• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.2
• /
• pp.184-199
• /
• 1996

The challenges to achieve three dimensional facial proportionality and occusal stability in many patients with complex dentofacial deformity have been met by the development and use of the maxilla, mandible, and chin surgery techniques in combination with efficient orthodontic treatment. There is a clinical, biological, and biomechanical foundation for simultaneous surgical repositioning of the maxilla, mandible, and chin in a significant proportion of adult and adolescent patients. A combination of the surgical and orthodontic approach may provide increased treatment efficiencies and optimal esthetic results. Art and science to determine the treatment objectives, specifically, the desired soft tissue changes are firstly established by using the clinician's "esthetic sense" of the facial beauty and proportion aided to a few cephalometric guidelines. In this sense, the dependence on the clinician's "esthetic eye" by Dr. Bell is more important in analyzing the facial proportion than the satisfaction of rigid cephalometric norms. The purpose of this article was to elucidate the indication for simultaneous surgical repositioning of the maxilla, mandible, and chin, and to describe the clinical cephalometric analysis for orthognathic surgery. Representative 6 case reports were presented and discussed to illustrate the esthetic, orthodontic, and surgical treatment objectives with long-term follow-up.

• Archives of Craniofacial Surgery
• /
• v.17 no.3
• /
• pp.162-164
• /
• 2016

Stafne bone cavity is a rare mandibular defect that was first reported by Edward C. Stafne in 1942. It commonly presents with a well-demarcated, asymptomatic, unilateral radiolucency that indicates lingual invagination of the cortical bone. A 52-year-old female patient who with nasal bone fracture, visited the hospital. During facial bone computed tomography (CT) for facial area evaluation, a well-shaped cystic lesion was accidentally detected on the right side of the mandible. Compared to the left side, no swelling or deformity was observed in the right side of the oral lesion, and no signs of deformity caused by mucosal inflammation. 3D CT scans, and mandible series x-rays were performed, which showed a well-ossified radiolucent oval lesion. Axial CT image revealed a cortical defect containing soft tissue lesion, which has similar density as the submandibular gland on the lingual surface of the mandible. The fact that Stafne cavity is completely surrounded by the bone is the evidence to support the hypothesis that embryonic salivary gland is entrapped by the bone. In most cases, Stafne bone cavity does not require surgical treatment. We believe that the mechanical pressure from the salivary gland could have caused the defect.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.4
• /
• pp.287-294
• /
• 2006

The secondary correction of cleft lip nasal deformity (CLND) presents difficult surgical problems. Characteristically, nostrils are asymmetric. The present study was aimed to examine and compare the effect of Straith's alar web Z-plasty, Millard's alar web Z-plasty, alar web excision, and lateral V-Y advancement of the alar base for augmentation of the nostril with or without lengthening the columella in CLND. The subjects were 28 patients with unilateral cleft lip, who had secondary nostril correction. The nostril correction methods were Straith's alar web Z-plasty, Millard's alar web Z-plasty, alar web excision, and lateral V-Y advancement of the alar base. Facial photographs were taken before and 20 days after the operation. By using Adobe photoshop, the columella length and the nostril width were measured from the facial frontal photograph and Worm's eye view. The degree of improvement was calculated and statistically analyzed. The degree of improvement of the columella length using Straith's alar web Z-plasty was 70.20%. And then Millard's alar web Z-plasty was 55.01%, alar web excision was 39.93%, and lateral V-Y advancement of the alar base was 16.38% in order. The degree of improvement of the nostril size using lateral V-Y advancement of the alar base was 55.26%. And then alar web excision was 52.72%, Millard's alar web Z-plasty was 34.86%, and Straith's alar web Z-plasty was 16.06% in order. Straith's alar web Z-plasty and Millard's alar web Z-plasty resulted in elongation of the columella, equalization of asymmetrical nostril, and enlargement of small nostrils. Alar web excision enlarged nostrils and restored symmetry. Lateral VY advancement of the alar base increased nostril width and enlarged nostrils. These results indicate that the correction of nostrils improve the shape and the symmetry of the nostrils in CLND.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.63-71
• /
• 2011

