• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.66-75
• /
• 1999

Weld bead quality in tailored blank(TB) is critically affected by edge preparation of sheets. The edge quality of prepared sheets for TB can be classified into straightness and the cross section quality of sheared plane such as a ratio of shear face, shear plane angle, etc. In order to have a good edg quality for butt-welding sheets, precision shearing will be recommended. In this paper, the feasibility of a conventional mechanical shearing as the edge preparation for tailored blanks is studyied. It reveals that fine shearing may not be the unique solution as it is generally accepted. To obtain the good shearing condition with a conventional mechanical shearing, experiments were carried out using Tahuchi method. The major parameters affecting a sheared contour are the clearance between upper blade and lower blade, and shear angle. The optimal shearing condition yields a very good straightness along the entire length of the cut, which gives a butt joint gap less than 10% of the base material thickness. The good cross section of sheared plane is also achieved in the optimal shearing condition such as a ratio of the shear face above 65%, a cross section's shear plane angle above 85%, little burr, which is providing finally good weld beads.

• Archives of Plastic Surgery
• /
• v.50 no.2
• /
• pp.171-176
• /
• 2023

Background Human bite wounds in emergency department need evaluation in regard of reconstruction. These are due to occlusive bite injuries over face. Most commonly, human bites over face involve ear and nose, and may lead to avulsion injury. Defects over nose can be reconstructed immediately after debridement or delayed till the wound heals and scar becomes supple. Thorough wash and lavage with broadspectrum antibiotic cover has utmost importance in preventing cartilage infection. Methods We report 20 cases of human bite injuries over nose who presented to us in emergency department between 2018 and 2020. At the time of presentation the wound was assessed for closure. If not possible, patient was planned for delayed reconstruction after 3 months. In case delayed reconstruction was planned, the skin and nasal mucosa were approximated at first presentation. The patients underwent paramedian forehead flap after recreation of defect with conchal cartilage graft. Second stage of flap detachment and insetting was done after 3 weeks. After three weeks of second stage, third stage of flap thinning was done. Patients were followed for 3-6 months and subjective satisfaction was noted. Results Nineteen patients underwent delayed staged reconstruction with paramedian forehead flap and one underwent primary wound closure. The flap survival was 100%. The patient satisfaction was excellent in most cases. Conclusion We recommend delayed reconstruction for human bite nasal injuries. For reconstruction, paramedian forehead flap with conchal cartilage graft, if required, provides excellent reconstructive option with good contour and color match and minimal donor site scar.

• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1501-1514
• /
• 2008

The face shape extracted by the depth values has different appearance as the most important facial information. The face images decomposed into frequency subband are signified personal features in detail. In this paper, we develop a method for recognizing the range face images by multiple frequency domains for each depth image using the modified fuzzy c-mean algorithm. For the proposed approach, the first step tries to find the nose tip that has a protrusion shape on the face from the extracted face area. And the second step takes into consideration of the orientated frontal posture to normalize. Multiple contour line areas which have a different shape for each person are extracted by the depth threshold values from the reference point, nose tip. And then, the frequency component extracted from the wavelet subband can be adopted as feature information for the authentication problems. The third step of approach concerns the application of eigenface to reduce the dimension. And the linear discriminant analysis (LDA) method to improve the classification ability between the similar features is adapted. In the last step, the individual classifiers using the modified fuzzy c-mean method based on the K-NN to initialize the membership degree is explained for extracted coefficient at each resolution level. In the experimental results, using the depth threshold value 60 (DT60) showed the highest recognition rate among the extracted regions, and the proposed classification method achieved 98.3% recognition rate, incase of fuzzy cluster.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.457-463
• /
• 1996

