• 한국운동역학회지
• /
• 제16권3호
• /
• pp.19-31
• /
• 2006

이 연구의 목적은 각 분절의 마커세트와 무릎관절 중심 정의가 3차원 무릎 관절각을 산출하는데 얼마나 민감하게 영향을 미치는지를 연구하였다. 자료수집은 1명을 실험대상자로 하여 두 가지 형태의 각기 다른 분절의 정의와 무릎관절의 중심을 나타내는 반사마커들을 동시에 오른쪽 하지에 부착시켜 실험을 실시하였다. 실험대상자의 달리기동작 중 좌측으로 45도 방향전환동작의 지지기를 분석하였다. 이를 위해서 8대의 고속카메라들을 이용하였고 달리기속도는 4m/$sec{\pm}(10%)$로 통제하였다. 하지분절의 발분절에는 하나의 마커세트를, 정강이와 대퇴분절에는 두 가지의 다른 마커세트들을 부착시켰다. 발분절에는 3개의 마커를 신발의 뒷부분에 부착하였고 정강이분절을 정의하기 위하여 첫 번째 마커세트는 경골을 중심으로 3개의 마커들을 두 번째 마커세트는 비골을 중심으로 3개의 마커를 부착하였다. 대퇴분절의 마커세트를 정의하기 위하여 첫 번째 마커세트에는 대퇴골을 중심으로 3개의 마커를 두 번째 마커세트에는 대퇴근육을 중심으로 3개의 마커들을 부착하였다. 무릎관절중심을 정의하는데 두 가지 다른 정의가 적용되었다. 첫 번째 무릎중심을 무릎의 내측과 외측의 마커들을 통해 두 마커의 중심을 무릎관절의 중심으로 정의하였다. 두 번째 무릎중심정의는 무릎의 외측부분과 슬개골의 중심에 부착된 마커들로부터의 교차점을 무릎관절중심으로 산출하였다. 무릎관절의 각도를 산출하기 위해서 JCS(Joint Coordinate System)의 정의가 적용되었고 연구의 결과는 다음과 같았다. 두 가지의 다른 분절마커세트 사이에서 무릎의 신전(extension)과 굴곡(flexion)은 유사한 형태를 나타냈으며 최대 무릎굴곡(peak knee flexion)각에서 $4.746^{\circ}$의 차이를 나타냈다. 다른 분절마커세트 사이의 회전(rotation)각과 내전(adduction)/외전(abduction)에서는 서로 다른 형태를 나타내었고, 두 마커세트간 최대무릎외측회전(peak knee external rotation)각도에서는 $15.628^{\circ}$의 차이를 나타냈다. 또한, 각 분절마커세트 내에서 두 가지의 다른 무릎관절 중심의 정의가 얼마나 무릎도 산출에 영향을 미치는지를 비교했을 때 무릎의 최대외측회전(peak external rotation)각에서 차이를 나타내었다. 첫 번째 분절마커세트의 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.549^{\circ}$의 차이를 나타냈고, 두 번째 분절마커 세트에서 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.309^{\circ}$의 차이를 나타냈다. 이와 같이 분절을 나타내는 마커세트와 무릎관절중심정의의 형태변화에 따라 무릎간을 계산하는데 있어서 결과가 다르게 산출되었다. 즉, 관절각의 계산이 분절에 부착되는 마커의 정의 혹은 위치에 매우 민감하게 영향을 받았다. 따라서 연구자가 여러 실험대상자들을 대상으로 실험시 마커세트 혹은 마커들을 동일한 위치에 가깝게 부착하는 것이 마커부착으로부터 발생하는 실험오차를 줄일 수 있을 것이다.