Major type of facial asymmetry results from facial deformity and needs surgical correction. To diagnose facial asymmetry and set a treatment plane for patients, setting a sagittal reference plane is crucial. The purpose of this study is comparison of measurements of sagittal soft tissue reference point to three different sagittal planes. The subjects are 25 of asymmetry patients (M:15, F:10) and 19 of normal people. There are differences in point Gnathion and Stomion. Most of measurement of sagittal reference points showed within 1 mm difference from sagittal reference plane. Deviation of point Pronasale in Sa1 plane revealed significant difference among 3 reference planes. The deviation of Gnathion was proportional to the deviation of Stomion in all 3 reference planes.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.303-308
• /
• 2008

Purpose: The purpose of this study is to develop three-dimensional computerized anthropometry(3DCA) and to compare its reliability and accuracy 3DCA with manual anthropometry(MA) for measurement of lips and nasal deformities in unilateral cleft lips and palate(UCLP) patients. Methods: Samples were consisted of six UCLP patients whose facial plaster models were available immediately before and 3 months after the cleft lip surgery. MA of the facial plaster models was carried out using an electronic caliper. In 3DCA, three-dimensional auto-measuring program was used to digitize landmarks and to measure three-dimensional virtual facial models (3DVFM), which was generated with a laser scanner and 3D virtual modeling program. Intraclass correlation coefficients(ICC) were calculated to evaluate reliability and reproducibility of the variables in both methods, and Wilcoxon's signed rank test was done to investigate the difference in values of the same variables of facial models of each patient between two methods. Results: All ICC values were higher than 0.8, so both methods could be considered reliable. Although most variables showed statistical differences between two methods(p<0.05), differences between mean values were very small and could be considered not significant in clinical situation. Conclusion: In clinical situation, 3DCA can be an objective, reliable and accurate tool for evaluation of lips and nasal deformities in the cleft patients.

• Archives of Plastic Surgery
• /
• v.38 no.2
• /
• pp.166-172
• /
• 2011

Purpose: Facial contouring surgery for improving congenital, acquired deformity and senile change were attempt in past. Recently contouring surgery became more interested subject for improving the flat forehead and temple area. Many synthetic materials were used such as Collagen, silicon, polyacrylamide gel as liquid form and Gore-tex, silicon implant, endotine as solid form. But, these synthetic implants associate complications as foreign body reaction, infection, displacement, granuloma formation and absorption. Auto-fat injection are used for disfigurement of many part of body. We did auto-fat injection for facial contouring of forehead and temple region. Auto-fat injection is suitable without foreign body reaction, displacement, and toxic reaction. Also auto-fat is relatively simple to obtain from patient and less expensive and able to repeat surgeries. Methods: From 2006 to 2009, 150 patients were treated with Auto-fat injection for facial contouring. For follow up, we sent questionnaire to all patients but 110 patients returned answer sheets. The patients consisted of 20 male patients and 90 female patients with an age ranged from 26 to 60, and the mean 43. Fat tissue were injected 6-8 cc in forehead, 7-12 cc in temple area and fat were harvested from thigh and abdomen. Results: In follow up, all patients, showed absorption of injected fat varied degree and except two patients all patients underwent secondary fat injection. Complications were minimal and neuropraxia of facial nerve were recovered. Most of the patients were satisfied with result of procedure, and answered that they recommend same procedure to their friends and will do surgery again. Conclusion: Auto-fat injections were implemented for facial contouring in 150 patients and obtained satisfactory result. Auto-fat injection is relatively easy procedure and applicable widely. Even though, by passing time, some of the injected fats are absorbed, auto-fat injection could be choice of treatment for contouring forehead and temple. With accumulations of cases and development of surgical technique, better result could be expected.

• Korean Journal of Head & Neck Oncology
• /
• v.7 no.1
• /
• pp.24-34
• /
• 1991

Lymphangioma is a benign, growth of lymphatic tissue that is present at birth or develops in early childhood, which may cause serious alterations in growth and developmemt. The problems with facial lymphangioma is usually releated directly to their size and to the area of the face which is involved. The lesions themselves may range from small, localized blemishes to huge facial masses involving both soft tissue and underlying bone and causing great distortion and asymmetry. The facial bones are seldom involved, but the natutal evolution of an individual lesion often cannot be accurately predicted when the child is first seen. Any changes in the underlying facial bone could be due either to a direct growth of the lesion into the bone, or secondary to pressure of the lesion growing outside the bone itself. A case of cystic lymphangioma extending from the neck to the tongue is reported. A six-year-old female was admitted because of swelling of the tongue. At that time, the tongue reportedly reached the extraoral size of 7x5x2.5cm and a soft, diffuse swelling of left anterior neck was revealed. The removal of cystic mass including left neck dissection and partial glossectomy were undertaken. The another case of lymphangioma is located on mandibular cheek. A twenty nine-year-old male was admitted because of palpable mass of the left mandibular area and fissure of palate. The radical excision of mass with mandibulectomy of body were undertuken. Thus we reported such a rare case and reviewed the lymphangioma.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.4
• /
• pp.407-413
• /
• 1999

