• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.181-189
• /
• 1998

In order to investigate the effect of base oil composition on the electronic insulating oil's performances, an experimental study has been conducted using different oils. Owing to their properties, like lower pour point and gas absorbing, naphthenic base oils are used more often than paraffmic base oils for the electronic insulating oil application. Naphthenic and paraffinic base oils are significantly different in their aromatic hydrocarbon content. In this paper, PXE(para xylyl ethane), LAB(linear alkylbenzene), C13 aromatic hydrocarbon mixture and C17 aromatic hydrocarbon mixture are investigated regarding their influence on insulating oil's performances. According to present study, breakdown voltage decreased with increasing aromatic lydrocarbon content in a deep dewaxed paraffmic base oil. However, any changing in the dissipation factor was not recognizable at small treated level. Furthermore, the volume resistance was not influenced by aromatic hydrocarbon content. The gassing tendency was found as a highly sensible property, changing with treating aromatic hydrocarbons. The higher benzene ring content in the hydrocarbon, the better gassing tendency.

• Steel and Composite Structures
• /
• 제44권1호
• /
• pp.1-15
• /
• 2022

The weld quality has always been an important factor affecting the development of exposed CFT column-base joint. In this paper, a new type of exposed RCFST column-base joint is proposed, in which the high strength steel bars (USD 685) are set through the column and reinforced concrete foundation without any base plate and anchor bolts. Three specimens, the varying axial force ratio (0, 0.25 and 0.5), were tested under cyclic loadings. In addition, the bending moment capacity, energy dissipation capacity and deformation capacity of column-base joints were clarified. The experimental results indicated that the axial force ratio increases the stiffness and the bending moment and improves the energy dissipation capacity of column-base joints. This is because a large axial force can limit the slip between steel tubular and infilled concrete effectively. The specimens show stable hysteresis behavior.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.173-178
• /
• 1995

The verification phase of knowledge base is an important part for developing reliable expert systems, especially in nuclear industry. Although several strategies or tools have been developed to perform potential ewer checking, they often neglect the reliability of verification methods. Because a Petri net provides a uniform mathematical formalization of knowledge base, it has been employed for knowledge base verification. In this work, we devise and suggest an automated tool, called COKEP (Checker Of Knowledge base using Extended Petri net), for detecting incorrectness, inconsistency, and incompleteness in a knowledge base. The scope of the verification problem is expanded to chained errors, unlike previous studies that assumed error incidence to be limited to rule pairs only. In addition, we consider certainty factor in checking, because most of knowledge bases have certainty factors.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.97-102
• /
• 2005

As the railroad-base is an important factor to maintenance the rolling stocks, it is essential to improve the current problems of the environment pollution, nose, vibration, welfare, work condition and to applicate the performance betterment cases to the new base construction and pre-base maintenance. When the new base construction and pre-base maintenance is proceeded, it is necessary to construct the optimized system which includes the user's opinions enough to prevent the waste of the budget ,in that some part of the budget is spent to improve convenience, work condition, and the fault of base system after the construction. Therefore, this research intends to present the problem of the pre-constructed facilities, the testing operators' opinions, the analysis and the investigation of facilities' improvement, thorough the indication of provisions and the analysis of the result of the survey of testing operators.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.71-79
• /
• 2003

The purpose of this study was to investigate bond strength of denture base resin repaired according to contamination. One commercial denture base resin and two different kinds of relines resin were tested; Lusiton 199(denture base resin), Vertex(reline resin) and TokusoRebase(repair resin). The specimens were processed according to the manufacturer's instructions to cured denture base resin(polymethylmethacrylate; PMMA) and reline resin. Bond strengths were examined by use of a three-point transverse flexural strength test. Data were analyzed with two-factor analysis of variance and Duncan's post-hoc test at $\alpha$=0.05. Generally, the bondstrength of heat-cured resin(Lusiton 199) was higher than the other resins. The contaminations produced an decrease in bond strength. Therefore the contamination, such as saliva or water must be avoided during the laboratory repair procedures.

