• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.3
• /
• pp.494-499
• /
• 2004

This study was investigated the antimicrobial activity of clove extracts according to extraction solvents. The extracts were tested for their antimicrobial activity against several food spoilage microorganisms including Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Salmonella typhimurium and Pseudomonas aeruginosa. The methanol extract showed stronger antimicrobial activities than water extract. However, petroleum ether extract did not show antimicrobial activity. The water extract of clove showed growth inhibition effect against Escherichia coli, Salmonella typhimurium and Staphylococcus aureus, whereas no effect against Bacillus subtilis. The methanol extract of clove extracts showed more sensitive antimicrobial activity in Gram (+) bacteria than in Gram (-) bacteria. The antimicrobial activities were increased with increasing concentration of the clove extract.

• Korean Journal of Veterinary Service
• /
• v.27 no.1
• /
• pp.17-29
• /
• 2004

A multiresidual analysis was performed to determine 12 sulfonamides(sulfacetamide, sulfadiazine, sulfisomidine, sulfathiazole, sulfapyridine, sulfamerazine, sulfamethazine, sulfamonomethoxine, sulfisoxazole, sulfamethoxazole, sulfaquinoxaline, and sulfadimethoxine) in beef and pork simultaneously. The multiresidual analysis for the sulfonamides currently used was able to analyze 5 kinds of sulfonamides at the same time. The method of this 12 sulfonamides multiresidual analysis in this study was matrix solid-phase dispersion(MSPD) by high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LC/MS). The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM: Ethylacetate(3:1), DCM:EA(9:1). Also, samples (84 beef and 205 pork samples) which were positive by EEC-4 plate test from 2001 to 2003 were tested to investigate the kinds of sulfonamides using HPLC. The results from the study were as follows; 1. The recovery rate of the materials was measured by MSPD method with 3 different extraction solvents; Dichloromethane, DCM:Ethylacetate(3:1), DCM:EA(9:1). The method of extraction solvent with DCM:ethyl acetate(9:1) was the most excellent(87.7∼99.3%) in separation and reappearance. 2. In the LC/MS analysis. of sulfonamides, signal to noise ratio was showed relatively high in the positive mode and special ion in the quality analysis was determined via [M+H]$\^$+/ and m/z 156. A spectrum of sulfonamides was showed from all 12 sulfonamides. 3. The samples positive by the EEC-4 plate, a screening test method, were categorized by sulfonamides through Charm II and confirmed the kinds of sulfonamides through HPLC. 1) Among 84 beef samples positive by EEC-4 plate, 20 samples were positive by Charm II and identified as 7 sulfamethazine, 9 sulfadimethoxine, 1 sulfamonomethoxine and 3 unknown status. 2) Among 205 pork samples positive by EEC-4 plate, 42 samples were positive by Charm II and identified as 19 sulfamethazine, 1 sulfadimethoxine, 4 sulfamonomethoxine and 5 unknown status.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.802-808
• /
• 1996

Silicic acid(SA) was extracted with organic solvents from aqueous sodium silicate solutions acidified with dilute sulfuric acid. Tetrahydrofuran(THF), isopropyl alcohol and acetone were used as organic solvents. The extraction degree of Si and the removal efficiency of Na is determined according to kinds of solvent and the mixing ratios of solvent, sodium chloride and $H_2O$. Optimum conditions for the preparation of high purity SA were THF as an organic solvent, volume ratio of organic solvent/SA : 1 (organic solvent 10ml/10ml SA) and the amount of NaCl addition 2.5g/10ml SA. The extraction degree of Si and the removal efficiency of Na at that point were 86.2% and 99.95% respectively and the purity of SA was 99.96%.

