• 대한치과교정학회지
• /
• 제25권5호
• /
• pp.593-604
• /
• 1995

하악 전치의 밀집은 가장 흔히 볼 수 있는 부정교합의 특징중의 하나이며 교정치료후의 안정성과 재발 측면에서도 중요 관심의 대상이다. 이를 유발시킬 수 있는 원인으로 그동안 많은 요소가 연구되어 왔으며 치아의 크기도 그 중의 하나이다. 현재 교정치료의 진단과 치료에 사용되고 있는 치아 크기 측정에서는 순설측 폭경의 의미가 간과되어 왔는데 Peck과 Peck이 이상적인 하악 전치부 배열을 가진 경우 절치의 근원심 폭경은 평균보다 작고 순설측 폭경은 평균보다 크다는 통계학적 수치를 발표하고 MD/FL index가 하악 전치부 밀집과 높은 상관관계를 가진다고 주장하였다. 본 연구는 한국인에 있어서 하악 절치의 형태 및 크기와 하악 전치부 밀집간의 상관관계, 그들과 전악궁의 치아 밀집간의 연관성을 알아보기 위해 시행되었다. 11세에서 17세에 이르는 154명의 석고 모형을 채득하여 Irregularity index 1 미만인 35명의 정상군과 Irregularity index 1 이상인 119명의 밀집군으로 분류하고 석고모형상에서 연관성 있다고 추정되는 계측항목을 측정한 후 통계처리하여 다음과 같은 결론을 얻었다. 1. 하악 절치의 근원심 폭경은 밀집군에서 큰 값을 보였으나 중절치에서만 유의성을 보였고, 순설측 폭경과 MD/FL index는 유의차가 없게 나타났다. 2. Irregularity index는 밀집군의 하악 절치의 근원심 폭경, MD/FL index와 유의성있는 상관관계를 나타냈으나 순설측 폭경과는 상관관계를 보이지 않았다. 또한 상하악의 Arch length discrepancy, 치관 근원심 폭경 총화와는 순상관 관계를, 하악 견치간 폭경과 제 1 소구치간 폭경과는 역상관관계를 나타내었다. 3. 상하악의 arch length discrepancy는 하악 절치의 근원심 폭경, overbite과 유의성 있는 상관관계를 나타내었고 순설측 폭경과는 상관관계가 나타나지 않았다. 하악의 arch length discrepancy는 하악 절치의 MD/FL index와, 상악의 arch length discrepancy는 측절치의 MD/FL index에서 상관관계를 나타내었다. 4. 정상군과 밀집군의 각 계측항목의 t-검정 결과 하악의 arch length discrepancy, overbite에서만 유의차를 나타내었다.

