• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4759-4763
• /
• 2014

Radiation therapy in ovarian cancers has been considered an outdated concept for many years, mainly due to its toxicity and failure to show benefit in terms of survival. Chemotherapy has been extensively used after surgery for these cancers and it has almost replaced radiation therapy as an adjuvant treatment. Nevertheless, failures in ovarian cancers continue to occur even with the use of newer and effective chemotherapy regimens. About 70% patients demonstrate recurrence in the abdomen or pelvis after first line chemotherapy in ovarian cancers. With advances in technology and sophistication of radiation techniques, along with the molecular and biological knowledge of distinct histological subtypes, there is a need to redefine the role of radiation therapy. This review article focuses on the literature on use of radiation in ovarian cancers and its rationale and indications in the present day. For this, a literature pub med/medline search was performed from January 1975 to March 2014 to redefine the role of radiotherapy in ovarian cancers.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.193-198
• /
• 2006

Providing stable services has been a crucial factor to determine success or failure in current situations, in which online game industry has become one of the important industries. The study proposed a method of establishing a stable game servers using 'Hearbeat', one of the existing (load) balance server techniques for the enhancement of availability of online game servers. In the proposed method, one could provide users with stable game services, by inspecting master server frequently using stand-by servers corresponding to each game server.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1158-1168
• /
• 1994

The paper proposes a distributed control self-healing algorithm for a line failure to improve the restoration time. This proposed self-healing algorithm acquired the fast restoration time by reducing the number of control messages and the queueing delay. And the reduction of queueing delay was attained by the ASC_NULL(Available Spare Channel_NULL) message which informs neighbor nodes that a source node has no available spare channel to reduce the waste of time during the rerouting. It is difficult for this proposed self-healing algorithm to be compared with other self-healing algorithms, because each self-healing algorithm has different simulation conditions. So, the performance of the proposed self-healing algorithm was compared with only NETRATS(NETwork Restoration Algorithm for Telecommunication Systems). The results of the simulation showed that the proposed self-healing algorithm was better than NETRATS in the restoration time.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.3
• /
• pp.19-24
• /
• 2003

The experimental and simulation study of insulator failure by cement growth on suspended insulators (16,500kgf) for transmission line was discussed. To get more practical and analytic calculation results, the advanced program was used. This analysis tool was possible to calculate stress behaviors with mechanical loading when cement displacement happened. From simulation results, the. cement displacement changed with linear according to temperature. The shear stress was about $7 kgf/mm^2$ at $0.07\%$ displacement provided from $200^{\circ}C$, then it could be seen that the cement would be fractured even if $0.07\%$ displacement acted, because the cement had about $7-9 kgf/mm^2$ flexure strength. The curve patterns of shear stress with the increase of mechanical loading were changed at $0.02\%$ as a turning point, when the cement displacement was over $0.02\%$ the shear stresses decreased reversely with the increase of mechanical loading. From analysis on porcelain body it was known that there were enough margin to protect the fracture of porcelain body before the cement

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.30-33
• /
• 2001

Chemical mechanical polishing(CMP) process has been widely used to planarize dielectrics, which can apply to employed in integrated circuits for sub-micron technology. Despite the increased use of CMP process, it is difficult to accomplish the global planarization of free-defects in inter-level dielectrics (ILD). Especially, defects like micro-scratch lead to severe circuit failure, and affects yield. CMP slurries can contain particles exceeding $1{\mu}m$ size, which could cause micro-scratch on the wafer surface. The large particles in these slurries may be caused by particle agglomeration in slurry supply line. To reduce these defects, slurry filtration method has been recommended in oxide CMP. In this work, we have studied the effects of filtration and the defect trend as a function of polished wafer count using various filters in inter-metal dielectric(IMD)-CMP. The filter installation in CMP polisher could reduce defect after IMD-CMP. As a result of micro-scratches formation, it shows that slurry filter plays an important role in determining consumable pad lifetime.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.41-55
• /
• 2004

This study analyzed snatch technique in weight-lifting performed by female gold, silver, and copper medalists at the 75kg level in the 2002 Pusan Asian Games and obtained the following conclusions. 1. KSH used more extensor in the waist than those in ankles, knees, or hip joints during the second pull, So further training is required to manifest both each of joints and waist extensor effectively and thus for the line from shoulders through barbell to hip joints to form a smooth vertical pattern. 2. Contrary to those in other countries, Korean athlete KSH tended to be swift in starting but slow in the second pull section, showing less effectiveness in movement during the second pull; therefore, they must try to exert a swift movement in lockout. 3. KSH showed slowdown in the speed, which was a factor interfering with performance during second pull, despite the great maximum speed of moving barbell. It is important to use barbell sufficiently not to reduce the speed of vertical movement but rather to keep the speed increasing. 4. KSH, who kept doing inefficient movements such as failure to perform swift lockout after lifting the heel at the maximum angle of lower limbs, needs to reduce this meaningless extension of ankles, knees, or hip joints to exert energy effectively.

