• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.168-173
• /
• 2002

Electrostatic discharge characteristics were studied by connecting human body model (HBM) with tunneling magnetoresistance (TMR) device in this research. TMR samples were converted into electrical equivalent circuit with HBM and it was simulated utilizing PSPICE. Discharge characteristics were observed by changing the component values of the junction model in this equivalent circuit. The results show that resistance and capacitance of the TMR junction were determinative components that dominate the sensitivity of the electrostatic discharge(ESD). Reducing the resistance oi the junction area and lead line is more profitable to increase the recording density rather than increasing the capacitance to improve the endurance for ESD events. Endurance at DC state was performed by checking breakdown and failure voltages for applied DC voltage. HBM voltage that a TMR device could endure was estimated when the DC failure voltage was regarded as the HBM failure voltage.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3
• /
• pp.343-348
• /
• 2013

In line with the advances in factory automation, various pieces of equipment are now operated in batch processes controlled by computers. However, many kinds of faults can occur in complicated and large systems, which can result in low productivity and economic loss. The reliability and safety of systems have been studied because of the difficulty of determining the severity and location of faults. Therefore, it is necessary to detect and diagnose such faults in order to guarantee the reliability and safety of the equipment. In this paper, a diagnosis method for the ball bearings of a hydraulic pump is applied using a vibration signal for the maintenance of injection molding equipment. The bearings' defects are selected as a main failure mode through a failure mode and effect analysis (FMEA). Usually, there are nonlinear and impulse components of vibration in a ball bearing with faults. For the effective fault diagnosis of a ball bearing, nonlinear diagnostic methods and time-frequency analysis are applied, in addition to the methods currently used, such as power spectrum, time series analysis, and statistical methods. As a result of this study, a failure diagnosis system is provided that is useful even for non-experts. This is a condition-based method that makes it possible to resolve problems in a timely and economical way, in contrast to the prior method, which required regular but wasteful maintenance based on the experience of expensive external experts.

• Korean Journal of Materials Research
• /
• v.26 no.10
• /
• pp.528-534
• /
• 2016

The aim of this paper is to consider the effect of the manufacturing processes on corrosion and centerline cracking of ancient bronze spoons. The ancient bronze spoons in question were made by several steps of forging, in reheated condition with cast ingots. The manufacturing method is similar to that of the modern spoons. The investigations include observations from light and scanning electron microscopes of the microstructure in terms of the crack propagation. Cracks in the centerline are caused by solute segregation in the center-line region; this solute is solidified in the final stage of bronze spoon manufacture. Centerline cracking is also caused by ${\alpha}$ phase segregation, accompanied by forged overlapping along the longitudinal direction of the spoons. A vertical stripe with cracks along the centerline of the spoon's width is formed by folding in the wrought process. The overlapping area causes crack propagation with severe corrosion on the spoon surfaces over a period of a thousand years. The failure mechanisms of ancient bronze spoons may be similar to that of modern spoons, and the estimation of the failure mechanisms of ancient spoons can be appropriate to determine failure causes for such modern spoons.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.51-55
• /
• 2019

The loss of safety for reservoirs brought about by climate change and facility aging leads to reservoir failures, which results in the loss of lives and property damage in downstream areas. Therefore, it is necessary to provide a Reservoir Failure Forecasting System for downstream residents to detect the early signs of failure (with sensors) in real-time and perform safety management to prevent and minimize possible damage. For the verification of established water level management criteria, 10 water level data up to reservoir capacity was selected. Weight factor and trend line were applied to dramatic increase section of water level in the 1 year period data. The results shows that water level criteria based on three even parts shows less than 7% of standard deviation and it is appropriate to verify management criteria.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.5-7
• /
• 2022

