• 소성∙가공
• /
• 제28권5호
• /
• pp.275-280
• /
• 2019

The aim of this study is to fabricate an ultra-fine pure rhodium wire using multi-pass wire drawing process. To manufacture $30{\mu}m$ ultra-fine rhodium wire from the initial $50{\mu}m$ wire, a multi-pass wire drawing process was designed based on the uniform reduction ratio theory. The elastic-plastic finite element analysis was then conducted to validate the efficacy of the designed process. The drawing load, drawing stress, and the distribution of the effective strain were evaluated using the finite element analysis. Finally, the wire drawing experiment was performed to validate the designed wire drawing process. From the results of the experiment, the diameter of the final drawn wire was found to be $29.85{\mu}m$.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.830-835
• /
• 2018

The tubular link chain conveyor works under very extreme conditions such as high tensile load, friction, and dangerous operating environments. In this study, we propose an optimal design plan for reducing cost and improving performance through weight reduction of tubular link chain conveyors for sludge transport. For light weight of tubular link chain conveyor, the optimization software using SHERPA algorithms, HEEDS was used in conjunction with ANSYS Mechanical V14.5, which is widely used in structural analysis, to achieve optimal tubular link chain. Through the optimization process, 19% light weight was achieved.

• 한국공간구조학회논문집
• /
• 제23권3호
• /
• pp.45-55
• /
• 2023

The purpose of this study has a purpose to evaluate shear ability, ductility and energy dissertation of specimens that is to be applied to jacket using wrapping method. The experiments was conducted as a condition that simultaneously applied axial load and transverse force. The results of experiments represent story-displacement ratio, the stiffness, energy dissertation, plastic rotation which mean seismic resistance ablity on structure. And It represents the form of crack ditribution and failure in extreme stages. Based on the results of this experiment, Design examples are given to show the performance evaluation for the column reinforcing of old school buildings using nonlinear analysis is going to be conducted. Therefore, it is possible to apply the seismic retrofit method to public facilities.

• 항공우주시스템공학회지
• /
• 제12권3호
• /
• pp.38-44
• /
• 2018

군용항공기는 다양한 임무의 수행을 통한 비행시간 누적과 예상 불가능한 외기 환경에 의한 복합적인 요인으로 구조적으로 취약한 부위에서 피로균열이 발생할 수 있다. 피로 균열은 점차 진전되어 극심한 경우 해당 구조가 파괴될 위험이 있으며 이는 비행 안전성에 큰 영향을 미칠 수 있다. 본 논문에서는 항공기 주익과 동체의 연결부위를 보호하기 위해 장착한 페어링 내부의 지지대에서 주기검사 중 균열 현상을 개선하기 위한 일련의 품질개선에 관한 연구를 수행하였다. 균열의 원인파악을 위해 주익 조립 공정에 따른 예하중 발생 여부에 대해 조사하고 파단면 분석을 수행하였다. 또한, 균열의 재발방지를 위해 지지대의 설계를 개선하는 방안을 제시하였고, 응력 및 피로 수명해석을 통해 구조 건전성을 검증하였다.

• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.279-288
• /
• 2016

이 연구에서는 철근콘크리트(reinforced concrete, RC) 기둥의 휨 거동을 비교적 간단한 방법으로 평가하기 위해서 모멘트-곡률 관계를 단순화하였다. RC 기둥에서 주철근 배근을 이상화하고 힘의 평형조건 및 변형률 적합조건에 기반하여 초기 휨 균열 발생, 인장철근 항복 도달, 최대 내력 및 최대 내력 도달 후 최대 내력의 80% 시점에서의 내력과 중립축 깊이를 산정하였다. 기둥의 최대 내력 이후의 콘크리트 압축연단 변형률은 Kim et al의 구속된 콘크리트 응력-변형률 관계를 이용하여 산정하였다. 단순화된 모멘트-곡률 관계로부터 환산된 기둥의 횡하중-횡변위 관계는 다양한 변수하에서 수행한 기둥 실험결과와 잘 일치하였다. 고려된 각 단계에서의 모멘트와 중립축 깊이는 주철근 지수, 횡보강근 체적지수 및 축력 지수의 함수로 모델링하였다. 결국, 기둥의 곡률 연성은 콘크리트 압축강도 및 주철근과 횡보강근의 양과 함께 작용 축하중비에 중요한 영향을 받았다.

• 한국방재안전학회논문집
• /
• 제6권2호
• /
• pp.1-8
• /
• 2013

우리나라 전체 재해 60%이상인 태풍과 같은 바람재난으로부터 구조물이나 외장재가 안전과 사용성 측면에서 설계되려면 내풍설계과정에서 기본풍속, 설계속도압, 풍하중 등 많은 파라미터들이 요구된다. 본 논문에서는 최근 2003년부터 2012년까지의 10년 동안 년최대풍속이 발생한 날의 풍속으로부터 확률과정과 확률분포, 통계적 성질 등을 알아보기 위하여 8개의 대표지점을 여수, 인천, 서울, 청주, 원주, 대구, 속초, 울릉도로 선정했다. 선정된 각 지점에 대한 최근 10년 동안의 풍속자료는 기상청으로부터 획득했다. 각 지점의 획득한 풍속자료는 우리나라를 직접 통과하면서 영향을 미친 태풍과 통과는 안했지만 간접 영향을 미친 태풍, 년최대순간풍속과 년최대평균퐁속이 같은 날 등을 고려 90개의 앙상블 중 선별된 33개의 모집단에 대한 풍속자료의 확률과정 및 확률분포의 특성을 비교 검토하였다.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.572-579
• /
• 2011

