• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.262-265
• /
• 1996

An ALT(accelerated life testing) method is to test a product in over-stressed conditions, and then the test result is extrapolated to an usual (normal stressed) condition. It is the major disadvantage of ALT method that the more extrapolation to an usual condition applies the bigger error is indispensable. Therefore a reliability model combining field failure data and laboratory test data is required in pratice. We propose several methods of estimating the failure rate of a product life which is assumed to follow an exponential distribution. Structural similarity and technological advances are also cosidered. Finally, We derive the acceleratio factor which can be used to predict the failure rate for a new product.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.209-213
• /
• 2003

It is advantage of accelerated vibration testing to compress service exposures to operating vibration into a reduced laboratory test by increasing the amplitude or frequency of the applied input excitations. This paper proposes an accelerated test method to estimate the high-cycle fatigue life under random excitation. The method consists of conducting a test with amplified input excitation and extrapolating linearly the lift in the accelerated condition into the real lift in field condition. The extrapolation is carried out applying the high-cycle irregular excitation fatigue theory including the rainflow counting, Miner’s damage accumulation rule, and Goodman’s mean stress correction. As a verification, those estimated lift is compared with that acquired by experiment f3r the simple case of spot welding specimen with good agreement. This testing procedure will provide an useful scheme that can reduce testing period associated with developing time schedule of new product.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.461-464
• /
• 2000

A branched crack in a semi-infinite plate under tension and bending moment is considered. Intensity factors of the stress and moment for the branched crack are evaluated. The stress intensity factors are obtained by using the finite element method and the J-based mutual integral. The moment intensity factors are calculated by extrapolating the values of the moment near the crack tip. Approximate expressions are also obtained as functions of the branched crack length and branching angle.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.391-394
• /
• 2006

In this paper, the thermal lattice Boltzmann method(TLBM) proposed by Guo et al.(2002) is applied to analyze the forced convective flow and heat transfer of 2-D micro channel. Nonequilibrium extrapolation boundary condition is adopted to simulate the velocity and temperature behavior at wall boundaries. Numerical results obtained by the present study give a good prediction of the micro fluidic characteristics with thermal effects.

• Journal of applied mathematics & informatics
• /
• 제4권1호
• /
• pp.17-30
• /
• 1997

In this work we approximate the solution of initialboun-dary value problem using a Galerkin-finite element method for the spatial discretization and Implicit Runge-Kutta method for the spatial discretization and implicit Runge-Kutta methods for the time stepping. To deal with the nonlinear term f(x, t, u), we introduce the well-known extrapolation sheme which was used widely to prove the convergence in $L_2$-norm. We present computational results showing that the optimal order of convergence arising under $L_2$-norm will be preserved in $L_{\infty}$-norm.

• 제어로봇시스템학회논문지
• /
• 제20권4호
• /
• pp.414-421
• /
• 2014

This paper presents a method of ballistic missile launch point estimation using phase division least squares. The proposed algorithm employs smoothing to enhance estimation accuracy and generates functions of time for total velocity, flight path angle and heading angle, allowing extrapolation to estimate the launch point. Performance of the proposed algorithm is tested in conjunction with the extended Kalman filter and the Kalman filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.505-505
• /
• 2000

Controlling the process by PID controller is widely used in industry by applying Ziegler-Nichols method in analyzing parameter of the controller. However, in fact. it is still necessary to tune parameter in order to obtain the best process response. This paper presents a Self-Tuning PID controller utilizes the personal computer to synthesize and analyze controller parameter as well as tune for appropriate parameter by using Dahlin method and Extrapolation. Experimental results using a Self-Tuning PID controller to control water level and temperature, it is found that the controller being developed is able to control the process very effectively and provides a good response similar to the controller used in the industry.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.380-385
• /
• 2000

In this study, geometric shape and crack in welded interface of the air cooled heat exchanger Fin-Tube of Dissimilar Meterials was analysed. The object of study is to understand the behavior of Stress Intensity Factor for fin length, flash thickness, flash length, symmetric and asymmetric cracks of comming from the manufacturing process. Stress Intensity Factor was analysed by BEM. Kelvin's solution was used as a fundamental solution in BEM analysis and stress extrapolation method was used to determine Stress Intensity Factor.

• 상하수도학회지
• /
• 제17권4호
• /
• pp.495-502
• /
• 2003

In order to modify incorrect flow data in the sewage system, the method using the stage-discharge relation and hydraulic characteristic curve of sewer pipe are applied. The modified data were verified with field measured data and the infiltration analysis using the modified data was carried out. When flowrate were measured using the flow-meter in fair weather, the stage data were comparatively consistent but velocity data were very poor for the most part. Therefore, it was recommended that sewage flowrate variation characteristic curve and infiltration were computed using the modified data on the basis of stage data. Especially, in the case of using the hydraulic characteristic curve, extrapolation results of the rainy season flowrate using regression curve on the basis of the data in fair weather were also reasonable.

• 한국군사과학기술학회지
• /
• 제5권2호
• /
• pp.50-61
• /
• 2002

In this study, 3-dimensional virtual visualization was performed for a rapid and accurate analysis of sea bottom topography, The visualization was done through the extracted data using the developed program and the generated data using the gridding method. The data extraction program was developed with AutoLISP programming language and this program was able to extract the needed sample bathymetry data from the electronic sea chart systematically as well as effectively. The gridded bathymetry data were generated by the interpolation or extrapolation method from the spatially-irregular sample data. As the result of realization for the 3-dimensional virtual visualization, it was shown a proper feasibility in the analysis of the sea bottom topography to determine the route of submarine cable burial.