• Resources Recycling
• /
• v.15 no.5 s.73
• /
• pp.3-10
• /
• 2006

The solvent extraction for the separation of platinum group metals from the leach liquor of spent automotive catalysts has been studied. Tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) and di-n-hexyl sulfide (DHS) were used as extractants and kerosene as a diluent. The extraction behavior of platinum, palladium and rhodium has been investigated as functions of different kinds of extractants and their concentrations. In addition, the extraction behavior of the major metal impurities such as cerium, lead, iron, magnesium and aluminum has been investigated. Platinum and palladium were extracted with TBP. And platinum, palladium and rhodium were extracted with TOA. Platinum was co-extracted with palladium into the organic phase by solvent extraction using SFI-6 of DHS extractant, but only palladium was selectively extracted with SFI-6R. The selective extraction of palladium with SFI-6R was found better than that with SFI-6, but the kinetics of extraction with SFI-6R was found poor in comparison to SFI-6. The metal impurities extracted simultaneously during the extraction of platinum group metals should be removed in scrubbing and stripping processes. A suitable process has been proposed for the separation of platinum group metals from the leach liquor of spent automotive catalysts. Initially palladium was extracted with SFI-6R, followed by the separation of platinum with TBP or TOA leaving rhodium in the raffinate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.4
• /
• pp.364-367
• /
• 1983

This experiment was designed to investigate the optimum conditions for the extraction of protein from the silkworm larvae by using the oven-dried and freeze-dried samples. The extractability was examined on the basis of kinds of extractants, ratio of sample to extractants, extraction time, temperature, and the effect of pH. The following results were obtained: (1) About 56% of proteins were extracted when 0.05M NaOH was used and the highest extractability was obtained at the ratio of 1 : 40 (sample: extractant). (2) The amount of nitrogen extracted was gradually increased when the extraction temperature was increased from $10^{\circ}C$ to $50^{\circ}C$ in both oven-dried and freeze-dried silkworm larvae. The highest amount of nitrogen was extracted at $50^{\circ}C$ in freeze-dried sample and at $60^{\circ}C$ in oven-dried sample. In addition, sixty min. of extraction time showed the highest extractability of nitrogen, however, not much difference in extractability was found after 10 min of extraction time. (3) More than 60% of nitrogens were extracted at pH 13.0, but less than 20% were extracted from pH 1.0 to 11.0. There was only slight difference in extractability of nitrogen between freeze-dried and oven-dried samples.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3979-3990
• /
• 2011

Eight ionizable nano-baskets of cone 25,26-di(carboxymethoxy)calix[4]arene-crown-3,4,5,6 were synthesized and were verified by $^1H$ and $^{13}C$ NMR spectroscopy, IR spectroscopy and elemental analysis. The competitive solvent extractions of alkali and alkaline earth metal cations were studied using such nano-baskets. The novelty of this study is including three binding units of calixarene's bowl, crown ether's ring and electron-donor ionizable moieties in a unique scaffold to assess the binding tendency towards the cations. The objective of this work is to study the extraction efficiency, selectivity and $pH_{1/2}$ of such complexes. The result of solvent extraction experiments indicated that these compounds were effective extractants of alkali and alkaline earth metal cations. Their selectivities were greatly influenced by the acidity of solution and the conformations of the calixcrown. One conformer was selective to $Na^+$ in pH ${\geq}$ 4, while the other was highly selective to $Ba^{2+}$ in pH 6 and upper.

• KSBB Journal
• /
• v.14 no.5
• /
• pp.566-571
• /
• 1999

Lactic acid is of interested as the raw material of biodegradable polymer. In this study lactic acid was separated by reactive extraction with mixed tertiary amine extractant dissolved in 1-octanol/n-heptane. Mixed tertiary amine extractant was composed of tripropylamine(TPA) and trioctylamine(TOA). The concentration range of lactic acid is ca. 5wt% which is the concentration of lactic acid obtained from fermentation.Maximum distribution coeficient was obtained at 8:2 weight ratio of TPA/TOA and their extraction efficiencies were above 90%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.518-524
• /
• 2014

Heavy metal pollution in agricultural field near at the abandoned metal mines has been a critical issue in Korea. In particular, bioaccumulation in plants can have detrimental effect on human health. Main objective of this research was to examine arsenic (As) concentration in soil with varied extraction methods and to determine bioaccumulation and biological transfer factor in different crops. Results showed that bioaccumulation ratio of As for total contents in soil was ordered leafy and stem vegetables (1.19%) > fruit bearing vegetables (0.79%) > pulses (0.40%) > root vegetables (0.36%) with different crop species. Among 6 different extraction methods, all of extraction methods showed high correlation ($R^2=0.87-0.97$) except DTPA ($R^2=0.25$) when comparing As concentration in soil extracted with different extractants and As concentration in each crops. Calculated biological transfer factor was ranged 0.002-0.018 depending on crop species. Overall, concentration of As in crops can be varied and best management practice for minimizing bioaccumulation of As should be considered depending on crop species.

