• Korean journal of food and cookery science
• /
• v.27 no.6
• /
• pp.745-754
• /
• 2011

To improve the textural properties of gluten free rice flour based products, the physicochemical and pasting properties of extruded non-waxy rice flours using extruder were investigated. The high yielding Tongil type rice variety, Hanarum was used. Hanarum rice flour was prepared by dry milling from soaked and dried rice grain. The operation conditions of twin screw extruder were 250 rpm of screw speed, $160^{\circ}C$ of barrel temperature, and 24, 27, and 30% of moisture content. Hanarum extruded rice flour (HERF) were lower in crude lipid and ash contents, but higher in crude protein than Hanarum rice flour (HRF). The color values of HERF showed significantly different (p<0.05) with different moisture contents. Water binding capacities, apparent amylose contents, and damaged starch of HERF were higher than those of HRF. Moisture contents affected water binding capacities of HERF. Solubility increased with increasing heating temperature and solubilities of HERF differed significantly (p<0.05). X-ray crystallinity was changed after extrusion cooking and that of HERF showed sharp peaks at $2{\theta}=18-20^{\circ}$. The pasting viscosities of HERF kept lower values (~ 10 RVU) constantly.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.404-412
• /
• 2011

The purpose of this study is to prepare extruded rice flours suitable for baking rice cookies. The extruded rice flours were prepared at 100 and 130$^{\circ}C$ temperature and 25 and 27% moisture content in a co-rotating twin screw extruder. The rice extrudates were dried at 100$^{\circ}C$ for 18 hr and subsequently ground into the fine flour. Characteristics of the extruded rice flours were examined by rapid visco analysis, hydration property analysis, differential scanning calorimetry (DSC), and in vitro digestion test. Water absorption, solubility, and swelling power of all extruded rice flours were higher than those of native rice flour. DSC analysis showed that native rice flour had a peak at about 65$^{\circ}C$ while all extruded rice flours did not show any peaks since they were already gelatinized during the extrusion proess. Viscosity of the extruded rice flours decreased with increasing temperature and lowering moisture content in the extrusion proess. The extruded rice flours prepared at 130$^{\circ}C$ exhibited lower viscosity than those prepared at 100$^{\circ}C$. The operating temperature of the extrusion proess was critical for the starch digestion in vitro. The extruded rice flours prepared at 130$^{\circ}C$ showed a rapid decrease in digestible starch content while an increased level of slowly digestible starch content was observed compared to those treated at 100$^{\circ}C$ in the extruder. Cookies were prepared with a mixture of wheat flour and extruded rice flours at the ratio of 7 to 3. The cookies made with the extruded rice flours had lower spread factor and darker yellow color than those prepared with wheat flour only. Hardness of the extruded rice flour-added cookies was similar to that of the wheat flour cookie whereas their overall acceptance was better. Therefore the rice cookies partially supplemented with extruded rice flours may have a potential as early childhood foods which require soft texture and allergy reduction.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.45-49
• /
• 2001

This research was conducted to study the characteristics of the extruded products prepared from blends containing fixed amounts of frozen pollack (20%) and defatted soy flour (5%) and varying amounts of rice and corn flour using laboratory-scale single-screw extruder. Extrusion conditions were set at 27% feed moisture, $160^{\circ}C$ process temperature and 170 rpm screw speed. Results showed that there was almost no difference in proximate compositions among all extruded products. The product made from 100% rice flour had the highest expansion ratio, the lowest bulk density and the lowest shear force (P<0.05). Also, this product was the highest in L value and had the highest preference in sensory evaluation. Consequently, the addition of frozen pollack and defatted soy flour to rice flour could make desirable expanded extruded products. This study will form the basis for future development of rice snacks containing frozen pollack.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.813-820
• /
• 2012

To develop the high quality gluten-free rice products with health functionality and desirable texture with moistness, the physicochemical properties of extruded rice flours prepared from the mixture of germinated brown and white rices were investigated. The domestic organic Samgwangbyeo was used to make white and germinated brown rices. White rice (WR) was dried after soaked for 6 h at $15{\pm}3^{\circ}C$ and mixed with germinated brown rice (GBR) with different mixing ratios (100:0, 75:25, 50:50, 25:75, 0:100). The operating conditions of twin screw extruder were 250 rpm of screw speed, $120^{\circ}C$ of barrel temperature, and 25% moisture content of rice flour. The ash, crude protein and crude lipid contents were significantly different (p<0.05) and those of extruded GBR were the highest values, but those of extruded WR were the lowest. The color difference of extruded WR based on white plate showed the lowest among them. The water binding capacity (334.16%), swelling power (8.83 g/g), solubility (33.13%), and total starch (79.50%) were the lowest in extruded GBR. The viscosities of all extruded rice flours by RVA were maintained during heating. The peak and total setback viscosities of extruded rice flours ranged 127-352 and 58.0-85.5 cP, respectively. The novel food biomaterial from germinated brown rice as well as white rice was developed by twin screw extruder. The extruded rice flours control the moistness to improve the texture and also have functional materials, dietary fiber, GABA, and ferulic acid, etc to increase quality of gluten free rice products.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.850-854
• /
• 2012

This study is carried out in order to develop food materials for the promotion of rice consumption. In this study, we researched the physicochemical properties of extruded rice flour (ER) and gelatinization popped rice flour (GPR) by the extrusion process and by the popped method with milled rice and brown rice. The extrusion process used a couple of screw extruders. The extrusion parameter was kept constant at a feed moisture content of 25%, barrel temperature of $120^{\circ}C$ and screw speed of 400 rpm. GPR was prepared by batch popping machine after gelatinization of rice. In order to evaluate the physicochemical properties of ER and GPR, as well as the gelatinization rate, water soluble index (WSI), water adsorption index (WAI), DPPH radical scavenging activity and total dietary fiber content, the color value was carried out. The gelatinization rate was similar to 71.1~73.8%. Further, the results of WSI and WAI were increased at ER and GPR compared to the raw materials; ER was also higher than GPR. DPPH radical scavenging activity and total dietary fiber content showed a tendency to reduce after extrution and popping. As a result of the color value, the L value of ER decreased more than the raw materials, whereas GPR increased at a and b values.

