• Journal of Applied Biological Chemistry
• /
• v.63 no.4
• /
• pp.413-420
• /
• 2020

We studied the effects of the extract of aerial parts of hydroponically cultured ginseng (HGE) on alcohol-induced liver damage (AILD) in mice. AILD was induced by the oral administration of ethanol (EtOH) (25%; 5 g/kg body weight) for seven days in the study as well as EtOH-only groups. However, HGE (4 and 12 mg/kg) was orally administered (once daily for ten consecutive days) only to the study group, three days prior to the EtOH treatment. The HGE-treated group showed significantly lower levels of alanine aminotransferase and aspartate aminotransferase than the EtOH-only group. In addition, HGE administration decreased the level of serum lactate dehydrogenase, a known marker of liver damage. The effect of HGE on AILD was found to be dose dependent, and the consecutive administration of HGE showed no side effects in mice. Our study indicates that HGE treatment can potentially reduce oxidative stress and toxicity in the liver of alcohol-treated mice and that HGE can be a useful therapeutic agent for alcohol-induced hepatotoxicity. Additionally, a simple and efficient high-performance liquid chromatography-ultraviolet detection method was developed for determining the contents of four major ginsenosides in HGE. The aerial parts of hydroponically cultured ginseng were extracted using 70% fermented ethanol, and the contents of ginsenosides F5, F3, F1, and F2 in HGE were found to be 2.5, 4.4, 1.4, and 23.3 mg/g, respectively.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.541-548
• /
• 2020

There is a growing demand for natural materials to replace adhesives based on volatile organic compounds (VOCs). However, the exclusion of VOCs from the manufacturing process leads to difficulties in manufacturing, and reduction in productivity and preservability. In this paper, we report the manufacture of natural bioadhesives using the carrageenan component of seaweed. λ-carrageenan, isolated from the extracted total carrageenan, was used to prepare a highly stable adhesive for paper. The resulting composition was 52.0 ± 1.0% λ-carrageenan, 30.5 ± 0.5% Polyvinylpyrrolidone, 1.0 ± 0.05% ethylhexylglycerin, 1.5 ± 0.05% glycerin, 13.5 ± 0.5% dextrine, and 0.6 ± 0.05% food-grade antifoam emulsion. The viscosity was found to be 1.13 ± 0.07 × 105 cP (25℃), UV degradation occurred at pH6.22, drying rate was 15min, △b^* was -10.79, and △E^* ab was 8.18. The bioadhesive showed an excellent adhesion strength of 44.63 kgf/cm². Thus this adhesive showed excellent fungal resistance and good adhesive persistence, without the presence of total volatile organic compounds (TVOC), formaldehyde (HCHO), and heavy metals.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.148-158
• /
• 2022

The electrochemical CO₂ reduction (ECR) to produce value-added fuels and chemicals using clean energy sources (like solar and wind) is a promising technology to neutralize the carbon cycle and reproduce the fuels. Presently, the ECR has been the most attractive route to produce carbon-building blocks that have growing global production and high market demand. The electrochemical CO₂ reduction could be extensively implemented if it produces valuable products at those costs which are financially competitive with the present market prices. Herein, the electrochemical conversion of CO₂ obtained from flue gases of a power plant to produce diesel and formic acid using a consistent techno-economic approach is presented. The first scenario analyzed the production of diesel fuel which was formed through Fischer-Tropsch processing of CO (obtained through electroreduction of CO₂) and hydrogen, while in the second scenario, direct electrochemical CO₂ reduction to formic acid was considered. As per the base case assumptions extracted from the previous outstanding research studies, both processes weren't competitive with the existing fuel prices, indicating that high electrochemical (EC) cell capital cost was the main limiting component. The diesel fuel production was predicted as the best route for the cost-effective production of fuels under conceivable optimistic case assumptions, and the formic acid was found to be costly in terms of stored energy contents and has a facile production mechanism at those costs which are financially competitive with its bulk market price. In both processes, the liquid product cost was greatly affected by the parameters affecting the EC cell capital expenses, such as cost concerning the electrode area, faradaic efficiency, and current density.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.2
• /
• pp.135-151
• /
• 2022