• Journal of Environmental Science International
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2015

The solid-phase extractant PS-D2EHPA/TBP was prepared by immobilizing two extractants D2EHPA and TBP in polysulfone (PS). The prepared PS-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The removal of Cu(II) from aqueous solution was investigated in batch system. The experiment data were obeyed the pseudo-second-order kinetic model. Equilibrium data were well fitted by Langmuir model and the removal capacity of Cu(II) by solid extractant PS-D2EHPA/TBP obtained from Langmuir model was 3.11 mg/g at 288 K. The removal capacity of Cu(II) was increased according to increasing pH from 2 to 6, but the removal capacity was decreased below pH 3 remarkably.

• Journal of Fashion Business
• /
• v.18 no.4
• /
• pp.15-27
• /
• 2014

A natural colorant was extracted from Acer ginnala, Alnus japonica and gromwell as extractants. Studies have been made on the effects of the kind of extracts and dyeing/mordanting conditions on colorimetric changes of ramie fabrics. The color of fabrics tended to become darker as the numbers of dyeing process and mordanting process increased using three kinds of extracts. As the numbers of dyeing and mordanting increased, the ramie fabrics gradually increased to show reddish and bluish signs using Acer ginnala, Alnus japonica, and gromwell extracts(500ml and 1,000ml). In the case of 1,500ml of gromwell extracts, the ramie fabrics showed the color with more redness and yellowness. Color difference (${\Delta}E$) of dyed and mordanted fabrics increased as the numbers of dyeing and mordanting processes increased. The apparent colors of ramie fabrics using Acer ginnala were Y and GY. The Alnus japonica extracts produced Y and GY colors on ramie fabrics. With varying amount of gromwell extracts, the colors of dyed and mordanted fabrics were R, YR, GY, G, PB, P and RP, however, the main color was PB. It was concluded that the extracts of Acer ginnala, Alnus japonica and gromwell can be used as a natural dye producing black colors.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.3-10
• /
• 2013

Indium is one of the rare metals, and it has been used mainly for preparation of indium tin oxide (ITO). This review investigated the process parameters and the merits and demerits of several methods to recover indium from the leaching solution of secondary resources, such as solvent extraction, ion exchange, and precipitation. D2EHPA has been used mostly as a cationic extractant for indium extraction in moderate acid solutions, while amine extractants are used in strong hydrochloric acid solution. Since the loading capacity of resins for indium is generally small, ion exchange has some advantage over solvent extraction only when the concentration of indium is low.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2454-2458
• /
• 2007

Exploring the basic concepts for the design of CO2-philic molecules is important due to the possibility for “green” chemistry in supercritical CO2 as substitute solvent systems. The Lewis acid-base interactions and C?H…O weak hydrogen bonding were suggested as two key factors for the solubility of CO2-philic molecules. We have performed high level quantum mechanical calculations for the van der Waals complexes of CO2 with trimethylphosphate and trimethylphosphine oxide, which have long been used for metal extractants in supercritical CO2 fluid. Structures and energies were calculated using the MP2/6-31+G(d) and recently developed multilevel methods. These studies indicate that the Lewis acid-base interactions have larger impact on the stability of structure than the C?H…O weak hydrogen bonding. The weak hydrogen bonds in trimethylphosphine oxide have an important role to the large supercritical CO2 solubility when a metal is bound to the oxygen atom of the P=O group. Trimethylphosphate has many Lewis acid-base interaction sites so that it can be dissolved into supercritical CO2 easily even when it has metal ion on the oxygen atom of the P=O group, which is indispensable for a good extractant.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.841-849
• /
• 2015

The solid phase extractant SAN-D2EHPA/TBP containing two extractants of Di-(2-ethylhexyl)phosphoric acid (D2EHPA) and Tri-butyl-phosphate (TBP) was prepared by immobilizing two exractants D2EHPA and TBP in styrene acrylonitrile copolymer (SAN). The prepared SAN-D2EHPA/TBP was characterized by using fourier transform infrared spectrometer (FTIR) and scanning electron microscopy (SEM). The solid phase extractant SAN-D2EHPA/TBP was tested for the removal of Cu(II) from aqueous solution. Experiments were carried out as a function of the pH and Cu(II) concentration in the aqueous phase. The equilibrium time was 180 min and equilibrium experiment data obeyed the pseudo-second-order kinetic model. The Langmuir isotherm model represented the experiment data as well. The maximum removal capacity of Cu(II) calculated from Langmuir isotherm model was 3.1 mg/g.