• Journal of Pharmacopuncture
• /
• v.14 no.1
• /
• pp.71-78
• /
• 2011

Objective : This study was performed to compare anti-inflammation, anti-oxidation and anti-bacterial effects of Ligustici Rhizoma (LR) extracted with two kinds of solvents, ethanol and distilled water. Methods : It is prepared two kinds of LR extracts 20, 50, 100 ${\mu}l/mg$ by first. MTT assay way to measure cytotoxicity is formed in Raw 264.7 cell. The anti-inflammation effect is measured by ability to inhibit production of NO in Raw 264.7 cell. The anti-oxidation effect was measured by DPPH Radical scavenging ability in HaCaT cell. The anti-bacterial effect was measured by inhibition zone diameter on Propionibacterium acnes. Results : 1. LR (20 ${\mu}l/mg$) extracted with ethanol was showed 80% cytotoxicity, LR (50 ${\mu}l/mg$) extracted with ethanol and LR (20, 50 ${\mu}l/mg$) extracted with water were showed 70% cytotoxicity, LR (100 ${\mu}l/mg$) extracted with ethanol and LR (100 ${\mu}l/mg$) extracted with water were showed 60% cytotoxicity in Raw 264.7 cell. 2. LR (100 ${\mu}l/mg$) extracted with ethanol was showed more significantly inhibitory effect on NO production than the water extraction. 3. Two kinds of LR extraction groups did not show significantly scavenging effect of DPPH radicals. 4. Two kinds of LR extractions did not have a inhibitory effect on Propionibactrium acnes. Conclusion : Two kinds of LR extracts have not cytotoxicity, statistically significant ability to scavenge DPPH radicals and effect to inhibit Propionibactrium acnes. LR extracted with ethanol only have a little effect to inhibit NO production. This study proposes that LR extracted with ethanol is more effective in anti-inflammation.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.9
• /
• pp.1315-1322
• /
• 2006

The following study describes the gas chromatography-mass spectrometry (GC-MS) based screening and confirmation analysis of urinary androgenic steroids. Four commercially available solid-phase extraction (SPE) cartridges, Serdolit PAD-1, Sep-pak $C_{18}$, amino-propyl, and Oasis HLB, and three different extractive organic solvents, diethyl ether, methyl tert-butyl ether (MTBE), and n-pentane, were tested for sample preparation. Overall, Oasis HLB combined with MTBE extraction provided the highest recoveries in 39 of 46 total androgenic steroids examined and it showed a good extraction yield (>82.1%) for polar steroids, such as metabolites of fluoxymesterone, oxandrolone, and stanozolol, which gave a poor recovery in both n-pentane (9.2-64.3%) and diethyl ether (22.2-73.6%) extractions. All SPE sorbents tested showed potential, because they were efficient in extraction for most or selective steroids. When applied to positive urine samples based on the results obtained, the present method allowed selective and sensitive analysis for detection of urinary androgenic steroids. The experiments showed that the high-resolution MS method is clearly more efficient than the low-resolution MS technique for the detection of many urinary steroids. However, comprehensive sample clean-up procedures also might be needed especially in confirmation analysis to increase detectability.

• Journal of the Korean Society of Food Culture
• /
• v.27 no.6
• /
• pp.686-694
• /
• 2012

This study was conducted to develop a method to change the color of traditional Dongchimi using natural dyes to meet changing consumer demands. It was intended to improve the manufacturing process ability for color Dongchimi, and the best optimum extraction solvent and method from the natural dyes were proven to be confirmed and valid. The extraction process was evaluated using different solvents including distilled water, 20% ethyl alcohol, and 1% citric acid, and the quantity of the extracted anthocyanin was then measured based on the absorbance. The greatest absorbance was observed when 1% citric acid was used. Based on these findings, it would be most efficient to allow the traditional Dongchimi to produce citric acid naturally instead of using artificial additives during its production. Celosia cristata L. was extracted in its largest quantity when reacted with 20% ethyl alcohol. Therefore, instead of applying Celosia cristata L. to Dongchimi as the sub-ingredient during the preparatory stage, it will be more efficient to use Celosia cristata L. as the fractional ingredient in order to first extraction.

