• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.609-615
• /
• 2010

Angular contact ball bearings in a high speed spindles are under the extreme conditions, such as high temperature, big centrifugal force and thrust cutting forces. So, the assembly contacts between spindle shaft and inner ring bearings, bearing housing and outer ring of bearings are occasionally unstable at high speed revolution. Furthermore, the ball contact angle of a bearing, which influence stiffness and lifetime of bearings, are changed according to loads and rotational speed. To analyze internal forces of a bearing under high speed revolution, the ball contact are calculated using nonlinear equations in consideration of rotational speed, thrust loads and raceway form. Diameter increase of inner and outer ring by influence factors, such as internal forces to inner and outer ring, centrifugal force and temperature of inner and outer rings are calculated to establish stable state in bearing assembly in high speed spindle. Finally, contribution ratio of influence factor to assembly design tolerance of inner and outer rings are shown and the stable assembly design tolerance are proposed.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.305-316
• /
• 1997

A more efficient method for obtaining the fatigue life enhancement of a structure member with fastener holes is described. It is based on the combined process of cold-expansion and ring-indentation. Residual stresses were induced onto premachined holes using ring-indentation process near the fastener hole combined with cold-expansion. And residual stresses at the vicinity of a hole were evaluated using a fracture mechanics approach. The compressive residual stresses were larger using the combined process than is in the case of simple cold-expansion. Fatigue testing of aluminum specimens showed that the fatigue crack growth retardation emanating from a circular hole was greater for the combined process than for a simple cold-expansion alone.

• 해양환경안전학회지
• /
• 제14권2호
• /
• pp.157-162
• /
• 2008

선박의 충돌회피조선에 있어서 조종성능은 중요한 요소이다. 일반적으로 사용되는 조종성능은 심수역을 대상으로 작성되며, 천수역을 항주하는 선박의 조종성은 일반적으로 선회성은 저하되고 침로안정성 또는 추종성은 향상된다. 이러한 선회성의 변화는 충돌회피에 있어 위험을 초래할 수 있다. 본 연구에서는 천수역의 조종성능을 반영함과 동시에 충돌위험정도를 쉽게 파악할 수 있도록 하기 위한 가변안전경계영역의 새로운 적용기법을 제시하였다. 수학적 수치시뮬레이션 검증을 통하여 새롭게 제안된 기법의 유용성을 확인하였다. 따라서 선박충돌위험에 대한 충분한 충돌회피 조선을 지원할 수 있을 것으로 기대된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.220-221
• /
• 2006

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved Quality of the lighting space. Above all, the advantages of ring-shaped electrodeless fluorescent lamp are the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps last up to 60,000 hours, There are intended as a highly efficient replacement for the incandescent reflector lamp in many applications. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 kHz and some specific conditions. In addition, the optical characteristics of ring-shaped electrodeless fluorescent lamp were measured including light flux, efficiency and color temperature for each case.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.209-214
• /
• 2016

This paper analyzes the magnetic property according to the machined shape of steel material with non-oriented silicon steel (50PN470/50A470), that is most commonly used in the design of electrical equipment. Toward this end, specimens were produced and divided into Bar-Specimen (Epstein Frame Tester) and Ring-Specimen (Toroidal Ring Tester). The characteristics of the electrical Silicon steel were measured using the instruments solely dedicated to measuring each specimen. The core loss of the Bar-Specimen, which is commonly used, was found to be less than that of the Ring-Specimen. This is a very important design factor in achieving the objectives of improving the product efficiency and predicting the performance of electrical equipment. It serves as a critical point of view in order to reduce the error between design value and product value. A comparative analysis was conducted regarding various characteristics (Hysteresis, B-H characteristic, Iron loss, Minor loop, Coercive force, Residual magnetic flux density, etc.) of the electrical silicon steel considered in the design of the electrical equipment according to the specimen.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.275-279
• /
• 2004

Yarn tension is a key factor that affects the efficiency of a ring spinning system. In this paper, a specially constructed rig, which can rotate a yam at a high speed without inserting any real twist into the yarn, was used to simulate a ring spinning process. Yarn tension was measured at the guide-eye during the simulated spinning of different yarns at various balloon heights and with varying yarn length in the balloon. The effect of balloon shape, yarn hairiness and thickness, and yam rotating speed, on the measured yarn tension, was examined. The results indicate that the collapse of balloon shape from single loop to double loop, or from double loop to triple etc, lead to sudden reduction in yarn tension. Under otherwise identical conditions, a longer length of yarn in the balloon gives a lower yarn tension at the guide-eye. In addition, thicker yarns and/or more hairy yarns generate a higher tension in the yarn, due to the increased air drag acting on the thicker or more hairy yarns.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.79-84
• /
• 2012

