• Journal of Microbiology and Biotechnology
• /
• v.25 no.11
• /
• pp.1936-1943
• /
• 2015

The present study developed an efficient and environmentally friendly method for recovering polyhydroxybutyrate (PHB) from Cupriavidus necator. Several non-halogenated solvents were tested and it was found that butyl acetate and ethyl acetate are powerful solvents for the biopolymer. Testing was performed to examine the effects of temperature (25℃ until temperature below solvent boiling points) and heating incubation time (0-60 min) on the two solvents. Butyl acetate had a higher recovery level (96%) and product purity (up to 99%) than ethyl acetate at 103℃ and a heating incubation time of 30 min. Under these conditions, PHB recorded the highest molecular weight of 1.4 × 10⁶ compared with the standard procedure (i.e., recovery using chloroform). The proposed strategy showed that butyl acetate is a good alternative to halogenated solvents such as chloroform for recovery of PHB.

• The Journal of Korean Medicine
• /
• v.30 no.6
• /
• pp.44-52
• /
• 2009

Objectives: This study was performed to evaluate the influence of different extracting solvents (water, methanol, ethanol, or n-hexane) on the anti-inflammatory efficacy of Scutellaria baicalensis (Lamiaceae), which has been used widely as a traditional herbal medicine for its anti-inflammatory properties. Methods: The ability of each extract to inhibit the production of pro-inflammatory mediators such as NO, TNF-$\alpha$, and $PGE_2$ by lipopolysaccharide (LPS)-stimulated mouse macrophage RAW 264.7 cells was measured. Results: The results showed that extraction solvents (except n-hexane) for S. baicalensis showed significant inhibitory effects on NO, TNF-$\alpha$ and $PGE_2$ production. Especially, methanol was the solvent with the greatest activity against NO and $PGE_2$ production. However, there was no difference between the extracts for inhibitory activity of TNF-$\alpha$. Conclusion: The present study suggests that methanol is a superior extraction solvent than water, ethanol, or n-hexane for maintaining the anti-inflammatory effects of S. baicalensis.

• Journal of Applied Biological Chemistry
• /
• v.55 no.3
• /
• pp.149-156
• /
• 2012

The effects of solvent type and concentration, solid/liquid ratio, extraction time and repeated extraction on recovery of keratinase from solid-state fermentation (SSF) of chicken feather by a local Streptomyces sp. NRC 13S were investigated in order to establish the experimental conditions for keratinase yield. Among solvents tested, 0.5% (v/v) glycerol was the best. Box-Behnken design was used to investigate the effect of relevant variables on keratinase recovery. The factors investigated were solid/liquid ratio (1:1.66-1:6.66 g/mL), glycerol concentration (0.5-5% v/v) and repeated extraction (1-5 cycle). The results showed that the maximum recovery of keratinase (6933.3 U/gfs) was obtained using 0.5 (v/v) glycerol as extracting solvent, in a solid/liquid ratio of 1:5 and three extraction cycles.

• Clean Technology
• /
• v.17 no.3
• /
• pp.266-272
• /
• 2011

Anchovy oil was extracted using supercritical carbon dioxide ($SCO_2$) and organic solvents. Extraction was carried out at temperature range from 40 to $60^{\circ}C$, and pressure range from 15 to 25 MPa. The flow rate of $CO_2$ (22 $gmin^{-1}$) was constant entire the extraction period of 1.5 h. The fatty acid composition of anchovy oil was analyzed by gas chromatography (GC). The main fatty acids of anchovy oil were myristic acid, palmitic acid, stearic acid, palmitoleic acid, EPA (eicosapentaenoic acid), and DHA (docosahexaenoic acid). In addition, the oil obtained by $SCO_2$ extraction contained a higher percentage of polyunsaturated fatty acids especially EPA and DHA comparing to the organic solvent extracted oil. The oxidative stability of oils extracted from Anchovy by $SCO_2$ extraction was compared to those extracted by organic solvents. Results showed that the storage periods of oils obtained by $SCO_2$ extraction were longer than those of organic solvents extraction.