• Analytical Science and Technology
• /
• v.31 no.3
• /
• pp.112-121
• /
• 2018

The hydrothermal carbonization method has received great attention because of the conversion process from biomass. The reaction produces various products in hydrochar, bio-liquid, and gas. Even though its yield cannot be ignored in amount, it is difficult to find research papers on bio-liquid generated from the hydrothermal carbonization reaction of biomass. In particular, the heterogeneity of feedstock composition may make the characterization of bio-liquid different and difficult. In this study, bio-liquid from the hydrothermal carbonization reaction of food wastes at $230^{\circ}C$ for 4 h was investigated. Among various products, fatty acid methyl esters were analyzed using two different extraction methods: liquid-liquid extraction and column chromatography. Different elutions with various solvents enabled us to categorize the various components. The eluents and fractions obtained from two different extraction methods were analyzed by gas chromatography with a mass spectrometer (GC/MS). The composition of the bio-liquid in each fraction was characterized, and seven fatty acid methyl esters were identified using the library installed in GC/MS device.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.936-941
• /
• 2005

Green tea was extracted with different solvents such as hot water, varying concentrations of ethanol and carbon dioxide fluid. The carbon dioxide fluid extraction of green tea was a very effective extraction method in terms of antioxidant yield and stability. At pressure of 125kgf, antioxidant extract of green tea produced a yield 1.87 and 2.8 times higher than hot water and $95\%$ ethanol extract, respectively. Antioxidant extract of carbon dioxide fluid was also very stable during 7-day storage at 35?.

• The Korean Journal of Food And Nutrition
• /
• v.34 no.2
• /
• pp.137-145
• /
• 2021

This study was conducted in order to investigate the antioxidant and antimicrobial activity of Solanum nigrum L. fruit powder after undergoing different extraction solvent processes. The total phenolic content of Solanum nigrum L. fruit powder measured a 14.66 GAE mg/g after undergoing ethanol extraction, and the total flavonoid content measured at 201.23 mg CE/g when undergoing ethanol extraction. The ABTS radical scavenging activity was 160.38~209.53 TEAC umol/g, and the DPPH radical scavenging activity was 53.99~90.76 TEAC umol/g, which indicated a higher level of antioxidant power in the ethanol extract as opposed to in the water extract. The FRAP (ferric reducing antioxidant power) of Solanum nigrum L. fruit powder was 115.58~194.58 TEAC umol/g, and B. subtilis KCTC 2189 showed greater antimicrobial activity in the ethanol extract (concentration 200 ug/uL) as opposed to the water extract. Solanum nigrum L. fruit powder revealed differences in antioxidant and antimicrobial activity between the different extraction solvents. In particular, ethanol extract had higher antioxidant and antibacterial activity, meaning it is more favorable for usage as a functional food material.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1623-1634
• /
• 2022

A new irradiation loop design has been developed, which provides the ability to carry out radiolytic resistance studies of extraction systems simulating process relevant conditions in an easy and simple way. The step-by-step loop configuration permits an easy modification of settings and has a relative low volume requirement. This irradiation loop has been initially set up to test the main EURO-GANEX process steps: the lanthanide (Ln) and actinide (An) co-extraction followed by the transuranic (TRU) stripping. The performance and changes in the composition have been analyzed during the irradiation experiment by different techniques: gamma spectroscopy and ICP-MS for the extraction and corrosion behavior of the full system, and HPLC-MS and Raman spectroscopy to determine the degradation of the organic and aqueous solvents, respectively. The Ln and An co-extraction step and the corrosion that occurred during the first irradiation step revealed the favorable expected results according to literature. The effects of acidity changes occurred during the irradiation process, the presence of stainless corrosion products in solution as well as the new possible degradation compounds have been explored in the An stripping step. The results obtained demonstrate the importance of developing realistic irradiation experiments where different factors affecting the performance can be easily studied and isolated.