• 대한기계학회논문집B
• /
• 제30권10호
• /
• pp.987-995
• /
• 2006

A reversed trapezoidal fin with the fluid in the inside wall is analyzed and optimized in this study. As a fin base boundary condition, the heat transfer from inside wall fluid to the fin base is considered. The values of fin base temperature with the variations of inside wall fluid convection characteristic number and fin base length are listed. The heat transfer, fin effectiveness, fin length and fin base height are optimized as a function of fin base length, convection characteristic number ratio, fin shape factor and fin volume.

• 한국자동차공학회논문집
• /
• 제16권6호
• /
• pp.81-87
• /
• 2008

A geometrically asymmetric trapezoidal fin with variable fin base thickness and height is optimized based on the fixed fin base height using a one-dimensional analytic method. The temperature profile along the normalized X position in the fin is presented. For the fixed fin base height, the optimum heat loss, fin length and efficiency as a function of inside fluid convection characteristic number, fin base thickness and height, fin shape factor, convection characteristic numbers ratio and ambient convection characteristic number are represented. One of the results shows that the effect of fin base height and ambient convection characteristic number on the optimum values is remarkable.

• 정보저장시스템학회:학술대회논문집
• /
• 정보저장시스템학회 2005년도 추계학술대회 논문집
• /
• pp.210-214
• /
• 2005

The purpose of this paper is to study the effects of the flexibility of HDD base plates on spindle vibration via theoretical predictions and experimental measurements. The flexibility of the base plate can significantly affect HDD spindle vibration. This is the most prominent feature in 2.5 inch HDD. Nevertheless, theoretical analysis of the spindle vibration often neglects the flexibility of the non-rotating part including spindle, base plate, and top cover. Our theoretical model developed in University of Washington can include the flexibilities of spindle and base plate. As a result, our theoretical prediction generally agrees well with our experimental measurements in vibration analysis. Moreover, Because of its small form factor, industrial practice is to use flanged disks instead of regular disks in vibration testing of prototypes. Our experimental measurements indicate that flanged disks and regular disks have very different behavior when the frequency is above 1 KHz.

• Nuclear Engineering and Technology
• /
• 제28권6호
• /
• pp.522-531
• /
• 1996

The adoption of expert systems mainly as operator supporting systems is becoming increasingly popular as the control algorithms of system become more and more sophisticated and complicated. The verification phase of knowledge base is an important part for developing reliable expert systems, especially in nuclear industry. Although several strategies or tools have been developed to perform potential error checking, they often neglect the reliability of verification methods. Because a Petri net provides a uniform mathematical formalization of knowledge base, it has been employed for knowledge base verification. In this work, we devise and suggest an automated tool, called COKEP(Checker Of Knowledge base using Extended Petri net), for detecting incorrectness, inconsistency, and incompletensess in a knowledge base. The scope of the verification problem is expanded to chained errors, unlike previous studies that assume error incidence to be limited to rule pairs only. In addition, we consider certainty factor in checking, because most of knowledge bases have certainty factors.

• 정보저장시스템학회논문집
• /
• 제2권2호
• /
• pp.111-116
• /
• 2006

The purpose of this paper is to study the effects of the flexibility of HDD base plates on spindle vibration via theoretical predictions and experimental measurements. The flexibility of the base plate can significantly affect HDD spindle vibration. This is the most prominent feature in 2.5 inch HDD. Nevertheless, theoretical analysis of the spindle vibration often neglects the flexibility of the non-rotating part including spindle, base plate, and top cover. Our theoretical model developed in University of Washington can include the flexibilities of spindle and base plate. As a result, our theoretical prediction generally agrees well with our experimental measurements in vibration analysis. Moreover, because of its small form factor, industrial practice is to use flanged disks instead of regular disks in vibration testing of prototypes. Our experimental measurements indicate that flanged disks and regular disks have very different behavior when the frequency is above 1 KHz.