• Journal of the Korean Society of Food Culture
• /
• v.34 no.3
• /
• pp.361-368
• /
• 2019

The purpose of this study was to establish the best optimized extraction condition for the optimal development of fresh maca beverage using low temperature extraction and enzyme treatment. Low temperatures were applied to prevent heat-related nutritional loss during the extraction process. Best extraction conditions were investigated based on the ratio of maca to water, the ratio of enzymes, extraction temperature and time, and agitation. The optimal enzyme conditions were also examined after the treatment of cellulase:pectinase mixture to maintain the original color and flavor, as well as to increase the extraction yield. When cellulase:pectinase was 1:1, the extraction rate ranged from 77.84 to 79.29%. In addition, the best extraction rate was found when maca was mixed with twice volume of water and incubated at $45^{\circ}C$ ($84.05{\pm}0.32%$) with 90 rpm ($87.13{\pm}0.46%$) agitation for 3 hours ($84.73{\pm}0.29%$). Furthermore, sensory evaluation showed a high score in flavor, sweetness, and overall acceptability after adding 3% jujube concentrate into a fresh maca beverage.

• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.1-6
• /
• 2014

Objectives : This study was aimed to compare Gyejibokryeong-hwan (GBH) decoctions produced using different pressure levels for various extraction times to find the optimal extraction conditions through extraction yield, total soluble solids content (TSSC), hydrogen ion concentration (pH), and the contents of chemical compounds. Methods : Decoctions of GBH were prepared under the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min using water as extraction solvent. The extraction yield, TSSC, and pH were measured, and the amounts of the chemical compounds were determined using high performance liquid chromatography-photodiode array detector. Results : The higher pressure and longer extraction time increased the values of TSSC and extraction yield, while decreased the pH value. The decoctions produced in 180 min by pressurized method and produced in 150 min by non-pressurized method showed maximum values of extraction yield and TSSC with minimum value of pH. The amounts of chemical compounds showed variations in pressurized and non-pressurized decoction during overall extraction times. The influences of pressure and extraction time on extraction yield, TSSC, pH, and the contents of chemical compounds were confirmed by regression analysis, which showed that all extraction values were significantly affected by at least one of two extraction factors, pressure and extraction time. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GBH decoctions. However, optimal extraction conditions could not be chosen due to the variation of the amounts of chemical compounds.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.111-116
• /
• 2016

To determine the optimum condition for the extraction of active components, noni adventitious roots were extracted under various conditions employing various solvents including methanolic water at different ratio (20, 40, 60, 80, and 100% water), extraction times and extraction methods. Anthraquinones, phenolic compounds, and flavonoids extraction using different solvents showed that 1 h of ultrasonic extraction was effective in 60-80% methanol, and 2 h of reflux extraction was effective in 80% methanol. To compare the extraction efficiency of active components according to different extraction methods and extraction times for noni adventitious roots, the active components were extracted by ultrasonic extraction, shaking extraction, reflux extraction, homogenizer extraction, high-pressure extraction, and soaking extraction. The highest phenolic contents were found in the extracted from ultrasonic extraction and anthraquinones and flavonoids contents were highest in the reflux extraction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.10
• /
• pp.1565-1570
• /
• 2014

Response surface methodology (RSM) was used to optimize extraction conditions of Pleurotus cornocopiae. Coefficients of determination (R2) for dependent variables ranged from 0.86 at 0.91. Maximum extraction yield was 40.81% under the following conditions: microwave power of 60.08 watts, ethanolic concentration of 12.33%, and extraction time of 6.86 min. Maximum extraction electron donating ability was 35.72% at 44.13 watts, 19.30%, and 4.21 min. Maximum extraction superoxide dismutase (SOD)-like activity was 34.87% at 114.01 watts, 65.88%, and 1.56 min. Maximum extraction total polyphenol content was 31.77 mg/g at 50.52 watts, 23.00% and 2.90 min. Based on the superimposition of four dimensional RSM with respect to extraction yield, electron donating ability, SOD-like activity, and total polyphenol content obtained under various extraction conditions, the optimum ranges of extraction conditions were as follows: microwave power of 71.48~92.84 watts, ethanol concentration of 55.01~71.66%, and extraction time of 3~9 min.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.1
• /
• pp.105-110
• /
• 2007