BACKGROUND: The β-agonists known as phenyl ethanolamine derivatives have a conjugated aromatic ring with amino group. They are used as tocolytic agents and bronchodilator to human and animal generally, and some of them are used as growth promoters to livestock. METHODS AND RESULTS: β-agonists in samples were extracted by 0.4 N perchloric acid and ethyl acetate. The target compounds were analyzed by liquid chromatography-electrospray tandem mass spectrometry (LC-ESI-MS/MS). Validation of method was performed according to CODEX guidelines (CAC/GL-71). The matrix matched calibration gave correlation coefficients>0.98, and the obtained recoveries were in the range of 62.0-109.8%, with relative standard deviation ≤ 20.1%. In addition, a survey was performed to inspect any residual β-agonist from 100 samples of livestock and fishery products and ractopamine was detected in one of the 100 samples. CONCLUSION(S): In this study, we established the analytical method for β-agonists through using the expanded target compounds and samples. And we anticipate that the established method would be used for analysis to determine veterinary drug residues in livestock and fishery products.

• Clean Technology
• /
• v.15 no.2
• /
• pp.81-90
• /
• 2009

In this study various cleaning evaluation methods were tested and comparatively evaluated to help cleaning industry. In order to select alternative cleaning agents objectively and systematically, various cleaning evaluation methods such as gravimetric, optically simulated electron emission (OSEE), contact angle, and analytical instrument methods were employed for cleaning contaminants such as flux, solder and grease. The analytical instruments used in this work were Fourier transform infrared spectroscopy (FTIR), ultraviolet visible spectroscopy (UV-VIS) and high performance liquid chromatography (HPLC). The gravimetric method was able to measure cleaning efficiencies easily and simply, but it was not easy to analyze them precisely because of its limitation in the gravimetric measurement. However, the OSEE technique was able to measure quickly and precisely the clean ability of cleaning agents in comparison with the gravimetric method. The contact angle method was found to be necessary for taking special precaution in its application to the cleaning evaluation due to possible formation of tiny organic film on the substrate surface which might be generated from contaminants and cleaning agents. In case of precision analysis that cannot be done by gravimetric method, fine analytical instruments such as UV-VIS, FTIR and HPLC could be used in analyzing trace amount of flux, solder and grease quantitatively, which were extracted from the surface by special solvents.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.1
• /
• pp.71-81
• /
• 2023

An accurate and easy-to-use analytical method for determining isocycloseram and its metabolites (SYN549431 and SYN548569) residue is necessary in various food matrixes. Additionally, this method should satisfy domestic and international guidelines (Ministry of Food and Drug Safety and Codex Alimentarius Commission CAC/GL 40). Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) was used to determine the isocycloseram and its metabolites residue in foods. To determine the residue and its metabolites, a sample was extracted with 20 mL of 0.1% formic acid in acetonitrile, 4 g magnesium sulfate anhydrous and 1 g sodium chloride and centrifuged (4,700 G, 10 min, 4℃). To remove the interferences and moisture, d-SPE cartridge was performed before LC-MS/MS analysis with C₁₈ column. To verify the method, a total of five agricultural commodities (hulled rice, potato, soybean, mandarin, and red pepper) were used as a representative group. The matrix-matched calibration curves were confirmed with coefficients of determination (R²) ≥ 0.99 at a calibration range of 0.001-0.05 mg/kg. The limits of detection and quantification were 0.003 and 0.01 mg/kg, respectively. Mean average recoveries were 71.5-109.8% and precision was less than 10% for all five samples. In addition, inter-laboratory validation testing revealed that average recovery was 75.4-107.0% and the coefficient of variation (CV) was below 19.4%. The method is suitable for MFDS, CODEX, and EU guideline for residue analysis. Thus, this method can be useful for determining the residue in various food matrixes in routine analysis.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.33-41
• /
• 2023

Herein, we selectively recovered Zn and produced ZnSO₄ from electric arc furnace dust using a hydrometallurgical process. The analysis of the properties of the electric arc furnace dust revealed that the Fe content (9.9%) was relatively low while the Mn content (19%) was high as compared to the composition of general dust. Therefore, an appropriate hydrometallurgical process was designed based on the properties of the raw materials. In the leaching process involving the use of 1.6 M sulfuric acid and 20% solid-liquid ratio at 60℃ for 1 h, 85% of the Zn and Mn got dissolved while the Fe was not leached. To selectively recover Zn, a solvent extraction process using D2EHPA as the extractant was chosen, and 99% of the Zn was extracted using 0.8 M D2EHPA with 32% saponification and an O/A ratio of 2 using counter-current 3-stage extraction. Mn was entirely scrubbed with an aqueous sulfuric acid solution of pH 1.5. Finally, Zn was concentrated and stripped using 1.5 M sulfuric acid at an O/A ratio of 4 using counter-current 4-stage stripping. The stripping solution contained 40 g/L of Zn, and 99.9% of ZnSO₄∙H₂O was obtained by vacuum distillation.

