• 제목/요약/키워드: fading of inoculant

검색결과 3건 처리시간 0.015초

구상흑연주철 용탕 중 접종제의 접종능과 페이딩 거동 및 이들에 미치는 미량 원소의 영향 (Ability and Fading Behavior of Inoculants in Ductile Cast Iron Melt and Effect of Minor Elemets on them)

  • 권상빈;권해욱;남원식
    • 한국주조공학회지
    • /
    • 제25권2호
    • /
    • pp.102-108
    • /
    • 2005
  • The ability and fading behavior of inoculant in ductile cast iron melt and the effect of minor element on them were investigated. The result obtanied on nodularization and the performance of inoculant were more distinct when the melt was treated and held at the high temperature range of $1450{\sim}1500^{\circ}C$ than at the lower one of $1350{\sim}1400^{\circ}C$. The performance of 5.2%Mg-Fe-Si alloy was the best of 4 nodularizers. That of Fe-75%Si(I) alloy was better than other 4 inoculants. The performance of the Fe-75%Si(I) inoculant was deteoriated by the addition of sulfur or bismuth. On the other hand, that was improved by the addition of cerium, even though its extent was not big.

주철 용탕 중 접종제의 접종 효과와 감쇄 거동 (Effect and Fading Behavior of Inoculant in the Cast Iron Melt)

  • 이해성;권해욱
    • 한국주조공학회지
    • /
    • 제23권3호
    • /
    • pp.122-129
    • /
    • 2003
  • The abilities and fading behaviors of 5 different inoculants were evaluated by the thermal analyses of the melts which were held at constant temperature after addition in induction furnace. The silicon content was preserved at the high holding temperature of 1,450${\sim}$1,500$^{\circ}C$, which reduced by oxidation at the low one. The inoculation temperature should be higher to obtain better and reproducible result. The inoculation performance of 1%Ba-Fe-Si was the best on the bases of effect and fading behavior.

회주철 용탕 중 1.0 wt%Ba-Fe-Si 접종제의 성능에 미치는 S, Ce 및 Bi의 영향 (Effect of S, Ce and Bi on the Performance of 1.0 wt%Ba-Fe-Si Inoculant in Gray Cast Iron Melts)

  • 권해욱;남원식
    • 한국주조공학회지
    • /
    • 제24권5호
    • /
    • pp.295-303
    • /
    • 2004
  • The effects of three minor elements, S, Ce and Bi, on the inoculation ability and fading behavior of 1.0 wt%Ba-Fe-Si were investigated through thermal analysis. The performance of 1.0 wt%Ba-Fe-Si inoculant was better and more consistant at the high temperature range of $1,450{\sim}1,500^{\circ}C$ than that of low one of $1,300{\sim}1,400^{\circ}C$. That was improved with individual addition of three minor elements. The optimum amount of addition was 1.0% of the weight of inoculant added, respectively. That was improved also by the simultaneous addition of two or three kinds of minor elements. Even though worse with the addition of two kinds of them simultaneously than with individual addition, that was improved with the simultaneous addition of all three kinds over that with the individual one.