Extraction characteristics of onion (Allium cepa) and the functional properties of corresponding extracts were monitored by the response surface methodology (RSM). The maximum extraction yield of 44.02% was obtained under the specific extraction conditions, such as microwave power of 143.13 W, ethanol concentration of 61.77% and extraction time of 3.39 min. The maximum electron donating ability (EDA) was found as 45.85% at the conditions of 143.55 W microwave power, 27.52% ethanol concentration and 4.86 min extraction time. The maximum inhibitory effect on tyrosinase was 65.40% at 132.29 W, 36.47% and 7.62 min. The maximum superoxide dismutase (SOD)-like activity was 69.84% under the extraction conditions of 99.41 W, 8.47% and 7.13 min. Based on superimposition of four dimensional RSM with respect to extraction yield, electron donating ability and SOD-like activity obtained under the various extraction conditions, the optimum ranges of extraction conditions were found to be microwave power of 0$\sim$120 W, ethanol concentration of 70$\sim$80% and extraction time of 2$\sim$10 min.

• Korean Journal of Pharmacognosy
• /
• v.38 no.1
• /
• pp.56-61
• /
• 2007

This study was carried out to investigate the optimum conditions for extraction of acidic polysaccharides from red ginseng marc produced by manufacturing alcoholic extract from red ginseng. Method of carbazole-sulfuric acid was applied to determine the amount of acidic polysaccharides in red ginseng marc. The amounts of acidic polysaccharides in water extract of red ginseng marc were increased with increasing extraction temperature. The contents of acidic polysaccharides were not significantly different despite of the extraction time increasing from 6 hours to 48 hours. The contents of starch in water-extract of red ginseng marc were increased with increasing extraction temperature. The starch amounts in water extract of red ginseng marc extracted for 48 hours were increased. The yields of polysaccharide precipitated from water-extract of red ginseng marc were increased with increasing extraction temperature. The hydration rate of acidic polysaccharides and starch from water-extract of red ginseng marc were decreased with increasing extraction temperature. The contents of starch were not significantly different despite of the extraction time increasing from 6 hours to 48 hours at $8^{\circ}C$. However, the rehydration rate of acidic polysaccharide for 48 hours were decreased at $8^{\circ}C$. The rehydration rate of acidic polysaccharide and starch extracted from 6 hours to 24 hours at $25^{\circ}C$ were not significantly different, but those extracted for 48 hours were increased. From the above results, we suggest that by altering the extraction conditions in red ginseng marc it is possible to develop optimum conditions for extraction that modulate the proportions of acidic polysaccharide and starch.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.45 no.2
• /
• pp.93-98
• /
• 2022

To assess the feasibility of silk sericin for non-textile application, the storage stability and biological safety of sericin were examined. It was extracted at 37℃, 70℃, 100℃, and 121℃ for 1, 3, and 5 h to elucidate the effect of extraction condition on the stability and safety of silk sericin. The solubility was increased till approximately 26% with extraction temperature of 121℃ for 1 h. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) showed that the molecular weight distribution depended on the extraction conditions. Extracted sericin displayed typical UV absorption bands upon spectrometric analysis. To examine the reproducibility of its obtained conformation, sericin was extracted thrice and its circular dichroism (CD) spectra was measured each time. Most CD spectra showed reproducibility regardless of temperature and time except under 100℃ extraction condition. The diversity of CD spectrum showed gradual reduction and was finally coincident with extraction time from 1 to 5 h. Notably, sericin has a negative peak of approximately 200 nm attributed to random coil conformation, regardless of extraction condition. However, at the 100℃ extraction condition, sericin showed both bands to be negative bands of approximately 200 and 220 nm, respectively. Sericin was centrifuged to determine the stability of storage conditions. The sericin extracted at 100℃ and 121℃ for 1 h was found to form gel rapidly within 1 h, but at 121℃ condition, the gel fraction was approximately 20% within 1 h which retained its phase regardless of storage time. The gel fraction of sericin extracted at 100℃ for 5 h increased with time, however at the 121℃ for 5 h condition, the gel fraction was measured to be less than 10% regardless of increase in storage time. Petriflim^TM AC plates test showed that sericin was safe from aerobic bacteria activity by extraction under high temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.11
• /
• pp.1343-1349
• /
• 2017