Maxillary duplication is a kind of proliferative neurocristopathy and considered to arise from bifurcation of neural crest elements soon after migration into mandibular arch. Sometimes this malformation is accompanied with oblique facial cleft. Usually this type of maxillofacial malformation requires multiple surgical intervention and the results are far from ideal. It became more troublesome if it had not been properly corrected on time, because secondary deformities could be developed from growth and development of abnormal tissues. This is a case of a 25-year-old-female patient who showed severe facial asymmetry thought to secondary deformity of maxillary duplication and masticatory disturbance due to multiple supernumerary teeth on posterior part right maxilla. We successully treated these deformities through four times of surgery of bone resection, orthodontic treatment, zygomatic and orbital reconstruction, orthognathic surgery and scar revision... ect. So we reported this rare case with review of literatures.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.1
• /
• pp.75-84
• /
• 1995

This study was designed as a reference of vertical dimension in prosthetic treatment. The author analyzed six facial measurements, namely, (1) the height of lower face at maximum intercuspal position, (2) the height of lower face at resting position, (3) midface, (4) external ear and lateral wall of orbit, (5) interpupillary distance, (6) distance between pupil and mouth in the 100 Won-kwang Univ. Dental collage students(50 : male, 50 : female), who have normal occlusion, no posterior prosthesis, no experience of orthodontic treatment, and no deformity of facial soft tissue and no temporomandibular dysfunction. The results of this study were as follows : 1. The length of midface was shortest and the inter-pupillary distance was longest in both male and female. 2. The length difference with the length of midface and lower face at maximum intercuspal position was 5.64mm in male and 2.23mm in female, so the lower face was longer, 3. The facial measuring component, similar to lower face at maximum intercuspation, was the length of between medial wall of external ear and lateral wall of orbit. It's difference was 1.3mm in male, 1.77mm in female, and the lower face was shorter. 4. The difference of lower facial length in resting position and maximum intercuspation was 2.48mm in male, 2.24mm in female, the length of resting position was therefore longer. 5. The most clost correlation with the height of maximum intercuspal positioning lower face was resting lower face in both groups.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.6
• /
• pp.360-367
• /
• 2013

Purpose: The purpose of this study was to perform three-dimensional (3D) assessment of facial soft tissue in patients with skeletal Class III and mandibular asymmetry after orthognathic surgery. Methods: Samples consisted of 3D facial images obtained from five patients with A point-nasion-B point angle less than 2 degrees, and more than 5 mm of menton deviation. All patients had been treated at Gangneung-Wonju National University Dental Hospital from 2009 to 2012. They had undergone orthognathic surgery of Lefort I, and sagittal split osteotomy for correction of skeletal deformity, and orthodontic treatment. Facial scanning was performed before treatment (T1) and post-surgical orthodontic treatment (T2). Linear and angle variables of soft tissue landmarks, antero-posterior facial depth, and facial volume were measured. Results: No significant differences in width of the alar base, mouth width, and nasal canting were observed between T1 and T2. However, lip deviation, menton deviation, alar canting, lip canting, and menton deviation angle were significantly reduced at T2. Antero-posterior facial depth on the axial plane parallel to the left cheilion was significantly reduced on the deviated side and significantly increased on the non-deviated side at T2. Volume of the lower lateral and lower medial parts of the face was reduced on the deviated side, and volume of upper lateral and lower lateral parts on the non-deviated side was significantly increased at T2. Conclusion: After orthognathic surgery, facial asymmetry of soft tissue was improved following skeletal changes, especially the mandibular region. Although the length of the alar base and mouth width did not change, lip and soft tissue menton were displaced to the medial side after treatment. Facial depth also became symmetric after treatment. Facial volume showed a decrease on the lower part of the deviated side and that on lateral parts of the non-deviated side showed an increase after treatment.