KEPCO's plan is undergoing a trial operation to replace the open-loop section with ring main units configuration where underground distribution lines are installed, by linking the multi-way circuit breakers auto (MCA) on the power side of each pad-mounted transformer. However, ring main units application mentioned above may cause the ripple effects, when implementing the configuration without a study of protection coordination. Because ring main units with classical pre-set protection devices contribution in fault condition didn't consider yet. For the reliable ring main units operation, it is necessary to resolve several protection issues such as the protection coordination with substation side, prevention of the transformer inrush current. These issues can radically deteriorate the distribution system reliability Hence, it is essential to design proper protection coordination to reduce these types of problems. This paper presents a scheme of ring main units' configuration and MCA's settings of time-current curves to preserve the performance of protection coordination among the switchgears considering constraints, e.g. prevention of the ripple effects (on the branch section when a transformer failure occurs and the mainline when a branch line failure occurs). It was confirmed that the propagation of the failure for each interrupter segment could be minimized by applying the proposed TCC and the interrupter settings for the MCAs (branch, transformer). Further, it was verified that the undetected area of the distribution automation system (DAS) could be supplemented by having the MCA configurated ring main units operate first, instead of the internal protection equipment in the transformer such as the fuse, STP when a transformer failure occurs.

• Geomechanics and Engineering
• /
• v.23 no.1
• /
• pp.85-92
• /
• 2020

This study adopted soil test and laboratory physical model experiments to simulate the tailings impoundment accumulation process according to the principle of similarity. Relying on the practical engineering, it analyzed the tailings deposition characteristics on dry beach surface during the damming process, as well as the variation rules of dam saturation line. Results suggested that, the tailings particles gradually became finer along the dry beach surface to inside the impoundment. The particle size suddenly changed at the junction between the deposited beach and the water surface, which displayed an obvious coarsening phenomenon. Besides, the deposited beach exhibited the vertical feature of coarse upward and fine downward on the whole. Additionally, in the physical model, the saturation line elevated with the increase in dam height, and its amplitude was relatively obvious within the range of 1.0-4.5 m away from the initial dam. Under flood condition, the saturation line height was higher than that under normal condition on the whole, with the maximum height difference of 4 cm. This study could provide an important theoretical basis for further studies on dam failure experiments and the evolution rules of leaked tailings flow.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2007

Purpose: Adenoid cystic carcinoma (ACC) is a relatively rare tumor that arises in glandular tissues of the head and neck region and sometimes has a protracted clinical course with perineural invasion and delayed onset of distant lung metastasis. Treatment failure of salivary ACC is most often associated with perineural and hematogenous tumor spread. However, very little has been known about the cellular and molecular mechanisms of perineural invasion and hematogenous distant metastasis of parotid ACC. This study was designed to develop an orthotopic tumor model of parotid adenoid cystic carcinoma in athymic nude mice. Experimental Design: A melanoma cell line was injected into the parotid gland of athymic mice to determine whether such implantation was technically feasible. A parotid ACC cell line was then injected into the parotid gland or the subcutaneous tissue of athymic mice at various concentrations of tumor cells, and the mice were thereafter followed for development of tumor nodule. The tumors were examined histopathologically for perineural invasion or regional or distant lung metastasis. We used an oral squmous cell carcinoma cell line as control. Results: Implantation of tumor(melanoma) cell suspension into the parotid gland of nude mice was technically feasible and resulted in the formation of parotid tumors. A parotid ACC cell line, ACC3 showed no significantly higher tumorigenicity, but showed significantly higher lung metastatic potential in the parotid gland than in the subcutis. In contrast, mucosal squmous cell carcinoma cell line doesn’t show significantly higher lung metastatic potential in the parotid gland than in the subcutis. The ACC tumor established in the parotid gland seemed to demonstrate perineural invasion of facial nerve, needs further study. Conclusion: An orthotopic tumor model of salivary ACC in athymic nude mice was successfully developed that closely recapitulates the clinical situations of human salivary ACC. This model should facilitate the understanding of the cellular and molecular mechanisms of tumorigenisis and metastasis of salivary ACC and aid in the development of targeted molecular therapies of salivary ACC.