This study was carried out to determine the simultaneous extraction conditions of functional components (lutein, ${\beta}$-carotene, total polyphenol, flavonoids, and phenolic compounds) from sweet potato leaves and to evaluate the antioxidant activities. Extraction conditions included different ethanol concentrations (1st extraction: 99.9% ethanol; 2nd extraction: 50~90% ethanol) and times (30, 60, and 90 min). The highest values of lutein and ${\beta}$-carotene content were obtained by the 2nd extraction at an ethanol concentration of 90%. The extraction yields of lutein and ${\beta}$-carotene decreased with increasing extraction time. The maximum polyphenol, flavonoid, and total phenolic acid contents and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) and 1,1-diphenyl-2-picrylhydrazyl radical scavenging activities were 32.3 mg gallic acid equivalent/g, 17.0 mg catechin equivalent/g, 2,842.6 mg/100 g, 17.0 mg ascorbic acid equivalent/g, and 1.94 mg/mL ($IC_{50}$) at the 2nd extraction with an ethanol concentration of 60%. The optimum extraction conditions were as follows; ethanol concentrations of the extraction solvent were 99.9% (1st extraction) and 60% (2nd extraction), and extraction time was 30 min.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.491-501
• /
• 2002

A cross-examination between KT&G Central Research Institute and Guangzhou Institute for Drug Control was carried out in order to select optimum conditions for extraction, separation and determination of ginsenosides in red ginseng and to propose a better method for the quantitative analysis of ginsenosides. The optimum extraction conditions of ginsenosides from red ginseng were as follows: the extraction solvent, $70\%$ methanol; the extraction temperature, $100^{\circ}C;$ the extraction time, 1 hour for once; and the repetition of extraction, twice. The optimum separation conditions of ginsenosides on the SepPak $C_{18}$ cartridge were as follows: the loaded amount, 0.4 g of methanol extract; the washing solvents, distilled water of 25 ml at first and then $30\%$ methanol of 25 ml; the elution solvent, $90\%$ methanol of 5 ml. The optimum HPLC conditions for the determination of ginsenosides were as follows: column, Lichrosorb $NH_2(25{\times}0.4cm,$ 5${\mu}m$, Merck Co.); mobile phase, a mixture of acetonitrile/water/isopropanol (80/5/15) and acetonitrile/water/isopropanol (80/20/15) with gradient system; and the detector, ELSD. On the basis of the optimum conditions a method for the quantitative analysis of ginsenosides were proposed and another cross-examination was carried out for the validation of the selected analytical method conditions. The coefficient of variances (CVs) on the contents of ginsenoside-$Rg_{1}$, -Re and $-Rb_1$ were lower than $3\%$ and the recovery rates of ginsenosides were $89.4\~95.7\%,$ which suggests that the above extraction and separation conditions may be reproducible and reasonable. For the selected HPLC/ELSD conditions, the CVs on the detector responses of ginsenoside-Rg, -Re and $-Rb_1$) were also lower than $3\%$, the regression coefficients for the calibration curves of ginsenosides were higher than 0.99 and two adjacent ginsenoside peaks were well separated, which suggests that the above HPLC/ELSD conditions may be good enough for the determination of ginsenosides.

• Journal of Ginseng Research
• /
• v.18 no.1
• /
• pp.53-59
• /
• 1994

To develop the methodology of the quantitative analysis of saponin in ginseng milk, conditions of the saponin extraction were optimized using the fractional factorial design with 3 variables and 3 levels by a RSM computer program. The extraction of saponin increased with an increase in extraction temperature up to $90^{\circ}C$ and then decreased significantly at $100^{\circ}C$. Extraction time affected the saponin yield in a similar trend. On the other hand, decreasing cooling temperature increased the amount of the saponin extracted. Recovery yield of the saponin from ginseng milk varied from 70.0% to 92.9%. The optimum extraction temperature, time and cooling temperature determined by partial differentiation of the model equation were $86^{\circ}C$, 2.83 hrs and $4^{\circ}C$, respectively. Key words Ginseng milk, saponin, response surface methodology.