• Preventive Nutrition and Food Science
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2011

Functional foods play an important role in daily diet, human health and the food industry. Hemp was reported to have many advantages for nutritional and medicinal usage. In this study, extruded hemp-rice (EHR) flour, containing 30% hemp, was mixed with the wheat flour to create bread loaves at the concentrations of 5, 10 and 15%. Bread made from 100% wheat flour (with no added EHR flour) was used as a control. The physical parameters, including expansion ratio, specific volume and crust/crumb color were evaluated separately. In addition, changes in hardness of the bread during storage at ambient temperature for 3 days were also studied. The results showed that 10%-EHR bread exhibited the highest hardness value, while 15%-EHR bread presented the lowest. The bread containing EHR flour had lower specific volume and bigger air cells compared to the control. Moreover, the crust and crumb color of EHR-containing bread was significantly darker than those of the control. In this study, the 15%-EHR bread showed higher specific volume, lower hardness and bigger air cell structures.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1603-1610
• /
• 2012

The effects of moisture content on the physical properties of cereal extrudates were investigated. Cereal flours (rice, wheat, corn, barley, and oat) were extruded at a barrel temperature of $130^{\circ}C$, feed rate of 120 g/min, and various moisture contents (20, 22.5, 25, 27.5, and 30%). Proximate content, expansion index, specific length, bulk density, breaking strength, apparent elastic modulus, water absorption index (WAI), water solubility index (WSI), specific mechanical energy (SME) input, paste viscosity, and color values were analyzed. Expansion ratio of extruded corn flour was higher than that of other extrudates at low moisture content. Bulk density, specific length, and elastic modulus in all cereals decreased with an increase in moisture content. The WAI increased with an increase in moisture content, whereas WSI decreased. SME input of extruded corn flour was higher than those of other cereal flours at lower moisture content, whereas that of oat flour extrudate was lower than those of other cereals at higher moisture content. Lightness of extruded rice flour was lighter than those of other cereals while that of extruded barley flour was darker.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1823-1829
• /
• 2012

Rice noodles are popular worldwide; however, no standard procedure is available for screening the potential for rice flour to make good quality noodles. This study reports two standard laboratory-scale procedures for preparing flat (sheet type) and extruded noodles. Eight rice cultivars were examined and the cooking loss and tensile strength of cooked noodles were determined. It was relatively easy to control the amount of water added to extruded noodles, whereas flat noodles were very sensitive to the amount of water used. Sheet formation was determined based on the amount of moisture content during preparation, and the Chenmaai cultivar was found to be most appropriate for both noodles making procedures and cooking and textural properties. Finally, good noodle making cultivar such as Chenmaai was less likely to be affected by the milling method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1760-1766
• /
• 2009

Physical properties of Yukwa base extruded with glutinous rice flour, rice flour, defatted soy flour, and salt using an twin-screw extruder were investigated. The ingredients were extruded at various moisture contents (16-18%), screw speeds (300 & 400 rpm) at 43.4 kg/hr feed rate. Length and specific volume of Yukwa base increased with decreasing moisture contents. Hunter's color L* values of Yukwa base was higher whereas $a^*\;and\;b^*$ values were lower with increasing moisture content. Water absorption index of Yukwa base increased with increasing moisture contents. X-ray diffraction of Yukwa base showed B type moisture content of 16% and 17% while it showed A type moisture content of 18%. Degree of crystallinity and breaking strength of Yukwa base were the lowest in the moisture content of 16% while the lowest value for hardness was found in the moisture content of 16% and of 17% with screw speed 400 rpm for all samples. In the microstructure of cross section of Yukwa base, air cell size was larger and cell wall was thicker as moisture content increased. The sensory evaluation of the Yukwa base showed that color and flavor were not significantly different among samples, while taste, appearance, mouth feel, and overall preference were higher as moisture contents decreased.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.55-59
• /
• 2001

Pressure-puffing system or extruder has been used to puff rice kernel or rice flour. Most of the study on rice puffing were the effect of process conditions such as moisture content and heating temperature on physical and chemical characteristics of popped rice. The study on mechanism and development of instant puffed rice like popcorn has been limited. Extruded waxy rice pellets were puffed in a microwave oven after drying and conditioning. Extruded pellets were formed with extrusion conditions of $20{\sim}27%$ moisture content, 2.76 MPa $CO_2$ gas injection pressure and 200 rpm screw speed. Under these conditions, puffed waxy rice pellets in microwave oven had low density and soft texture. Density and texture of puffed waxy rice pellet could be optimized by control of moisture content, $CO_2$ gas injection pressure and screw speed that affect significantly when puffing extruded waxy rice pellet.