• Clinics in Shoulder and Elbow
• /
• 제18권3호
• /
• pp.120-127
• /
• 2015

Background: We prospectively compared the response to blind and ultrasound-guided glenohumeral injection of corticosteroids for treatment of shoulder stiffness. Methods: A total of 77 patients with shoulder stiffness between April 2008 and March 2012 were recruited. Patients were randomized to receive either a blind (group 1, n=39) or ultrasound-guided (group 2, n=38) glenohumeral injection of 40 mg triamcinolone. The clinical outcomes and shoulder range of motion (ROM) before injection, at 3, 6, and 12 months after injection and at the last follow-up were assessed. The same rehabilitation program was applied in both groups during the follow-up period. Results: There was no significant difference in demographic data on age, sex, ROM, and symptom duration before injection between groups (p>0.05). There were no significant differences in ROM including forward flexion, external rotation at the side, external rotation at $90^{\circ}$ abduction, and internal rotation, visual analogue scale for pain and functional outcomes including American Shoulder and Elbow Surgeons score, Simple Shoulder test between the two groups at any time point (p>0.05). Conclusions: Based on the current data, the result of ultrasound-guided glenohumeral injection was not superior to that of blind injection in the treatment of shoulder stiffness. We suggest that ultrasound-guided glenohumeral injection could be performed according to the patient's compliance and the surgeon's preference. Once familiar with the non-imaging-guided glenohumeral injection, it is an efficient and reliable method for the experienced surgeon. Ultrasound could be performed according to the surgeon's preference.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.85-95
• /
• 2005

The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle during One Hand Backhand Stroke and Two Hand Backhand in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVIEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head direction were defined. 1. In three dimensional maximum linear velocity of racket head the X axis and Y axis(horizontal direction) showed $-11.04{\pm}2.69m/sec$, $-9.31{\pm}0.49m/sec$ before impact, the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball. It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. The stance distance between right foot and left foot was mean $75.4{\pm}5.86cm$ during one hand backhand stroke and $72.6{\pm}4.67cm$ during two hand backhand stroke. 2. The three dimensional anatomical angular displacement of trunk in interna rotation-external rotation showed most important role in backhand stroke. and is follwed by flexion-extension. the three dimensional anatomical angular displacement of trunk did not show significant difference between one hand backhand stroke and two hand backhand stroke but the three dimensional anatomical angular displacement of trunk was bigger than one hand backhand stroke. 3. while backhand stroke, the flexion-extension and adduction-abduction of right shoulder joint showed significant different between one hand backhand stroke and two hand backhand stroke. the three dimensional anatomical angular displacement of right shoulder joint showed more flex and abduct in one hand backhand stroke. 4. The three dimensional anatomical angular displacement of left shoulder showed flexion, adduction, and external rotation at impact. after impact, The angular displacement as adduction-abduction of left shoulder changed motion direction as abduction. angular displacement of left shoulder as flexion-extension showed bigger than the right shoulder.

• Clinics in Shoulder and Elbow
• /
• 제20권3호
• /
• pp.117-125
• /
• 2017

Background: To compare the clinical outcomes of arthroscopic capsular release in patients with and without inferior capsular release for shoulder stiffness. Methods: Between January 2010 and December 2015, 39 patients who underwent arthroscopic capsular release for shoulder stiffness were enrolled and randomized into two groups. In group I, 19 patients underwent arthroscopic capsular release of the rotator interval and anterior capsule. In group II, 20 patients underwent arthroscopic capsular release of the anterior to inferior capsule, including the rotator interval. The American Shoulder and Elbow Surgeons score, Constant scoring system, Simple Shoulder Test, visual analogue scale for pain, and range of motion (ROM) were used for evaluation before surgery, at 3, 6, and 12 months after surgery and on the last follow-up. Results: Preoperative demographic data revealed no significant differences (p>0.05). The average follow-up was 16.07 months. Both groups showed significantly increased ROM at the last follow-up compared with preoperative (p<0.05). At the last follow-up, no statistical differences were found (p>0.05) between groups I and II in functional scores and ROM (forward flexion, p=0.91; side external rotation, p=0.17; abduction external rotation, p=0.72; internal rotation, p=0.61). But we found that group II gained more flexion compared to group I at 3 months and 6 months (p<0.05) after the surgery. Conclusions: Both techniques of capsular release are effective for stiffness shoulder. However, the extended inferior capsular release shows superiority in forward flexion over anterior capsular release alone during 6 months of follows-up (level of evidence: Level I, therapeutic randomized controlled trial).