• 대한치과교정학회지
• /
• 제41권3호
• /
• pp.184-190
• /
• 2011

하악 절치부에서 보이는 총생은 하악 절치의 큰 MD/FL (mesiodistal/faciolingual) 인덱스와 관련이 있음이 보고되었다. 큰 MD/FL 인덱스를 보이는 절치에서 치간 삭제를 통해 근원심폭경을 줄여 MD/FL 인덱스를 줄이고 공간을 확보하는 방법이 정당화되기 위해서는 MD/FL 인덱스가 클수록 인접면 법랑질 두께가 더 두꺼워야 할 것이다. 본 연구의 목적은 하악 절치의 MD/FL 인덱스, 근원심폭경, 최대풍융부/치경부폭경비와 같은 치아의 형태적 요인과 인접면 법랑질 두께 사이에 상관관계가 있는지를 조사하는 것이었다. 발거된 하악 절치 40개에서 MD/FL 인덱스, 근원심폭경, 최대풍융부/치경부폭경비를 구하였으며, 근원심폭경을 구한 선상까지 순면을 연마하여 그 단면에서 법랑질 두께를 측정하였다. 치경부근원심폭경은 순면을 연마한 단면에서의 좌우측 백악법랑경계 사이의 폭경을 측정하였다. 이후 법랑질 두께와 MD/FL 인덱스, 근원심폭경, 최대풍융부/치경부폭경비의 상관관계를 조사하였다. 연구결과 하악 절치의 법랑질 두께는 편측에서 $0.75{\pm}0.07mm$였고, 근원심폭경은 $5.56{\pm}0.40mm$였다. 법랑질 두께와 근원심폭경 간에는 유의한 상관관계가 있었지만(R = 0.68), 법랑질 두께와 MD/FL 인덱스, 법랑질 두께와 최대풍융부/치경부폭경비 간에는 상관관계가 없었다. 이는 근원심폭경이 큰 치아에서는 치간 삭제를 더 많이 할 수 있지만, 동일한 근원심폭경을 갖는 절치들의 경우 MD/FL 인덱스가 큰 하악 절치 또는 최대풍융부/치경부폭경비가 커서 삼각형의 형태를 갖는 하악절치에서 치간 삭제를 더 많이 할 수는 없다는 것을 나타낸다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.553-553
• /
• 2001

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth were radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal.(omitted)

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.562.2-562
• /
• 2001

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determined as follows. The teeth were radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal.(omitted)

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.357-367
• /
• 1993

The purpose of this study was to evaluate the fracture strength of class II restored premolars with amalgam, posterior composite, amalgam - Ketac silver, resin - Ketac silver restorations at marginal ridge. Fifty extacted maxillary and mandibular premolar teeth that were caries free, fracture free, and restoration free were selected and randomly divided into five groups : Group 1 : 10 intact teeth, Group 2 : 10 teeth with class II cavities and restored with, amalgam, Group 3: 10 teeth with class II cavities and restored with posterior resin, Group 4 : 10 teeth with class II cavities and restored with amalgam - ketac silver, Group 5 : 10 teeth with class II cavities and restored with resin - Ketac silver. All teeth were mounted in base of dental stone within metal rings of 2cm diameter, exposing only the crown portion. Class II mesio - occlusal or disto - occlusal cavities were prepared into specimens of Group 2 through 5 by using a No. 710 fissure bur. The occlusal portion was prepared to a faciolingual width of 1.5mm and a pulpal depth of 1.5mm. The proximal protion was prepared to a faciolingual width of 4mm, a occlusogingival height of 4mm, and a gingival floor of 1.5mm. The teeth in Group 2 and 3 were resotored with silver amalgam apd posterior resin respectively. In Group 4 and 5, proximal portions were first filled with Ketac silver 1.5mm gingivally and remaining cavities were restored with amalgam and posterior resin respectively. All specimens were stored in 100 % relative humidity at $37^{\circ}C$ for 48 hours before testing. All teeth were subjected to a compressive load in a Universal Instron Testing Machine at marginal ridges. The loads required to fracture the restorations were recorded in killograms and the data obtained were subjected to statisticall analysis. The results were all follows : 1. The fracture strength of Group 1 which were unprepared were $100{\pm}10.1\;kg$ and the higher values than Group 2, 3, 4, 5 which were prepared and resotred. 2. In restored groups, Group 2 had the higher fracture strength($81.8{\pm}12.4\;kg$) than other groups and Group 4 had the lowest fracture strength($66.8{\pm}9.2kg$). 3. There were significant differences between fracture strength of between Group 1 and Group 3, 4, 5(P<0.05), but not significant difference between fracture strength of Group 2, 3, 4, 5(P>0.05).