• Journal of Gastric Cancer
• /
• v.22 no.4
• /
• pp.408-417
• /
• 2022

Purpose: Treatment options are limited after the failure of first-and second-line treatments in patients with HER2⁺ metastatic gastric cancer (mGC). The present study aimed to explore the efficacy, safety, and prognostic factors of apatinib efficacy as a third-line therapy for patients with human epithelial growth factor receptor 2-positive (HER2⁺) mGC. Materials and Methods: A total of 59 HER2⁺ mGC patients who received apatinib as third-line therapy were retrospectively enrolled in this two-center, single-arm, cohort study; the clinical response, survival data, and adverse events were retrieved. Results: The median progression-free survival (PFS) was 5.2 months (95% confidence interval [CI], 3.9-6.5), and the median overall survival (OS) was 8.2 months (95% CI, 6.6-9.8) Furthermore, forward stepwise multivariate Cox regression analysis showed that a higher Eastern Cooperative Oncology Group performance status score and multiple metastases were independently correlated with decreased PFS and OS (both P<0.05). The main adverse events were leukopenia (45.8%), hypertension (44.1%), thrombocytopenia (39.0%), hand-foot syndrome (37.3%), and elevated transaminase (33.9%). Grade 3 adverse events mainly included hypertension (5.1%) and neutropenia (5.1%); grade 4 adverse events did not occur. Conclusions: Apatinib is efficient and well tolerated in patients with HER2⁺ mGC as a third-line treatment, suggesting that it may be a candidate of choice for these patients.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.915-923
• /
• 2023

As environmental regulations on carbon emissions are strengthened worldwide, the existing internal combustion engine-centered automobile industry is being reformed. In particular, large buses and large cargo trucks are pointed out as one of the main causes of environmental destruction due to excessive carbon emissions. The E-Highway power collection system, which has recently been proposed as a solution, uses the vehicle's battery as a backup power source or regenerative braking, depending on whether the pan head of the pentograph installed in the vehicle is in contact with the overhead line. It is used to store the excess energy generated. However, wear through contact due to continuous contact reduces the current collection effect and causes failure. In this paper, by using the current difference, the horizontal position information of the panhead in contact with the overhead line is acquired, thereby reducing the abrasion of the conductor and the panhead Make it possible to follow the overhead line. The position estimation method proposed in this paper simply configures a device that can detect the position of the overhead line of the pantograph by the difference in resistance. It is economical and has the advantage of reducing the volume. The characteristics of the pantograph estimating the location of overhead lines were analyzed using the difference between the two currents of the current collector, the feasibility of the positioning estimation system was verified through simulations and experiments.

• Geotechnical Engineering
• /
• v.12 no.5
• /
• pp.17-26
• /
• 1996

The undrained behavior of Asan marine soil was investigated by using an automated triaxial testing device. The stress-strain behavior at the preand postfailure state of marine soil under undrained compression and eatension conditions was compared with the behavior of pure silt, pure clay and the overall behavior of Asan marine soil was predicted with the modified Camflay model and the bounding surface model. The marine soil sampled in Asan bay area was clayey silts with 70oA silt-30% clay content and the testing samples were prepared in both undisturbed and remolded conditions. All samples are normally consolidated with 400 kPa of effective mean confining pressure and each sample is unloaded to 200, 100, 67 kPa, respectively. And then the shear test was performed with different confining pressure. According to experimental results, there exists an unique failure line whose slope is lower than silt's and higher than clay's. It is identified that the undrained shear strength of normally consolidated samples increases after crossing the phase transformation line because of volume dilation tendency which is not seen in clay. Overconsolidated samples show different soil behavior compared with pure silt due to its tendency of change in volume. It is also found that the overall behavior of Asan marine soil cannot be predicted precisely with the modified Cam-clay model and the bounding surface model.