• 자원리싸이클링
• /
• 제14권5호
• /
• pp.18-23
• /
• 2005

초산, 질산, 인산이 함유된 폐혼산으로부터 인산을 분리하여 재활용하기 위한 방법으로 용매추출법을 이용하였다. 폐혼산에서 초산과 질산을 선택적으로 분리하고, 추출 잔류액에서 인산을 회수하고자 하였다. 주요 실험 변수로는 추출제 농도, 교반시간, 교반속도 등의 변화에 따른 초산, 질산, 인산의 추출거동을 조사하였다. 또한, McCabe-Thiele diagram으로부터 초산, 질산 성분의 추출 및 탈거에 필요한 이론적 단수를 조사하였다. 실험결과 인산염계 추출제를 사용할 경우 초산과 질산을 선택적으로 분리 추출이 가능하였으며, 추출제의 함량은 유기상의 50%가 적합하였다. 교반속도와 교반시간의 영향은 크게 없었으며, 상비(A/O)=1/3, 6단에서 초산과 질산을 완전히 추출 분리하여 인산을 추출잔류액에서 회수가 가능하였다.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.438-445
• /
• 2017

탄자니아에는 풍부한 구리 매장량이 있으나, 적절한 구리 회수 공정의 결핍과 광산 기술 개발을 위한 자금 부족으로 구리 금속의 추출량은 여전히 낮은 상태이다. 이에 따라 소규모 구리 채굴을 위한 간단한 처리공정 개발에 중점을 두어 구리광석에서 구리를 추출하기 위한 침출법과 용매 추출법을 연구하였다. 사용된 구리광석은 규공작석이었으며, 침출 시약으로 황산을 사용하였다. 침출 공정에서 시료의 입경이 $53{\mu}m$보다 작고, 98%(w/w) 황산 농도가 5.0 g/L, 교반 속도가 60에서 80 rpm일 때 최대 구리 회수율이 95.1% 이었다. 용매 추출에서 구리 2가 양이온의 최고의 선택 비율은 등유에 녹인 15 % LIX-70을 이용하여 얻어졌다. pH가 0.5에서 3.0까지, 구리 2가 양이온 추출 효율은 pH가 증가함에 따라 증가했다. 그러나 3.0이상의 pH에서는 다른 금속 이온이 구리 2가 양이온보다 유기물층으로 더 많이 추출되었다. 최고의 용매 추출율은 15% LIX-70를 사용하여 각각 pH 2.0 및 3.0에서 96.5% 이었다.

• Natural Product Sciences
• /
• 제24권3호
• /
• pp.199-205
• /
• 2018

To determine the optimum extraction conditions that give the highest yield of isoquercitrin and caffeic acid from Aster scaber, the effects of four extraction variables (solvent concentrations, extraction time, number of repeated extraction, and solvent volumes) on isoquercitrin and caffeic acid yield was examined via HPLC-UV. Our results showed that the highest extract and isoquercitrin yield were observed when A. scaber was extracted with 450 mL distilled water for 8 hr repeatedly for three times. In case of caffeic acid, the content was higher in the two repeated extracts. Also, content analysis of isoquercitrin in Aster species was performed in which A. fastigiatus, A. ageratoides, and A. scaber exhibited the highest isoquercitrin content at 6.39, 5.68, and 2.79 mg/g extract, respectively. In case of caffeic acid, the highest content of A. scaber and A. glehni was 0.64 and 0.56 mg/g extract, respectively. This study reports an optimized method for extraction of isoquercitrin and caffeic acid from A. scaber and evaluates potential sources of the compounds.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.172-182
• /
• 2014

Extraction is a necessary element in the bioconversion of lignocellulosics to fuels and chemicals. Although various forms of chemical pretreatment of cellulosic materials have been proposed, their effectiveness varies depending on the treatment conditions and substrate. In this study, mixed hardwood (MH) and loblolly pine (LP) were pretreated with dilute acid in a 100 mL accelerated solvent extraction (ASE) at the predetermined optimal conditions: temperature: $170^{\circ}C$, acid concentration: 0.5% (w/v), and reaction time: 2~64 min. This method was highly effective for extracting the hemicellulose fraction. Total xmg (defined as the sum of xylose, mannose, and galactose) can be extracted from milled MH and LP through pressurized dilute acid treatment in maximum yields of 12.6 g/L and 15.3 g/L, respectively, representing 60.5% and 70.4% of the maximum possible yields, respectively. The crystallinity index increased upon pretreatment, reflecting the removal of the amorphous portion of biomass. The crystalline structure of the cellulose in the biomass, however, was not changed by the ASE extraction process.

• 한국식생활문화학회지
• /
• 제36권6호
• /
• pp.622-632
• /
• 2021

This study was conducted to find out the optimal solvent extraction method [Distilled water (DW), 70% ethanol, 99% ethanol] of mushrooms, including Pleurotus ostreatus (Jacq.) Que, Pleurotus eryngii and Flammulina velutipes and improve their usability as natural antioxidants. To analyze antioxidant activities in each mushroom, total polyphenol, flavonoid contents, 2,2-Diphenyl-1-picrylhydrazyl (DPPH), 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) cation radical (ABTS⁺) and fluorescence recovery after photobleaching (FRAP) were measured. All mushrooms showed the highest total polyphenol contents in DW mushroom extract (p<0.001). Total flavonoid contents were the highest in P. eryngii and F. velutipes DW and 70% ethanol mushroom extracts (p<0.05). All mushrooms showed the highest activities using DPPH and FRAP assays in the DW extraction method (p<0.001). P. ostreatus (Jacq.) Que and P. eryngii showed the highest ABTS⁺ radical scavenging activity in the DW extraction method, and F. velutipes showed the highest activity in the 70% ethanol extraction method (p<0.001). As a result of comparing IC₅₀ values of DPPH and ABTS+ radicals and FRAP EC₅₀ values, the DW P. ostreatus (Jacq.) Que extract showed high antioxidant activities (p<0.001). Pearson's correlation between total polyphenol contents and antioxidant activities showed a positive correlation in all mushrooms (p<0.01). Therefore, extraction of the mushrooms with DW can enhance the extraction of effective bioactive substances and antioxidant activity.