• 한국컴퓨터산업학회논문지
• /
• 제10권5호
• /
• pp.221-226
• /
• 2009

폐쇄된 계 내부에서 강체 입자의 회전 운동에는 회전시키는 주체가 되는 몸체와 회전을 당하는 입자로 나눌 수 있다. 이 경우 입자가 몸체에 대해서 구속 될(bounded) 경우 홀로노믹(HOLONOMIC) 시스템으로서 지금까지 동역학에 소개되는 모든 수식이 잘 맞게 해석되고 수식에 의한 구조 또 한 현실과 잘 맞다. 그러나 그 구조가 비흘로노믹 시스템 이면 기존 회전 운동 방정식에서 벗어난다. 본 논문의 목적은 회전 운동 시 홀로노믹 시스템과 비흘로노믹 시스템과의 차이를 장치로 구분 하고 특히 비 홀로노믹 시스템의 현실에서 나타나는 현상을 컴퓨터 시뮬레이션 모델에 수식 화 하는 것이다. 그 수식으로부터 닫힌 회전운동의 질량중심(center of mass) 이동과 외부의 마찰에 대한 갇힌 운동(confined motion)의 표현법을 컴퓨터 그래픽 운동 방법에 응용 할 수 있도록 한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.251-251
• /
• 2012

A lot of studies are undergoing on the magneto-optical (MO) properties of patterned magnetic systems for the reason that they have potential application to information technology such as ultrahigh-speed computing. Moreover, they can be considered as the future candidates for high-density MO storage devices. Not only the technical aspects, but there have been also tremendous interests in studying their properties related to the fundamental physics. The MO Kerr-rotation effects (both in reflected and the diffracted modes) and the magnetic force microscopy (MFM) are very useful techniques to investigate the micromagnetic properties of such periodic structures. Hence, in this study, we report on the MO properties of bilayered Cobalt (Co)/ nickel (Ni) micro-patterned anti-dot arrays. Such a ferromagnetic structure was made by sequentially depositing co (40 nm)/Ni (5 nm) bilayer on a Si substrate. The anti-dot patterning with hole diameter of $1{\mu}m$ was done only on the upper Co layer using photolithography technique, while the Ni underlayer was kept uniform. The longitudinal Kerr rotation (LKR) of the zeroth- and the first-order diffracted beams were measured at an incidence of $30^{\circ}$ by using a photoelastic modulator method. The external magnetic field was applied perpendicularly to the reflected and the diffracted beams using an electromagnet capable of a maximum field of ${\pm}5$ kOe. Significantly, it was observed that the LKR of the first-order diffracted beam is nearly 4 times larger than that of the zeroth-order beam. The simulated results for the hysteresis loops matched qualitatively well with the experimentally obtained ones. In conjunction with the LKR, we also investigated the magnetic-domain structure by using a MFM system, which were analyzed to elucidate the origin of the enhanced MO rotation.

• 디지털융복합연구
• /
• 제13권7호
• /
• pp.373-380
• /
• 2015

본 연구는 테니스 한손과 양손 백핸드 스트로크 동작에서 하지관절 움직임의 차이를 확인하여 유형별 특성을 밝히는데 그 목적이 있으며 그 결과는 다음과 같다. 볼의 속도를 결정하는 중요한 요인인 라켓헤드의 합성 속도는 양손 백핸드 스트로크 동작이 한손보다 빠른 속도를 나타냈다. 양손 백핸드 스트로크는 하체의 움직임을 최소화시키고 몸통 회전을 통한 스트로크를 하는 반면 한손 백핸드 스트로크는 몸통을 이용한 스트로크를 하기 보다는 공을 쫓아가듯이 스트로크 하는 것으로 나타났다. 슬관절의 신전모멘트는 한손 백핸드 스트로크가 큰 것으로 나타났지만, 내번모멘트와 회내모멘트 그리고 굴곡모멘트는 양손 스트로크에서 크게 나타났다. 고관절의 경우 신전, 내번, 회내 모멘트가 양손 백핸드 스트로크가 한손 보다 모두 큰 것으로 나타났는데 특히 내번모멘트의 경우 큰 차이를 나타난 반면, 외번모멘트는 한손 백핸드 스트로크가 큰 것으로 나타났다.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.61-68
• /
• 2007