This study aimed to analyze the nonlinear buckling of ring-stiffened circular cylinders under uniform external pressure, e.g. hydrostatic pressure, considering material nonlinearity and initial imperfection. In the present study, we analyzed the collapse pressure of pressure vessels using ANSYS Workbench, which is a framework of finite element methods. First, linear buckling analysis is performed to find collapse modes of the model. Second, scaling the first mode shape with small factor, geometric model is pre-deformed. And then, by analyzing the nonlinear buckling of the pre-deformed shape, the collapse pressure is estimated. To verify the validity of the analyses, we compared the results with Ross' experimental results. Finally, we applied it to ring-stiffened circular cylindrical shell of the pressure hull of a small submarine.

• 한국광학회지
• /
• 제17권5호
• /
• pp.475-479
• /
• 2006

본 논문에서는 폴리머 링 광공진기를 이용하여 집적광학형 K-band용 마이크로웨이브 대역통과 필터를 제안하고 구현하였다. 특히, 열광학 효과를 이용하여 광공진기의 공진파장을 변화시킴으로써 대역통과 필터의 전달특성을 전기적으로 조절하였다. 측정된 필터의 중심주파수는 20 GHz, 소멸비는 약 15 dB, 3 dB 대역폭은 2 GHz, 그리고 Q값은 10이었다. 마이크로웨이브 필터에서 중심주파수의 출력특성을 27 dB범위 내에서 ${\sim}6.7dB/mW$로 조절할 수 있었다. 전기적으로 조절되는 전달특성을 갖는 이 필터는 마이크로웨이브스위치 등으로 응용할 수 있을 것으로 기대된다.

• 호남수학학술지
• /
• 제45권3호
• /
• pp.397-409
• /
• 2023

Let R be an associative ring with identity and M be a left R-module. In this paper, we define modules that have the property (δ-CE) ((δ-CEE)), these are modules that have a δ-supplement (ample δ-supplements) in every cofinite extension which are generalized version of modules that have the properties (CE) and (CEE) introduced in [6] and so a generalization of Zöschinger's modules with the properties (E) and (EE) given in [23]. We investigate various properties of these modules along with examples. In particular we prove these: (1) a module M has the property (δ-CEE) if and only if every submodule of M has the property (δ-CE); (2) direct summands of a module that has the property (δ-CE) also have the property (δ-CE); (3) each factor module of a module that has the property (δ-CE) also has the property (δ-CE) under a special condition; (4) every module with composition series has the property (δ-CE); (5) over a δ-V -ring a module M has the property (δ-CE) if and only if M is cofinitely injective; (6) a ring R is δ-semiperfect if and only if every left R-module has the property (δ-CE).

• Applied Biological Chemistry
• /
• 제41권1호
• /
• pp.99-103
• /
• 1998

Triazolopyrimidine sulfonanilide (TP) 유도체는 널리 사용되고 있는 제초제 중의 하나이다. 우리는 TP 유도체 화합물의 골격을 이루고 있는 벤젠 고리를 pyrimidine 고리로 치환시킨 새로운 3 종류의 sulfonamide 유도체(TPP)를 합성하고, 보리에서 추출한 acetolactate synthase (ALS)의 저해 활성도를 측정한 결과 0.005 부터 2 mM 사이의$I_{50}$값을 얻었다. $I_{50}$ 값의 비교에서 pyrimidine 고리에 methyl기가 치환된 TPP 유도체는 methoxy기가 치환된 유도체 보다 높은 저해 활성도를 나타내었다. 또한 triazolopyrimidine 고리에 cyclopentano 고리로 치환된 TPP 유도체는 methyl- 및 phenyl가 치환된 유도체보다 우수한 저해 활성도를 보였다. 따라서 새로운 TPP 유도체의 제초 효력은 치환기에 의한 분자내 전자 분포 변화와 밀접한 관계가 있으나 치환기의 크기에 따른 입체적 장애 요인은 저해 활성도에 전혀 영향이 없음을 알 수 있었다.