The Purpose of this study was to know the differences between the occlusal plane angles formed by F-H plane on cephalograms and the occlusal plane angles by the upper margin of the articulator, and to ind the contributing factors to the difference of occlusal angles. for this study, 39 young adults (20 men, 19 women) were selected who had normal occlusion, no severe attrition, no missing tooth, not been under orthodontic treatment and occlusal equilibration and no temporomandibular disorders. The maxillary casts were mounted with Hanau 159-1 ear piece type face-bow and measured the occlusal plane angle with prototype occlusal plane projector. The following results were obtained; 1. The mean value of the ear rod F-H plane occlusal angle was 14.75˚, articulator occlusal angle was 9.26˚ and strong positive correlation between these angles, 2. It was almost same angle between the ear rod F-H plane angle (14.75˚) and the beyron point to infraorbital rim-6mm. occlusal angle (14.46˚) 3. The mean distance from the ear rod porion to the Byron point was 5.67mm. 4. It was no significant correlation between the distances Po-Beyron point, Or-infraorbital rim and articulator occlusal angle.
Almost every day close passage or near miss events happens in south part of Istanbul Strait between the vessel runs in the local area and pass strait transit. The vessels run in the local area pass close bow or aft of transit vessel or come close and wait for transit vessel because of inexperienced or incompetent skipper or because of time limitation or failure in technical equipment or lack of technical equipment or old equipment. This close passages create profound dangers for the surroundings. By the this research has been aimed to point out mentioned dangers by the concrete as number. For this purpose has been utilized JMS Ship Handling Simulator which has been settled in ITU Maritime Faculty and Environmental Stress Model which has been built up and improved in Inoue Laboratory. Has been put in the senarios which been played during simulation implementations transferred to the numerical risk occured during passage of South Part of Istanbul Strait by the Environmental Stress Model . Thus so, the riskwhich Istanbul Strait face everyday has been expressed as numerical and concrete.
The deletion of the distal long arm of chromosome 1 is associated with a characteristic facial appearance and a pattern of associated malformations. Characteristic manifestations include a round face with prominent 'cupid's bow' and downturned corners of the mouth, thin vermilion borders of lips, a long upper lip with a smooth philtrum, a short and broad nose, epicanthal folds, apparently low-set ears, micrognathia, microcephaly, abnormal hands and feet, variable cardiac or genital anomalies, moderate to severe mental retardation, and growth retardation. Using fluorescent in situ hybridization (FISH) analysis to map precisely the deletion, we present a case of chromosome 1q44 deletion with craniofacial characteristics, multiple congenital anomalies, and growth and psychomotor retardation. In comparison with other reported cases of 1q43-44 deletion, the subject does not show hydrocephalus, seizure, syn- or polydactyly of hands, and a urogenital anomaly. However, an arachnoid cyst, pinpoint dimple on the midline of the forehead, a right-sided supernumerary nipple and auricular pit, polydactyly of the right foot, adducted thumb, and flexion restriction of the proximal interphalangeal joint with a simian line in both hands were observed additionally.
The purpose of this study is to evaluate suitable anterior reference point similar to esthetic reference plane of the patient while transferring the suitable facebow. So those who live in Pusan with the normal occlusal relationship were chosen as subjects. The esthetic reference planes determined by the participants themselves and the superior reference line (anterior reference point) in Hanau & Denar articulator were compared with F-H plane in the standard lateral cephalogram. The results were as follows. 1. The angle between the esthetic reference plane and F-H plane was $2.81{\pm}5.7^{\circ}$. 2. The reference line, 43mm from Beyron point to the edge of the upper incisor, was the reference plane that had the closest paralleled relationship with the esthetic reference plane. 3. Transferring with ear piece type face-bow, the anterior reference point that showed the esthetic reference plane was 17mm below orbitale or 43mm above, the edge of the upper incisor.