The purpose of this study was to analyze the shoulder joint torque and muscle pattern performing as Tennis serve by Isokinetic motions on Isomed 2000. The subject, who was 5 males Korean national high school tennis players. By analyzing the flexion/extension of the shoulder, the peak torque of the internal/external rotation motion(at 60,180 and 300 degree/sec) at peak torque degree, the weight, peak torque, and power. combined with the timing of the electrode of the attached trapezius and posterior deltoid at the three part. From the data analysis & discussion the following conclusions were drawn. When doing a shoulder extension, the peak torque can be widely seen at 60degree per second. However the degree may be different depending on angular velocity. When doing an internal rotation at 90degree abduction, peak torque per weight was seen at 60degree per second. The degree of peak torque was at 31.6-44.2 and peak power was faster when angular velocity was increased. The aspect of muscle pattern was seen more at the internal rotation in the 90degree abduction rather than the shoulder extension. However the angular velocity was not influenced by muscle mobilization(in order of anterior deltoid, posterior deltoid and trapezius. To properly apply the above conclusion, when tennis players serve it is better the elbow be impacted by the extension. when doing isokinetic motion it is better to increase angular velocity and improve muscle power. also the anterior deltoid amongst the shoulder muscle should be improved to develop serve speed.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.176-182
• /
• 2021

Objective: The purpose of this study is to investigate whether the athletic knee show greater rotation and translation movement than non-athletic knee during the treadmill walking with their preferred speed in a complete gait cycle. Method: Thirty young and healthy male subjects participated in the study, fifteen handball players (mean age: 19.6 ± 1.4 years old, mean weight: 85 ± 11.9 Kg, mean height: 179.8 ± 4.7) and fifteen non-athletes (mean age: 22.8 ± 1.2 years old, mean weight: 74.5 ± 8.6 Kg, mean height: 175 ± 5.9). Three-dimensional positional coordinate of lower limb during treadmill walking were analyzed. Results: There were significant differences (t (22.014)=1.585, p=0.127 in the range of internal and external rotation with mean value for handball player (M=14.4513, SD=2.3839) was higher than non-athletes (M=13.3327, SD=1.337). The magnitude of the difference in the means (mean difference=1.11867, 95% CI: -0.34489 to 2.5822) was significant. There were also significant differences (t (17.956)=1.654, p=0.116 in the max abduction and adduction with mean value for handball player (M=5.7160, SD=2.49281) was higher than non-athletes (M=4.5773, SD=0.94667). The magnitude of the difference in the means (mean difference=1.138, 95% CI: -0.30805 to 2.58539) was significant. At significance level 0.05. Conclusion: Finding of this study suggest that to understand the actual characteristic of knee motion studies have to be done in different walking and running trial at variable speed.

• Clinics in Shoulder and Elbow
• /
• 제26권1호
• /
• pp.93-106
• /
• 2023

Reverse total shoulder arthroplasty (RTSA) emerged as a new concept of arthroplasty that does not restore normal anatomy but does restore function. It enables the function of the torn rotator cuff to be performed by the deltoid and shows encouraging clinical outcomes. Since its introduction, various modifications have been designed to improve the outcome of the RTSA. From the original cemented baseplate with peg or keel, a cementless baseplate was designed that could be fixed with central and peripheral screws. In addition, a modular-type glenoid component enabled easier revision options. For the humeral component, the initial design was an inlay type of long stem with cemented fixation. However, loss of bone stock from the cemented stem hindered revision surgery. Therefore, a cementless design was introduced with a firm metaphyseal fixation. Furthermore, to prevent complications such as scapular notching, the concept of lateralization emerged. Lateralization helped to maintain normal shoulder contour and better rotator cuff function for improved external/internal rotation power, but excessive lateralization yielded problems such as subacromial notching. Therefore, for patients with pseudoparalysis or with risk of subacromial notching, a medial eccentric tray option can be used for distalization and reduced lateralization of the center of rotation. In summary, it is important that surgeons understand the characteristics of each implant in the various options for RTSA. Furthermore, through preoperative evaluation of patients, surgeons can choose the implant option that will lead to the best outcomes after RTSA.