An esthetically pleasing result in denture service is dependent upon several consideration. Esthetic considerations for the edentulous patient include tooth size, shape, arrangement, positioning, gingival contour, age, sex, personality differences, and ethnic type. Especially, the form of anterior artificial teeth is an important factor on the esthetics. The selection of artificaial teeth requires understanding and knowledge on physical and biologic factors and has to meet the indivisul esthetics and functional needs of each patient. However, the selection of artificial teeth is based on the large degree of subjective judgement of the dentist, Therefore, this is one of the most unscientific processes. Many attempts have been made to find a guideline for the selection of artificial teeth. Temperamental theory by White and Hall utillized with the physical characteristics such as body size, body form, color of eyes and hair, and disposition. SPA theory by Frush and Fisher utilized with the basis of sex, personalities, and age of the indivisual. There has not been provided for a guideline and study on the selection of artificial teeth for Koreans yet. This study was aimed to evaluate the William's typal matching theory in Koreans. 1. The facial forms of korean adult were ovoid(46.3%), square(36.7%) and tapered(17.0%) form. 2. The anatomic forms of natural maxillary incisors were ovoid(45.3%), tapered(31.3%), square(23.3%) form. 3. The forms of face and natural maxillary incisors were ovoid(21.9%), squared(11%), tapered(6.3%). 4. The natural maxillary incisors were similar in form to the facial form only in 39%. There was no correlation between the form of the face and the form of natural maxillary central inisors in Koreans. 5. Artificaial teeth which was selected according to the typal matching theory did not represent the form of the natural teeth in 61 per cents of the fatal, but it felt that they harmonized with the form of the patient's face and produced good results.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1044-1049
• /
• 2006

얼굴 추적은 Vision base HCI의 핵심인 얼굴인식, 표정인식 그리고 Gesture recognition등의 다른 여러 기술을 지원하는 중요한 기술이다. 이런 얼굴 추적기술에는 영상(Image)의 Color또는 Contour등의 불변하는 특징들을 사용 하거나 템플릿(template)또는 형태(appearance)를 사용하는 방법 등이 있는데 이런 방법들은 조명환경이나 주위 배경등의 외부 환경에 민감하게 반응함으로 해서 다양한 환경에 사용할 수 없을 뿐더러 얼굴영상만을 정확하게 추출하기도 쉽지 않은 실정이다. 이에 본 논문에서는 deformable한 model을 사용하여 model과 유사한 shape과 appearance를 찾아 내는 AAM(Active Appearance Model)을 사용하는 얼굴 추적 시스템을 제안하고자 한다. 제안된 시스템에는 기존의 Combined AAM이 아닌 Independent AAM을 사용하였고 또한 Fitting Algorithm에 Inverse Compositional Image Alignment를 사용하여 Fitting 속도를 향상 시켰다. AAM Model을 만들기 위한 Train set은 150장의 4가지 형태에 얼굴을 담고 있는 Gray-scale 영상을 사용 하였다. Shape Model은 각 영상마다 직접 표기한 47개의 Vertex를 Trianglize함으로서 생성되는 71개의 Triangles을 하나의 Mesh로 구성하여 생성 하였고, Appearance Model은 Shape 안쪽의 모든 픽셀을 사용해서 생성하였다. 시스템의 성능 평가는 Fitting후 Shape 좌표의 정확도를 측정 함으로서 평가 하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1867_1868
• /
• 2009

본 논문에서는 다양한 조명 조건 및 배경 조건하에서도 정확하게 얼굴의 윤곽선 영역을 검출하기 위한 방법을 제안한다. 입력영상은 조명 조건과 배경 조건에 따라 색상 분포나 에지의 분포가 다르기 때문에 정확한 윤곽선 검출을 위해서는 입력 영상 마다 얼굴 윤곽선을 검출하기 위한 기준을 설정하여야 한다. 이를 위해 입력 영상의 히스토그램을 분석하여 얼굴 후보 영역을 추출하기 위한 임계값을 계산하고 이들의 임계값을 사용하여 얼굴 윤곽선 영역을 검출하였다. 그 결과 제안된 방법은 기존의 방법 보다 뛰어난 성능으로 얼굴 윤곽선을 검출함을 보여 주었다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.04a
• /
• pp.221-224
• /
• 2004