발파 시 자유면의 이동은 대상암반의 역학적 특성 및 발파조건, 특히 암반의 불연속면 특성과 폭약의 종류, 장약량, 저항선, 공간격, 공간 또는 열간 기폭시차 및 전색상태 등 여러 가지 변수들에 의해 달라지며, 이는 발파진동의 크기, 폭음 및 파쇄도에 커다란 영향을 미친다. 현재 국내 노천발파 현장의 발파설계는 대부분 인접 보안물건에 대한 안전성을 최우선으로 하고 있으나 대규모 발파가 이루어지는 노천현장에서는 발파 시 자유면의 이동을 분석하여 진동을 제어하고 파쇄도를 향상시키기 위한 최적 조건의 발파 설계를 하는 것은 매우 중요하다. 고속 디지털 동영상 분석을 통하여 발파 후 최초 자유면 암반의 움직임, 전색의 적정성, 발파암의 이동 궤적, 발파암의 이동방향과 속도, 최적의 기폭시스템 분석이 가능하다. 외국에서는 이와 같은 방법이 발파설계 및 평가를 위한 유용한 도구로 활용되고 있으나 국내에서는 그 연구가 미미하다. 따라서 본 연구는 디지털 고속 동영상 분석에 의한 최적 발파설계 및 평가에 대한 기초적인 연구를 수행하였다. 셰일과 화강암으로 구성된 대규모 노천 발파현장 2개소에서 Emulsion과 ANFO 두 종류 폭약에 대한 암반 파쇄과정을 촬영한 디지털 고속동영상을 분석하여 자유면 암반의 변위, 이동속도 등을 분석하고 2차원 유한요소 해석 프로그램인 AUTODYN을 사용하여 폭약의 폭굉압력, 폭굉 전달시간, 발파 후 최초로 암반에 변위가 발생되는 반응시간, 발파 후 자유면 암반의 이동형상에 대한 수치해석을 수행하였다. 수치해석 및 디지털 고속 동영상을 분석한 결과, 암반의 종류에 관계없이 발파공 전면 자유면 암반의 이동형상은 주상 장약부의 중간 부근에서 변위 및 이동속도가 가장 크게 발생되어 가운데 부분이 활처럼 휘어진 형상을 나타내었다. 폭약의 폭굉압력, 폭굉 전달시간, 발파 후 최초로 자유면 암반에 변위가 발생되는 반응시간의 경우 Emulsion 폭약이 ANFO보다 폭굉압력 및 폭속이 크고 초기 변위 반응시간이 빠르게 진행되는 것으로 분석되었다.
The aim of this study is to establish anatomical dimension of the lip in young population in Korean, using specially designed soft ware with photographic image. We measure 13 anatomical dimensions of lips in 2,229 young people. (917 male, 1312 female, Aged from 18-33 years. Average age 19.7). Statistical analysis of these measurements of large population could offer useful information in facial plastic surgery. The mean measurements are as follows 1. Lengths (male/female) Widths of philtrum: $1.11{\pm}0.19cm/1.02{\pm}0.21cm$ Heights of philtrum: $1.6{\pm}0.24cm/1.47{\pm}0.21cm$ Heights of cupid bow: $0.88{\pm}0.16cm/0.83{\pm}0.16cm$ Height of upper vermilion: $0.74{\pm}0.16cm/0.70{\pm}0.15cm$ Height of lower vermilion: $1.08{\pm}0.17cm/1.02{\pm}0.15cm$ Height of upper lip(Rt.): $1.24{\pm}0.2cm/1.23{\pm}0.2cm$ Height of upper lip(Lt.): $1.24{\pm}0.2cm/1.17{\pm}0.19cm$ Half horizontal length of lip: $2.2{\pm}0.26cm/2.11{\pm}0.2cm$ Horizontal length of lip: $4.41{\pm}0.4cm/4.25{\pm}0.36cm$ Height of lower face: $7.1{\pm}0.58cm/6.52{\pm}0.6cm$ 2. Angles Nasolabial angle: $97.77{\pm}11.97^{\circ}/95.5{\pm}11.34^{\circ}$ Mentolabial angle: $133.88{\pm}14.65^{\circ}/129.27{\pm}13.67^{\circ}$ Angle of Cupid's bow: $111.65{\pm}13.99^{\circ}/116.75{\pm}16.2^{\circ}$ Previous reported photogrammetric measurements was difficult to implement to surgical practice. Because these were printed photographies of the same size. Therefore, in this study, we can measure a lot of objects and items more conveniently and correctly by using proportional program on computer after taking a digital photograph. Consequently, proportional measurements with photogrammetry of lip could be useful and corrective substitute for anthropometrical measuring. These data could be useful reference for preoperative consultation, surgical planning and learning anatomical measurement of lips and adjacent structures.