• 대한가정학회지
• /
• 제39권4호
• /
• pp.49-59
• /
• 2001

Natural red and yellow dyestuff was extracted from safflower (Carthamus tinctorius Linnaeus) by a new process of cellulase extraction compared with the conventional hot water extraction. Dyestuffs were extracted from safflower easily and repeatedly by means of cellulose as safflower cell wall destroyer. It means that new dyestuff extraction by cellulase improves not only yields of dyestuff from safflower successfully but also the rate of repetition of extraction. From the above experiments, the conclusions of this study were summarized as follows. 1. The optimum conditions of dyestuff extraction from safflower by general extraction method were that the solvent was the water of pH 6.0 on yellow dyestuff and 3% $K_2CO_3$ solution on red dyestuff, extraction temperature was $55^{\circ}C$, and extraction time was 30 min. 2. Among various cellulase, the NOVO cellulase was the best cell wall destroyer of safflower and finally produced the largest amount of dyestuff from safflower by cellulase extraction method. 3. The optimum conditions of dyestuff extraction by cellulase extraction method were conducted on 10 unit of cellulase per gram of safflower at $100m{\ell}$ water of pH 5.0 at $50^{\circ}C$ for 30 min.

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2389-2395
• /
• 2007

Headspace solid phase trapping solvent extraction (HS-SPTE) and GC-MS was applied for the characterization of volatile flavors from fennel, anise seed, star-anise, dill seed, fennel bean, and Ricard aperitif liquor. Tenax was used for HS-SPTE adsorption material. Recoveries, precision, linear dynamic ranges, and the limit of detection in the analytical method were validated. There were some similarities and distinct differences between fennel-like samples. The Korean and the Chinese fennels contained trans-anethole, (+)-limonene, anisealdehyde, methyl chavicol as major components. The volatile aroma components from star anise were characterised by rich trans-anethole, (+)-limonene, methyl chavicol, and anisaldehyde. Additionally, principal component analysis (PCA) has been used for characterizing or classifying eight different fennel-like samples according to origin or other features. A quite different pattern of dill seed was found due to the presence of apiol (dill).

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.969-973
• /
• 2008

Solvent extraction using a Schiff-base, salen$(NEt_2)_2$, as a chelating agent has been conducted on several water samples to study the determination of trace Cu(II), Mn(II) and Zn(II). Experimental conditions for the formation and extraction of metal complexes were optimized with an aqueous solution similar in composition to the samples. The matrix difference between the sample and standard solutions was approximately matched, and the pH of each sample solution was adjusted to 9.5 with $NaHCO_3/NaOH$ buffer. The concentration of salen$(NEt_2)_2$ was $7.3\;{\times}\;10^{-3}$ mol/L, and the complexes were extracted into MIBK solvent followed by the measurement of AAS absorbance. The potential interference of concomitant ions was investigated, but no interference from alkaline and alkali earth ions was shown in this procedure. The given procedure is precise, as judged from the relative standard deviation of less than 5% for five measured data. The recovery of 93-103% shows that this method is quantitative for such trace metal analysis.

• 한국물환경학회지
• /
• 제36권1호
• /
• pp.48-54
• /
• 2020

This paper presents a screening protocol for the selection of solvents available for the solvent extraction desalination process. The desalination solvents hypothetically and theoretically require the capability of (1) Forming hydrogen bonds with water, (2) Absorbing some water molecules into its non-polar solvent layer, (3) Changing solubility for water-solvent separation, and (4) Rejecting salt ions during absorption. Similar to carboxylic acids, amine solvents are solvent chemicals applicable for desalination. The key parameter for selecting the potential solvent was the octanol-water partitioning coefficient (Kow) of which preferable value for desalination was in the range of 1-3. Six of the 30 amine solvents can absorb water and have a variable, i.e., temperature swing solubility with water molecule for water-solvent separation. Also, the hydrogen bonding interaction between solvent and water must be stronger than the ion-dipole interaction between water and salt, which means that the salt ions must be broken from the water and only water molecules absorbed for the desalination. In the final step, three solvents were selected as desalination solvents to remove salt ions and recover water. The water recovery of these three solvents were 15.4 %, 2.8 %, 10.5 %, and salt rejection were 76 %, 98 %, 95 %, respectively. This study suggests a new screening protocol comprising the theoretical and experimental approaches for the selection of solvents for the desalination method which is a new and challenges the desalination process in the future.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.119-122
• /
• 2003

Quantitation methods of total petroleum hydrocarbons to determinate oil contaminated level in soil were discussed. Extraction characteristics of several pretreatment methods and practical detection limit and reappearances in gas chromatography/mass spectrometry. with each pretreatment method were investigated. The obtained results showed that the newly adopted quantitation method and mechanical shaking extraction method using methanol with extraction solvent are more practical and applicable to real sample than the conventional methods. In applying these methods to gasoline, kerosene, fuel oil which are major source of soil contamination, the practical quantitation limit and % relative standard deviation was able to determine with range of 2.5 - 10 ppm, 5 - 7 ％.