본 논문에서는 웹 카메라로 촬영된 받아진 입력영상에서 사람의 얼굴을 검출하고 검출된 얼굴을 기반으로 사람 얼굴 아바타를 생성하는 방법에 대하여 다루고 있다. 일반적으로 웹 카메라를 통해 얻은 영상은 해상도가 떨어질 뿐만 아니라 끊임없는 조명의 변화와 복잡한 배경이 존재하여 얼굴을 검출함에 있어 어려움을 준다. 따라서 몇몇의 특징 점에 의존하는 방법으로 사람얼굴의 윤곽선을 찾는다는 것은 큰 어려옴을 겪게 된다. 본 논문에서는 이런 방법들의 결점을 극복하기 위한 새로운 방법을 제안한다. 먼저 칼라정보를 이용하여 실험을 통하여 통계적으로 표준피부색을 정의하여 얼굴의 대략적인 위치와 크기를 얻은 다음으로 B-spline Snake를 이용하여 사람 얼굴의 윤곽선을 정확히 추출할 수 있다.

• The Journal of the Korean dental association
• /
• v.57 no.6
• /
• pp.333-343
• /
• 2019

Many orthodontists face difficulties in aligning incisors in an esthetically critical position, because the individual perception of beauty fluctuates with time and trend. Temporary anchorage device (TAD) can aid in attaining this critical incisor position, which determines an attractive smile, the amount of incisor display, and lip contour. Borderline cases can be treated without extraction and the capricious minds of patients can be satisfied with regard to the incisor position through whole dentition distalization using TAD. Mild to moderate bimaxillary protrusion cases can be treated with TAD-driven en masse retraction without premolar extraction. Patients with Angle's Class III malocclusion can be the biggest beneficiaries because both sufficient maxillary incisal display, through intrusion of mandibular incisors, and distalization of the mandibular dentition are successfully achieved. In addition, TAD can be used to correct various other malocclusions, such as canting of the occlusal plane and dental/alveolus asymmetry.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.4
• /
• pp.93-101
• /
• 2004

A face boundary can be approximated by an ellipse with five-dimensional parameters. This property allows an ellipse detection algorithm to be adapted to detecting faces. However, the construction of a huge five-dimensional parameter space for a Hough transform is quite unpractical. Accordingly, we Propose a selectively attentional Hough transform method for detecting faces from a symmetric contour in an image. The idea is based on the use of a constant aspect ratio for a face, gradient information, and scan-line-based orientation decomposition, thereby allowing a 5-dimensional problem to be decomposed into a two-dimensional one to compute a center with a specific orientation and an one-dimensional one to estimate a short axis. In addition, a two-point selection constraint using geometric and gradient information is also employed to increase the speed and cope with a cluttered background. After detecting candidate face regions using the proposed Hough transform, a multi-layer perceptron verifier is adopted to reject false positives. The proposed method was found to be relatively fast and promising.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.2
• /
• pp.132-140
• /
• 2010

Purpose: The aim of this study is to identify the usefulness of unilateral mandibular angle ostectomy, so-called "Lateral Angle Reduction", in asymmetric prognathism patients by the assessment of postoperative stability and esthetic results Patients and methods: For the retrospective study, 10 skeletal class III mandibular asymmetry patients who were performed SSRO and unilateral mandibular angle ostectomy, Lateral Angle Reduction, was selected. Lateral and posterioanterior cephalogram was taken before surgery (T0), 1day after surgery (T1) and 6month after surgery (T2). To know the esthetic results the facial width and lateral facial contour were examined on posterioanterior cephalogram and to know the postoperative stability B point and Incisor inferius was examined on lateral cephalogram. Statistical analysis was performed. Results: From T0 to T1, Intergonial width was significantly decreased, dominantly at shortened side but no significant changes at lengthened side. Those were well-maintained during 6 months. Lateral facial angle and Ramus angle was significantly decreased on only shortened side from T0 to T1. As a result, after surgery, there were no significant differences in all measurements between shortened side and lengthened side. Ramus deviation angle in shortened side and ramus angle in lengthened side which reflect the angulation of ramus on frontal plane didn't show significant changes after surgery and during postsurgical periods. Lower dental midline showed no statistical changes during postsurgical period. The relapse rate on B-point was 11.92%. Conclusion: Unilateral "Lateral angle reduction" in the asymmetric mandible is valuable to obtain the narrow lower face and symmetric facial contour with a good stability.