• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.3
• /
• pp.15-21
• /
• 2009

The anisotropic mechanical properties were measured for the three orthogonal orientations of plain weave glass fabric reinforced epoxy resin laminate. In tensile and flexural tests, axial and edge type specimens failed by pull-out of warp and fill yarns, respectively. In contrast, the thickness type specimens failed by adhesive failure process. Longitudinal cracking occurred in several of the edge type specimens during tensile test. That cracking caused pop-in in the stress-strain curve. Defects induced by improper coupon machining caused that cracking.

• Macromolecular Research
• /
• v.10 no.4
• /
• pp.194-203
• /
• 2002

In resin infusion process(RIP), the fiber and the resin are in contact with each other for an impregnation step and often results in flow-induced defects such as poor fiber wetting and void formation. Resin flow characteristics in transverse direction and process modeling for woven fabric were studied, and the process modeling was applied to the manufacturing of hybrid composite materials. This study also considered the compressibility of woven fabrics in a series of compression force, and it was fitted well to an elastic model equation. Void formation was varied with the processing conditions in the stage of manufacturing composites using RIP. It was concluded from this study that proper combination of pressure build-up and dynamic heating condition makes important factor for flow-induced composite processing.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.5
• /
• pp.235-240
• /
• 2000

A low cost lighting system for line-scan cameras has been developed with 3-phase power. When exposure time of line-scan camera is shorter than fluctuation period of illumination, the average gray value of each acquired 1-D image varies. Detecting defects on the objects's surface under such illuminating environment is very difficult. The proposed lighting system is composed of low-cost fluorescent lights based on 3-phase power. The specially designed lighting pack and the properly selected lighting position enable to get the rippleless lighting. The principle of the proposed lighting system has been explained analytically. The lighting system has been tested for fabric inspection with line-scan camera and it's efficacy has been proved.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.122-130
• /
• 2017

In the direct digital textile printing process, the pre-treatment process is an essential condition for products by forming a clear pattern by sticking and penetration of DTP dye without spreading on the fabric. Recently, pre-treatment agent is changing from high viscosity to low viscosity in order to reduce defects of fabric during pre-treatment process. In this study, pre-treatment agent of acrylic polymer with low viscosity(less than 50cps) was prepared according to the solid content of the polymer, pre-treated on the cotton fabric, and direct DTP printing was performed to compare the color and sharpness. As a result, it showed high color at a viscosity of 50cps or less. When the solid content of the polyacrylic acid having a high molecular weight(A1) was 2.5wt%, when the solid content of the polyacrylic acid having a low molecular weight(A2) was 1 - 1.5wt%, the color was the best. And when the solid content of A1 and A2 was 1.5wt%, the degree of spreading was small and A1 was superior to A2 at the sharpness.

• Composites Research
• /
• v.33 no.2
• /
• pp.61-67
• /
• 2020

Preforming is crucial in resin transfer molding process using woven fabric. When shear deformation exceeds the locking angle, wrinkles are generated in the preform, which causes defects in the RTM process. Therefore, in this study, the allowable shear deformation limit of carbon fiber woven fabrics is quantified and the molding characteristics are verified using the actual fabric forming. As a result, the characteristics of creases according to the layer setups have been examined and the results have been discussed. Numerical analyses have been also performed using measured shear properties. These results have been compared with the experimental results.