• Journal of Welding and Joining
• /
• v.24 no.2
• /
• pp.48-56
• /
• 2006

The fatigue strength of the welds is affected by such factors as the weld geometry, microstructures, tensile properties and residual stresses caused by fabrication. It is very important to evaluate the structural integrity of the welds in nuclear power plant because the weldment undergoes the most of damage and failure mechanisms. In this study, the fatigue assessments for a reactor vessel outlet nozzle with the weldment to the piping system are performed considering the welding residual stresses as well as the effect of local brittle zone in the vicinity of the weld fusion line. The analytical approaches employed are the microstructure and mechanical properties prediction by semi-analytical method, the thermal and stress analysis including the welding residual stress analysis by finite element method, the fatigue life assessment by following the ASME Code rules. The calculated results of cumulative usage factors(CUF) are compared for cases of the elastic and elasto-plastic analysis, and with or without residual stress and local brittle zone effects, respectively. Finally, the fatigue life of reactor vessel outlet nozzle weld is slightly affected by the local brittle zone and welding residual stresses.

• Journal of Chest Surgery
• /
• v.10 no.1
• /
• pp.17-24
• /
• 1977

The present treatment of respiratory failure, using cuffed endotracheal and tracheostomy tube has produced, apparently with increasing frequency, three lesions which have serious ceminical manifestations such as tracheal stenosis, tracheomalasia, and localized tracheal erosion. Extensive resection and reconstruction of the trachea must be necessary because conservative treatment has generally failed in the fully developed stenotic lesion. of the mediastinal trachea following extensive resection is best accomplished by direct anastomosis of the patient`s own tracheobronchial tissue. Any replacement of the mediastinal trachea must be air tight and laterally rigid, and must heal dependably. A variety of materials has been used for substitution following circumferential excision of tracheal segments within the mediastinum. These attempts have often failed because of early leak or late stenosis. We have successfully performed circumferential resection and primary end-to-end anastomosis of the trachea for 4 cases of post-intubation tracheal stenosis located a few centimeter below the tracheostomy stoma in the period of 3 years between 1974 and 1976. The lesion in one patient was found in the upper trachea which was approached anteriorly through a cervicomediastinal incision with division of the upper sternum. Other three located in the lower half of the trachea were operated through a high transthoracic incision with appropriate hilar mobilization in addition to cervical flexion for the development of the cervical trachea into the mediastinum. There were no hospital death, but suture line granulations occurred in two patients were managed by bronchoscopic removal of granulations without difficulties.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.20-33
• /
• 2010

The paper deals with strength design of a riser support installed on floating production storage and offloading (FPSO) vessel under various loading conditions - operation, extreme, damaged, one line failure case (OLFC) and installation. The design problem is formulated such that thickness sizing variables are determined by minimizing the weight of a riser support structure subject to stresses constraints. The initial design model is generated based on an actual FPSO riser support specification. The finite element analysis (FEA) is conducted using MSC/NASTRAN, and optimal solutions are obtained via moving least squares method (MLSM) in the context of response surface based approximate optimization. For the meta-modeling of inequality constraint functions of stresses, a constraint-feasible moving least squares method (CF-MLSM) is used in the present study. The method of CF-MLSM, compared to a conventional MLSM, has been shown to ensure the constraint feasibility in a case where the approximate optimization process is employed. The optimization results present improved design performances under various riser operating conditions.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.8
• /
• pp.872-878
• /
• 2008

Many industrial operations require continuous or nearly-continuous operation of machines, interruption of which can result in significant cost loss. The condition monitoring of these machines has received considerable attentions in recent years. Rapid developments in semiconductor, computing, and communication with a remote site have led to a new generation of sensor called "smart" sensors which are capable of wireless communication with a remote site. The purpose of this research is to develop a new type of smart sensor for on-line condition monitoring. This system is addressed to detect conditions that may lead to equipment failure when it is running. Moreover it will reduce condition monitoring expense using low cost MEMS accelerometer. This system is capable for signal preprocessing task and analog to digital converter which is controlled by CPU. This sensor communicates with a remote site PC using TCP/IP protocols. The developed sensor executes performance tests for data acquisition accuracy estimations.