• Journal of the Korean Ceramic Society
• /
• v.34 no.8
• /
• pp.817-824
• /
• 1997

Stabilization is a key stage in the production of advanced carbon/carbon composites (ACC) from mesophase pitch, to render the mesophase infusible and the prevention of puffing during the subsequent carbonization. It is generally known that stabilization process as well as properties of mesophase pitch has a great deal of influence on the properties of the resultant ACC. Hence, it is possible to infer the properties of ACC by examing the stabilized mesophase pitch. In this study, extractions by solvents or acidified solvents extraction were carried out from the A-240 petroleum pitch. The extracted pitches were made into mesophase by heat treatments. Oxidative stabilization by air and non-oxidative stabilization by a chemical free radical initiator were performed. When a soluble polymer is fully stabilized, it should become insoluble in solvents. This phenomenon was used to estimated the degree of stabilization. The non-oxygen stabilized mesophase pitch powder was compared with the air stabilized mesophase pitch powder. FTIR provided additional information on the functional groups.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.50-57
• /
• 2012

In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.123-131
• /
• 2006

This paper reports the apparatus and method for the safe treatment of pentachlorophenol(PCP)-treated ammunition box by solvent extraction. Experimental variables were chosen as the composition of solvents, types of substance(chips and sawdust), temperatures and sonication to obtain maximum PCP removal from wood samples of the dismantled ammunition box. Up to 99% of PCP in the wood chip was extracted within 2 hours at room temperature when using methanol as the solvent. The extraction volume ratio of methanol per dried sample was about 10. Type of samples, extraction temperature and sonification showed little effects on PCP extraction. Based on this study, a resource recycling system for the treatment of ammunition boxes was recommended.

• Korean journal of food and cookery science
• /
• v.23 no.1 s.97
• /
• pp.150-155
• /
• 2007

This work was conducted to obtain a rapid, accurate, and precise procedure for free amino acids analysis in Doenjang with HPLC-OPA (high performance liquid chromatography using-phthalaldehyde) and AAA (automatic amino acid analyzer) methods. Different sample extraction procedures among water, 0.1 M perchloric acid, and 0.1% meta-phosphoric acid were also compared. The optimal extraction solvent was 0.1% meta-phosphoric acid for both the HPLC-OPA and AAA methods. Good recoveries for glycine and methionine were observed using the 0.1% meta-phosphoric acid extraction with HPLC-OPA method. Method precisions (% relative standard deviation) for the free amino acids ranged for 1.62% to 8.27%, in which the HPLC-OPA method with water extraction showed the lowest value at 1.62%. Inhibition rates of the free amino acids in Doenjang were greatest with an addition of NaCI at a 1% concentration.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.11
• /
• pp.1101-1105
• /
• 2000

A simultaneous determination method of BTEX (benzene, toluene, ethylbenzene, o,m.p-xylene) and TPH (kerosene, diesel, jet fuel and bunker C) in soil with gas chromatography/flame ionization detection (GC-FID) was described. The effects of extracti on method, extraction solvent, solvent volume and extraction time on the extraction performance were studied. A sonication method was simpler and more efficient than Soxhlet or shaking methods. Sonication with 10 mL of acetone/methylene chloride (1 : 1, v/v) for 10 min was found to be optimal extraction conditions for 20 g of soil. Peak shapes and quantification of BTEX and TPH were excellent, with linear calibration curves over a wide range of 1-500 mg/L for BTEX and 10-5000 mg/L for TPH. Good reproducibilities by sonication were obtained, with the RSD values below 10%. By using about 20 g of soil, detection limits were 0.8 mg/L for BTEX and 10 mg/L for TPH. The advantages of this procedure are the use of simple and common equipment, reduced volumes of organic solvents, rapid extraction periods of less than 20 min, and simultaneous analysis of volatile and semivolatile compounds.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.301-304
• /
• 2019

Microwave was designed for lipid extraction from green algae (Spirulina platensis). Microalgae-solvent (various solvents) were extracted and heated using microwave at 600 W for around 40 min. The maximum yield obtained within this period was 12.530% of lipid compared to just 1.293% for Soxhlet extraction. Lipid analysis revealed that those with higher essential fatty acid content consist of saturated fatty acid (SAFA) and polyunsaturated fatty acid (PUFA) which could be used for biodiesel production.