We have examined the runoff characteristics of nonpoint source (NPS) in fields. Two monitoring sites were equipped with an automatic velocity meter and water sampler. Monitoring was conducted at fields 1 and field 2 during the rainfall event. Ten rainfall-runoff events were monitored and analyzed during the study period. The results show that runoff occurred if daily rainfall and intensity were higher than 40 mm and 1.6 mm/hr except a few extreme rainfall events with very high intensity. Runoff of field 1 was approximately twice of that of field 2. Event mean concentrations (EMC) and pollution load of analyzed water quality indices were also higher in field 2 than in field 1. Especially, TN load from field 2 was $75.4 mg/m^2$ and was about 5 times higher than that from field 1. Analysis of Pearson correlation coefficient of water quality parameter indicates that besides of TN all items in fields 1 have tight relationship respectively (p < 0.01). But those of fields 2 have a significant (p < 0.05). Estimating units loading of NPS, we suggested that variable such as soil texture, rainfall amount and intensity and slope were needed to be considered from agricultural landuses. The results of this study can be used as a basic data in the development and implementation of total maximum daily loads (TMDL) in Korea.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.375-391
• /
• 2022

This paper examined the impact of the cross-sectional structure on the structural results under different loading conditions of reinforced concrete (RC) members' management limited in Carbon Fiber Reinforced Polymers (CFRP). The mechanical properties of CFRC was investigated, then, totally 32 samples were examined. Test parameters included the cross-sectional shape as square, rectangular and circular with two various aspect rates and loading statues. The loading involved concentrated loading, eccentric loading with a ratio of 0.46 to 0.6 and pure bending. The results of the test revealed that the CFRP increased ductility and load during concentrated processing. A cross sectional shape from 23 to 44 percent was increased in load capacity and from 250 to 350 percent increase in axial deformation in rectangular and circular sections respectively, affecting greatly the accomplishment of load capacity and ductility of the concentrated members. Two Artificial Intelligence Models as Extreme Learning Machine (ELM) and Particle Swarm Optimization (PSO) were used to estimating the tensile and flexural strength of specimen. On the basis of the performance from RMSE and RSQR, C-Shape CFRC was greater tensile and flexural strength than any other FRP composite design. Because of the mechanical anchorage into the matrix, C-shaped CFRCC was noted to have greater fiber-matrix interfacial adhesive strength. However, with the increase of the aspect ratio and fiber volume fraction, the compressive strength of CFRCC was reduced. This possibly was due to the fact that during the blending of each fiber, the volume of air input was increased. In addition, by adding silica fumed to composites, the tensile and flexural strength of CFRCC is greatly improved.

• 한국임상수의학회지
• /
• 제40권4호
• /
• pp.268-275
• /
• 2023

In this paper, we designed 3D-printed orthopedic splint models for patient-specific external coaptation on fracture healing and analyzed the stability of the models through finite element method (FEM) analysis under compressive load conditions. Polylactic acid (PLA) and acrylonitrile-butadiene-styrene (ABS) based 3D splint models of the thicknesses 1, 3, 5 and 7 mm were designed, and Peak von Mises stress (PVMS) and maximum displacement (MD) of the models were analyzed by FEM under compressive loads of 50, 100, 150, and 200 N. The FEM results indicated that PVMS and MD values, regardless of material, had a negative correlation with the thickness of the models and a positive correlation with the compressive load. There was a risk of splint deformation under conditions more extreme than 100 N with 5 mm thickness. For successful clinical application of 3D-printed orthopedic splints in veterinary medicine, it is recommended that the splint should be produced not less than 5 mm thickness. Also, it is expected to be stable when the splint is applied to situations with a compressive load of 100 N or less. There is an advantage of overcoming the limitations of the existing bandage method through 3D-printing technology as well as verifying the stability through 3D modeling before application. Such 3D printing technology will be widely used in veterinary medicine and various fields as well as orthopedics.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권2호
• /
• pp.42-49
• /
• 2023

고정식 자켓구조물 설계 시 국내 설계법의 부재로 해외 설계기준을 적용하고 있다. 특히, 미국의 API기준을 주로 적용하고 있으나 API RP 2A는 허용응력설계법(WSD)과 하중저항계수법(LRFD)의 두 설계법을 제시하고 있고 설계자의 판단에 따라 적용하고 있는 실정이다. 본 연구에서는 국내 연안에 실제 설치된 고정식 해양구조물에 대해 해양구조물 전용프로그램인 SACS를 이용하여 두 설계법에 대한 응력비를 검토비교 하였다. 검토결과, 환경하중의 영향이 큰 극한하중해석과 운송해석 시에는 LRFD설계법이, 자중의 영향이 큰 평상시 하중해석과 선적 및 인양 시에는 WSD설계법이 더 큰 응력비를 보여주고 있어 기본설계 시 두 설계법에 대한 적용성 검토를 수행한 후 안전성과 경제성 등을 고려하여 최종 설계법을 선택하는 것이 적정하다고 판단된다.