• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.1
• /
• pp.23-28
• /
• 2018

Under the 4th Industrial Revolution, implementation of Smart Factory in the field of surface mounting is an emerging issue. In the field of surface mounting, many researches are going on in line with these changes. Among them, we analyzed the method of optimizing the solder printing process which is a core process and the influence of the external factors affecting the printing efficiency. In this analysis, the Big Data provided by the SPI Machine was used to approach the statistical method, and the possibility of predicting the result through simulation with reliable results was confirmed. I hope this study contributes a little to the Smart Factory implementation.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.33-37
• /
• 2012

An HTS racetrack-type coil without turn-to-turn insulation was characterized by critical current, sudden discharge, and over-current tests with respect to external pressures applied to the straight sections of the coil. The thermal stability of the non-insulated HTS racetrack-type coil was remarkably enhanced with increasing external pressure applied to the straight sections of racetrack-type coil. Furthermore, over-current test results confirmed that the non-insulated HTS racetrack-type coil with increased turn-to-turn thermal contact has the potential to be manufactured into field coils of HTS wind turbine generators with highly enhanced thermal and electrical stabilities.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.74-76
• /
• 2006

An external electrode fluorescent lamp (EEFL) has an advantage of a long lifetime in the ear1y stages of the study on plasma discharge, interest in the lamp continues. Researches on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter, EEFL presented the possibility of using it as a light source for back-lights. However, because EEFL generates plasma using wall charges, which considers the impedance characteristics of glass based on the structural principle in discharge, it can be significant1y affected by frequency. Thus, this study verified the change in the characteristics of electromagnetic fields according to the change in frequency through a Maxwell's electromagnetic field simulation and examined the relationship between the change in the EEFL frequency and brightness by measuring the optical characteristics. In addition, the characteristics of the transformation of energy orbits were verified by investigating the characteristics of the wavelength according to the change in frequency through the OES.

• Wind and Structures
• /
• v.13 no.5
• /
• pp.433-449
• /
• 2010

Wind tunnel model tests were conducted for a residential apartment block located within the complex terrain of The Hong Kong University of Science and Technology (HKUST). The test building is typical of medium-rise residential buildings in Hong Kong. The model study was conducted using modelling techniques and assumptions that are commonly used to predict design wind loads and pressures for buildings sited in regions of significant topography. Results for the building model with and without the surrounding topography were compared to investigate the effects of far-field and near-field topography on wind characteristics at the test building site and wind-induced external pressure coefficients at key locations on the building facade. The study also compared the wind tunnel test results to topographic multipliers and external pressure coefficients determined from nine international design standards. Differences between the external pressure coefficients stipulated in the various standards will be exacerbated when they are combined with the respective topographic multipliers.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.74.3-75
• /
• 2019

Recent Integral Field Spectroscopy (IFS) studies revealed that not only late type galaxies (LTGs) but also early type galaxies (ETGs) have various kinds of kinematic rotation. (e.g. not clearly detectable rotation, disk-like rotation, kinematically distinct core (Cappellari 06)) Among the various studies about galactic kinematics, one of the most notable anomalies is the star-gas misalignment. The gas forms stars and stars release gas through mass-loss. In this process, their angular momentum is conserved. Therefore, kinematic decoupling between stars and gas can occur due to external gas inflow or perturbation of components. There are some possible origins of misalignment: cold gas from filaments, hot gas from outer halo, interaction or merging events with galaxies and environmental effects. Misalignment, the black box from mixture of internal and external gas, can be an important keyword for understanding further about galaxies' kinematics and external processes. Using both SAMI IFS data(Sydney-AAO Multi-object Integral field spectrograph Galaxy Survey, Croom+12) and Horizon-AGN simulation(Dubois+14), we examined misaligned galaxies properties and distribution. Because the simulation has lots of galaxies at various z, we were able to study history of formation, evolution and extinction of misalignment, which was hard to be done with observation only.

• 전기의세계
• /
• v.21 no.3
• /
• pp.53-56
• /
• 1972

Electron paramagnetic resonance is one of the concrete forms of magnetic resonance and the superposition of an external magnetic field causes an orientation of the magnetic moment of an atom. On the assumption that both pumped levels be saturated and all relaxation times equal the inversion ratio for a push-pull paramagnetic maser is obtained and compared with those of three-level paramagnetic masers and the magnetic field intensities for 9 and 10 Gc push-pull ruby maser oriented with an angle of 54.deg.44' between the caxis and the magnetic field are, also, obtained.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1436-1437
• /
• 1998

In this paper, the result of experimental investigation into the streaming electrification phenomena of insulating oil under an external dc field effect is described. Energization by positive dc voltage enhanced the streaming electrification. but when the applied voltage was negative, the polarity of streaming current was field strength dependent.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.1
• /
• pp.30-35
• /
• 2017

The effects of the crystallographic orientation and sample thickness on the magnetic levitation forces (F) and trapped magnetic field (B) of single grain YBCO bulk superconductors were examined. Single grain YBCO samples with a (001), (110) or (100) surface were used as the test samples. The samples used for the force-distance (F-d) measurement were cooled at 77 K without a magnetic field (zero field cooling, ZFC), whereas the samples used for the B measurement were cooled under the external magnetic field of a Nd-B-Fe permanent magnet (field cooling, FC). It was found that F and B of the (001) surface were higher than those of the (110) or (100) surface, which is attributed to the higher critical current density ($J_c$) of the (001) surface. For the (001) samples with t=5-18 mm, the maximum magnetic levitation forces ($F_{max}s$) of the ZFC samples were larger than 40 N. About 80% of the applied magnetic field was trapped in the FC samples. However, the F and B decreased rapidly as t decreased below 5 mm. There exists a critical sample thickness (t=5 mm for the experimental condition of this study) for maintaining the large levitation/trapping properties, which is dependent on the material properties and magnitude of the external magnetic fields.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.1003-1006
• /
• 2003

In recent years, FRP plates have been studied for flexural reinforcement of RC structures due to easy installation and good Quality control. This study presents experimental field test results for the effectiveness of flexural reinforcement of the RC slab using external prestressing with thin CFRP strips made by the pultrusion process. It was demonstrated that flexural strength was considerably increased with relatively easy installation when compared to the other methods used for the composite reinforcement.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.144-149
• /
• 2017

This study empirically analyzes the effect of IT SME ventures' external information network diversity on their production period reduction and productivity improvement generated from technology development. This research constructs a mediating model based on the open innovation perspective and tests it with the 138 samples of South Korean IT SME ventures based on the ordinary least squares regression. This research is expected to make a good contribution by shedding a new light on the following three points about the critical role of IT SME ventures' external information network diversity in increasing their production period reduction and productivity improvement generated from technology development which has scarcely been illuminated in the extant studies in the field of the management of technology for SMEs. First, IT SME ventures' external information network diversity positively influences their production period reduction. Second, the external information network diversity positively influences IT SMEs' ventures' productivity improvement. Third, IT SME ventures' production period reduction partially mediates the influence of IT SME ventures' external network diversity on their productivity improvement. These three fresh points are expected to provide useful theoretical and practical implications. Related to the theoretical implication, this research provides a fresh implication that IT SME ventures' external information network diversity positively influences not only their production period reduction but also productivity improvement generated from technology development. Concerning the practical implication, this study suggests that the CEOs in IT SME ventures make strategic efforts to use more diverse external information sources in order to increase their production period reduction and productivity improvement generated from technology development.