본 연구는 통신사(通信使)가 임진왜란 이후 1607년부터 1811년까지 약 200여 년간 12번에 걸쳐 일본을 왕래하며 남긴 사행록(使行錄) 중 선설(船說)을 중심으로 10~12차 사행에 정사 기선의 구조를 조선기술사적 측면에서 보다 깊이 있게 밝혀보고자 하였다. 본연구 결과 10~12차사행의 기선은 크기는 『계미수사록』과 『증정교린지』를 근거로 상장(갑판)의 길이가 19파(把)반(半), 너비 6파 2척(尺)이고, 삼판 높이는 2파 1척임을 알 수 있었다. 구조는 사행록에 따라 다르게 기록되어 있지만 이들을 종합해 보면 본판·선수(비아:이물)·선미(고물)·삼판·멍에·가룡·신방·궁지·갑판·두 개의 돛대와 돛·구레짝·판옥·선미판옥·타루·파도막이·호롱·계단·난간·치·노·닻 등을 갖추고 있는 것을 알 수 있다. 또한 각 부재를 서로 이음하거나 각단을 올릴 때는 연결하는 결구 못은 피삭(皮槊), 나무못[정: 釘], 쇠못[철정: 鐵釘] 등을 사용한 것을 알 수 있다. 돛의 종류는 초둔(草芚)으로 만든 돛[석범:席帆]과 베로 만든 돛[포범:布帆]을 사용한 것을 알 수 있다. 따라서, 본 연구를 통해 10~12차 사행에 정사가 타고 간 기선은 조선의 권위와 위엄을 보이기 위해 조선통신사 선단 중 길이를 가장 크게 하고, 선고(船高)를 높게 제작하였으며, 뱃전 바깥으로 이동 통로를 만들고, 뱃전과 판옥 사이에서 노를 젓고, 뱃전 안쪽으로 판옥을 올려 방을 만들고, 판옥 위 사방에 난간을 두어 안정적이며 선형의 미를 한층 더 향상시켰다. 판옥 벽면에는 궁궐 단청과 화려하게 벽화를 그려 장식하였다. 뿐만 아니라 선수에 귀면(鬼面)과 선안(船眼)을 그려 항해의 안전을 도모한 것을 알 수 있다. 이처럼 사행록에 기록된 선설을 통해 정사 기선은 국가에서 제작하고 국제를 항해할 수 있도록 기능과 구조를 갖추고 있는 것을 알 수 있다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제34권6호
/
pp.628-634
/
2008
The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program '$V-Ceph^{TM}$'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.
The notion that the axis of the shaft of the articulator must coincide the patient's mandibular transverse axis tells us the importance of locating the axis precisely. When using kinematic axis to transfer a cast to an articulator, the anatomic asymmetry of the contralateral points will result in certain distortion when the axis transferred to an articulator where the mechanical axis produces symmetry. In this study, after locating the true hinge axis point with Denar hinge axis locator, the discrepancies between true hinge axis point and arbitrary hinge axis point that was 13mm anterior from the posterior margin of center of trangus to the outer canthus of eye were measured. And the discrepancies between left and right true hinge axis point in the superoinferior and anteroposterior directions were measured. For this study, 20 dental students who have no missing teeth and no difficulties of mandibular movement were selected. Upper and lower cast of subjects were mounted on Denar Mark II articulator uisng Denar Slidematic face-bow and centric relation record for the measurement of discrepancies between left and right true hinge axis points. The results obtained as follows. 1. The mean distance from the arbitrary hinge axis point to the true hinge axis point was as follows. Right: horizontal distance; 1.99mm, vertical distance; 2.12mm, linear distance; 3.36 mm. Left: horizontal distance; 1.39mm, vertical distance; 2.06mm, linear distance; 2.09mm. Total: horizontal distance; 1.69mm, vertical distance; 2.09mm linear distance; 3.06 mm. 2. The 87.5% of true hinge axis points were within 5mm of the arbitrary hinge axis point. 3. The mean discrepancies between the right and left hinge axis point were 2.92mm in superoinferior direction and 4.74mm in anteroposterior direction. 4. When transferring the axis to the articulator, anatomic asymmetry between right: and left axis point produces in dislocation of cast on the articulator, and undesirable shift in esthetic tooth position will be resulted.
The relationale for recording mandibular movement is to accurately adjust an articulator. Techniques to record mandibular movement include radiographic interpretation, extraoral tracing, and intraoral recording materials. This study was performed to compare the concylar guidance inclination and Bennett shift(immediate & progressive side shift)obtained by using an electronic pantograph, pantograph and wax interocclusal records in Korean. Ten adults who have normal occlusion and are free of TMJ dysfunction were selected and clutches were constructed. At first Pantronic survey was performed three times by using an kinematic hinge axis according to manufacturer's direction. Next pantographic survey was performed three times and the articulator was adjusted with each pantographic recording. And then maxillary cast was attached to the articulator with pantographic as a face-bow and the mandibular cast was mounted to the articulator with centric relation record. Three protrusive, three left lateral and three right lateral wax interocclusal records were taken on the subjects and the articulator was adjusted with each interocclusal record. Protrusive condylar inclination, lateral condylar inclination, immediate side shift and progressive side shift obtained by using electronic pantograph, pantograph and wax interocclusal record were compared and analized. The results were as follows; 1. The average left and right protrusive and orbiting condylar inclination($33.7^{\circ},\;37.1^{\circ},\;40.6^{\circ},\;43.5^{\circ}$) record with Pantronic was significantly greater than that recorded with other methods. 2. The average left and right protrusive and orbiting condylar inclination($24.8^{\circ},\;27.0^{\circ},\;31.4^{\circ},\;32.4^{\circ}$)recorded with wax interocclusal record was less than that of other methods. 3. The average left and right immediate side shift(0.57mm,0.44mm)recorded with wax interocclusal record was greater than that of other methods and the average left rigtht immmediate side shift(0.30mm,0.41mm)recorded with Pantronic was significantly greater than that recorded with pantograph(0.11mm,0.20mm). 4. The average variance of wax interocclusal was signivicantly higher than that of other methods.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.