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.432-440
• /
• 2002

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth there radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal. A line was drawn connecting these two points extending through the crown of the tooth. The point at which the line crossed the external crown surface was recorded as facial, incisal, lingual. Degree of root curvature was determined by Schneider Protractor Method. Both section method and clearing method were used in this study. By section method, 100 mandibular incisors were embedded in clear resin and transeverse serial sectioned at 0.5, 1.0, 2.0, 3.0, 4.0, 5.0mm level from root apex. The resected surfaces were stained by methylene blue and examined under $\times$40 magnification with a stereomicroscope. By clearing method, 100 mandibular incisors were cleared in methysalicylate after decalcification with 10% nitric acid and evaluated under $\times$18 magnification with a stereomicroscope. The results were as follows ; 1. 29% had the center of the plotted straight-line access facial to incisal edge, whereas 71% had straight-line access at the incisal edge. When incisal wear classified as extensive, the straight-line access was plotted on the incisal edge 95.5%. When incisal wear classified as slight/none, the straight-line access was plotted on the facial 65.9%. 2. Degree of curvature of main canal was straight or almost straight, and only 10% in buccolingual direction had a degree of curvature greater than 20 degrees and 5.5% in mesiodistal direction had. 3. In section method, canal configuration analysis showed that 51% of the specimen classified as type I, 27% as type II, 12% as type III, 10% as type IV. For theses setions with two canals, the incidence of an isthmus was 36.7%, 64.3%, 79.2%, 96.3%, 97.4%, 97.6% at each level and highest in 3~5mm sections. 4. In clearing method, canal configuration analysis showed that 74% of the specimen classified as type I, 11% as type II, 6% as type III, 9% as type IV. These results suggested that traditional access from lingual should be moved as far toward the incisal as possible to locate and debride the lingual canal and root canal system should be cleaned, shaped completely and obturated three dimensionally for successful endodontic treatment.

• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.16-22
• /
• 2001

The purpose of this study was to evaluate the marginal microleakage of condensable composite resin restorations according to flowable resin lining of internal cavity wall. The eighty extracted human molar teeth without caries and/or restorations are used The experimental teeth were randomly assigned into four groups of ten teeth each. Eighty caries-free extracted human molars were used in this study. The conventional class II cavities (box-shaped on mesial and distal surface, faciolingual width : 3mm, gingival wall depth : 1.5mm) were prepared 1mm below cementoenamel junction with a # 701 carbide bur. The teeth were divided into four groups, and then each group were subdivided into A & B group according to flowable resin & compomer lining ; Group 1-A : Tetric Ceram filling, Group 1-B : Tetric Flow lining and Tetric Ceram filling, Group 2-A Ariston pHc filling, Group 2-B : Tetric Flow lining and Ariston pHc filing, Group 3-A SureFil filling, Group 3-B : Dyract Flow lining and SureFil filling, Group 4-A : Pyramid filling, Group 4-B : Aeliteflo lining and Pyramid filling. To simulate as closely as possible the clinical situation during retoration placement, a "restoration template" was fabricated, and the condensable resin was filled using a three-sited light-curing incremental technique. All the materials used were applied according to the manufacturers' instructions. The specimens were stored in the 100% humidity for 7 days prior to thermocycling (100 thermal cycles of 5~55$^{\circ}C$ water with a 30-second dwell time) The specimens were immersed in 2% metyleneblue dye for 24 hours, and then embedded in transparent acrylic resin and sectioned mesiodistally with diamond wheel saw. The degree of marginal leakage was scored under stereomicroscope ($\times$20) and the data were analyzed by Kruskal-Wallis test and Wilcoxon signed ranks test. The results were as follows : 1. In the gingival margins of all the group, microleakage of subgroup B was less than subgroup A. 2. In the group 1, 2, 4, there was significant differences between subgroup A and B (p<0.05), but in the group 3, there was not significant different between group 3-A (SureFil) and group 3-B (Dyract flow/SureFil) (p>0.05). 3. In the subgroup A and B, there was significant different between all group except group 4 of subgroup A. From the results above, it was suggested that the cavity lining of flowable resin and flowable compomer in condensable resin restoration decrease microleakage at gingival margin, and does improve their ability to seal the gingival margin of class II preparation.