• The Korea Journal of Herbology
• /
• v.38 no.4
• /
• pp.21-29
• /
• 2023

Background : The purpose of this study was to investigate the anti-inflammatory properties of stems and leaves of Eleutherococcus senticosus (Rupr. & Maxim.) Maxim. (ES) from Gangwon-do. Methods and Results : Stems and leaves of ES were collected from two areas in Gangwon-do: Cheorwon-gun and Samcheok-si. Samples were extracted with water by using the pressurized liquid extraction method and with 70% prethanol A by using the heat reflux extraction method. The anti-inflammatory effects of ES were evaluated through the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide(MTT), lactate dehydrogenase(LDH) assay, nitric oxide(NO) assay, enzyme-linked immunosorbent assay(ELISA), and Western blot analysis in RAW 264.7 macrophages stimulated with lipopolysaccharide (LPS). 1) Results showed that ES leaf extractions were not cytotoxic at a concentration of up to 30 ㎍/㎖. The leaves of 70% prethanol A extractions of ES(30 ㎍/㎖) inhibited NO, interleukin-6(IL-6), and tumor necrosis factor-α(TNF-α) production and decreased the protein level of cyclooxygenase 2(COX-2). There was no significant change in the protein level of inducible nitric oxide synthase(iNOS). The stem extractions of ES did not exhibit anti-inflammatory effects. Conclusions : In this study, the leaves of 70% prethanol A extractions of ES demonstrated anti-inflammatory effect on RAW 264.7 macrophages. The 70% prethanol A extractions have a relatively higher anti-inflammatory effect on RAW 264.7 macrophages than water extractions.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.142-148
• /
• 2006

To determine malachite green and leuco-malachite green residues in sea food, a liquid chromatographic method has been optimized. The target compounds were extracted in the homogenized edible tissues with a mixture of McIlvaine buffer-acetonitrile and partitioned against dichloromethane. After concentrating the lower layer, the resulting residues were re-dissolved in methanol and analyzed by the HPLC with visible detector at 620 nm using acetonitrile-acetate buffer. For the analysis of leuco-malachite green with malachite green simultaneously, post-column packed with lead(IV) oxide was used for oxidizing leuco-malachite green to malachite green. The correlation coefficients($r^2$) was 0.9989 for malachite green, and 0.9995 for leuco-malachite green. The limit of detection was 0.005 mg/kg for the combined of malachite green and leuco-malachite green at signal/noise${\geq}3$. The recovery rate was within a reliable range of 84~98% (CV 3~16%). Leuco-malachite green were detected in carp and crusian carp.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.347-354
• /
• 2007

A simple and rapid high-performance liquid chromatography assay for the determination of residual novobiocin levels in bovine, porcine, chicken, flatfish and japanese eel muscle has been developed and validated. The separation condition for HPLC/UV was optimized with phenyl hexyl ($4.6{\times}150mm$, $5{\mu}m$) column with 10 mM monobasic sodium phosphate buffer (pH 2.5)/acetonitrile (50/50, v/v) as the mobile phase at a flow rate of 1.0 mL/min and detection wavelength was set at 254 nm. Residues were extracted from tissue by blending with methanol and lipid materials were removed with n-hexane. Then, the methanol extract was evaporated to dryness under a nitrogen stream, reconstituted in the mobile phase. Aliquot of the organic extract was decanted and filtered through $0.45{\mu}m$ syringe filter. The $20{\mu}L$ of the resulting solution was injected into the HPLC system. The calibration ranges were $0.5{\sim}5{\mu}g/g$ and calibration curves were linear with coefficients of correlation better than 0.95. The limits of quantification were $0.5{\mu}g/g$ for all muscles. The recoveries of bovine, porcine, chicken, flatfish and japaneseel muscles were 99.8%, 102.4%, 91.0%, 104.0% and 93.0%, respectively. The procedures were validated according to the CODEX guideline, determining specificity, linearity, accuracy, precision, quantitation limit and recovery.