading rate on the stress-strain behavior, strength characteristics and crack nucleation, propagation and coalescence in a composite layer were analyzed. In addition, considering the composite layer, the mechanisms for the advanced bore decompression in coal to prevent the geological dynamic hazards at a rapid advancing velocity of working face were explored. The uniaxial compressive strength and peak strain are found to increase with the increase of loading rate. After post-peak point, the stress-strain curve shows a steep stepped drop at a low loading rate, while the stress-strain curve exhibits a slowly progressive decrease at a high loading rate. The cracking mainly occurs within coal, and no apparent cracking is observed for rock. While at a high loading rate, the rock near the bedding plane is damaged by rapid crack propagation in coal. The cracking pattern is not a single shear zone, but exhibits as two simultaneously propagating shear zones in a "X" shape. Following this, the coal breaks into many pieces and the fragment size and number increase with loading rate. Whereas a low loading rate promotes the development of tensile crack, the failure pattern shows a V-shaped hybrid shear and tensile failure. The shear failure becomes dominant with an increasing loading rate. Meanwhile, with the increase of loading rate, the width of the main shear failure zone increases. Moreover, the advanced bore decompression changes the physical property and energy accumulation conditions of the composite layer, which increases the strain energy dissipation, and the occurrence possibility of geological dynamic hazards is reduced at a rapid advancing velocity of working face.

• Clinical and Experimental Pediatrics
• /
• 제50권11호
• /
• pp.1041-1048
• /
• 2007

Not a few patients in children and adolescents are suffering from right ventricular (RV) dysfunction resulting from various conditions such as chronic lung disease, left ventricular dysfunction, pulmonary hypertension, or congenital heart defect. The RV is different from the left ventricle in terms of ventricular morphology, myocardial contractile pattern and special vulnerability to the pressure overload. Right ventricular failure (RVF) can be evaluated in terms of decreased RV contractility, RV volume overload, and/or RV pressure overload. The management for RVF starts from clear understanding of the pathophysiology of RVF. In addition to correction of the underlying disease, management of RVF per se is very important. Meticulous control of volume status, inotropic agents, vasopressors, and pulmonary selective vasodilators are the main tools in the management of RVF. The relative importance of each tool depends on the individual clinical status. Medical assist device and surgery can be considered selectively in case of refractory RVF to optimal medical treatment.

• Earthquakes and Structures
• /
• 제10권2호
• /
• pp.351-366
• /
• 2016

The structural collapse of masonry structure under dynamic loading displays many possible failure mechanisms often related to interaction between structural components. Roof collapse is one of the major damage mechanisms observed in masonry structures during an earthquake. Better connection between the roof diaphragm and walls may be preventing roof collapse, but it can affect other failure mechanisms. In spite of this fact, less attention has been paid to the influence of the roof diaphragm effect on masonry structures and little research has been implemented in this field. In the present study, the roof diaphragm effect on the unreinforced masonry structure under dynamic loading has been experimentally investigated. Three one-quarter scale one-story adobe masonry house models with different roof conditions have been tested by subjecting them to sinusoid loading on a shaking table simulator. Phenomena such as failure pattern, dynamic performance of masonry structure were examined.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1073-1087
• /
• 1993

Many investigations have been carried out concerning tillage tool performance, including energy requirement . Since the performance of tillage could also be evaluated through the change of soil , then it is necessary to investigate the soil cutting process and the pattern of soil failure. This study was conducted using indoor soil bin, STILT (Soil Tillage Tool Interaction) system. The result shows that the soil bin experiments could provide the clear understandings about phenomena of soil failure. The movement of sil , the successive failures was clearly visualized. The relations between the horizontal and vertical forces to the linear motion blade, the shear force on the shear plane which devides soil layer into several segments were indicated by the fluctuation/vibration of the recorded resistance and forces. The results show that the horizontal force(Fx) and vertical force (Fz) develope their frequencies as the change of velocity of blade (10, 20, 40 mm/sec) for each cutting angle (35, 45, 60 degrees). Resultant force of Fx and Fz are much influenced by the cutting angle.