• Textile Coloration and Finishing
• /
• v.8 no.1
• /
• pp.83-89
• /
• 1996

Carbon black has been used as a particulate soil to prepare artificial soiled fabrics for detergent study but it has two major defects. The one is the difficulty of quantitative analysis of carbon black for evaluate the detergency, the other is that there is no reliable correlation between the removal of carbon black and oily soil which is the major component of natural soil. In this study ferric oxinate was used as a particulate soil since it is in black color and can be soiled on fabric by suspension in water or by solution in chloroform and it is easily analysed quantitatively by extracting it from soiled fabric with chloroform to get correct value of soil removal. The characteristics of soil removal of ferric oxinate were compared with that of carbon black and Sudan black, an oil soluble dye, which had been proved that it's detergency correlated with that of oily soil The soil removal of ferric oxinate and Sudan black estimated from quantitative analysis and from K/S value were in good agreement whereas the result calculated by simple reflectance was consistently low. The soil removal of ferric oxinate was exceeded from that of carbon black without regard to surfactants, Triton and Las, but the effect of washing conditions such as temperature and washing time on soil removal of both soils with different suffactants showed no considerable difference. Though the soil removal of Sudan black was little effected by the conditions, the soil removal in Triton exceeded considerably that of in Las, which is the characteristic of oily soil. Thus the soil removal of Sudan black was in good agreement with ferric oxinate in Triton, a non-ionic surfactant, and with carbon black in Las, an artionic surfactant. We concluded that ferric oxinate is a more realistic model particulate soil for artificial soiled cotton fabric washed with non-ionic surfactant than carbon black.

• Journal of Wind Energy
• /
• v.14 no.3
• /
• pp.83-90
• /
• 2023

The purpose of this study is to evaluate the inter-laminar fracture toughness characteristics of CFRP pultrusion spar cap materials reinforced with non-woven glass fabric. Test specimens were fabricated by the infusion technique. A non-woven glass fabric and artificial defects were embedded on the middle surface between two pultruded CFRP panels. Double cantilever beam (DCB) and End Notched Flexure (ENF) tests were performed according to ASTM standards. Fracture toughness and crack propagation characteristics were evaluated with load-displacement curves and delamination resistance curves (R-Curve). The fracture toughness results were calculated by compliance calibration (CC) method. The initiation and propagation values of Mode-I critical strain energy release rate value G_Ic were 1.357 kJ/m2 and 1.397 kJ/m2, respectively, and Mode-II critical strain energy release rate values G_IIc were 4.053 kJ/m2 for non-precracked test and 4.547 kJ/m2 for precracked test. It was found that the fracture toughness properties of the CFRP pultrusion spar-cap are influenced by the interface between the layers of CFRP and glass fiber non-woven.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.413-427
• /
• 2001

In this studs, we synthesized durable antistatic agents with acrylic monomers for preventing the electrification of static electricity which is one of defects of polyester fabrics. Also we synthesized quaternary ammonium salts which give antistatic property and crosslinking agents which make antistatic agents adhere to fiber. The treatment of synthesized antistatic agents on polyester fabric carried out at the condition of various concentrations, treatment times and temperatures. The antistatic property, handle characteristics and other properties of treated and untreated polyester fabrics were also investigated.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.55-55
• /
• 2001

In this study, we synthesized durable antistatic agents with acrylic monomers for preventing the electrification of static electricity which is one of defects of polyester fabrics. Also we synthesized quaternary ammonium salts which give antistatic property and crosslinking agents which make antistatic agents adhere to fiber. The treatment of synthesized antistatic agents on polyester fabric carried out at the condition of various concentrations, treatment times and temperatures. The antistatic property, handle characteristics and other properties of treated and untreated polyester fabrics were also investigated.

• Science of Emotion and Sensibility
• /
• v.5 no.3
• /
• pp.61-66
• /
• 2002

Recently PET fabrics woven by high sensitive PET yams were used as a high sensitive clothing. Such high sensitive PET woven fabrics for clothing are passing through various processes, and are influenced by processing tension and heat, it makes the physical properties of PET yarns changing and makes the defects of PET fabric. Therefore many difficulties are faced to decide processing conditions for making high sensitive PET fabric. But few research related to the processing conditions of PET yarns and issue point for producing high sensitive clothing was only performed. In this study, POY and SDY of PET manufactured in seven filament manufacturing companies are selected, and their physical properties in each layers of filament cake divided by 50000m are measured and analyzed. Especially, wet and dry shrinkages according to the various wet and dry heat temperatures are analyzed for supplying basic physical data of PET yam and for enhancing PET yarn quality used for the high sensitive clothing.