• 국제초고층학회논문집
• /
• 제6권1호
• /
• pp.1-9
• /
• 2017

The Pertamina Energy Tower (PET) and Manhattan West North Tower (MWNT) are two supertall towers recently designed and engineered by Skidmore, Owings & Merrill (SOM). The structural system for both buildings consists of an interior reinforced concrete core and a perimeter moment frame system, which is primarily structural steel. As is typical for tall towers with both concrete and steel elements, staged construction analysis was performed in order to account for the long term effects of creep and shrinkage, which result in differential shortening between the interior concrete core and steel perimeter frame. The particular design of each tower represents two extremes of behavior; PET has a robust connection between the perimeter and core in the form of three sets of outriggers, while the perimeter columns of MWNT do not reach the ground, but are transferred to the core above the base. This paper will present a comparison of the techniques used during the analysis and construction stages of the design process with the goal of understanding the differences in structural behavior of these two building systems in response to the long term effects of creep and shrinkage. This paper will also discuss the design and construction techniques implemented in order to minimize the differential shortening between the interior and exterior over the lifespan of these towers.

• Smart Structures and Systems
• /
• 제21권4호
• /
• pp.469-477
• /
• 2018

This paper presents a numerical solution for the thick cylinders made of functionally graded materials (FGMs) with a constant Poisson's ratio and an arbitrary Young's modulus. We define two fundamental solutions which are derived from an ordinary differential equation under two particular initial boundary conditions. In addition, for the single layer case, we can define the transfer matrix N. The matrix gives a relation between the values of stress and displacement at the interior and exterior points. By using the assumed boundary condition and the transfer matrix, we can obtain the final solution. The transfer matrix method also provides an effective way for the solution of multiply layered cylinder. Finally, a lot of numerical examples are present.

• 대한수학회지
• /
• 제49권6호
• /
• pp.1229-1257
• /
• 2012

We study the relation between an R-Cartan structure ${\alpha}$ an an (I, J, K)-generalized Finsler structure ${\omega}$ on a 3-manifold ${\Sigma}$ showing the difficulty in finding a general transformation that maps ${\alpha}$ to ${\omega}$. In some particular cases, the mapping can be uniquely determined by geometrical conditions. Moreover, we are led in this way to a negative answer to our conjecture in [12].

• 한국수학사학회지
• /
• 제22권2호
• /
• pp.13-26
• /
• 2009

엘리 카르탕은 20세기 기하학과 대수학의 한 획을 그은 업적을 낸 수학자이다. 이 논문에서 우리는 소수의 전문가에게는 친숙하지만 일반적으로는 생소한 그의 업적을 조명해 보고 그 영향을 알아본다.

• 한국군사과학기술학회지
• /
• 제26권1호
• /
• pp.1-9
• /
• 2023

The skin structure of sensor pod mounted on the exterior of aircraft can be exposed to the acoustic dynamic load and static load such as aerodynamic pressure and inertial load during flight. Fatigue life prediction of structural model under acoustic load should be performed and also differential stiffness of model modified by static load should be considered. The acoustic noise test spectrum of MIL-STD-810G was applied to the structural model and the stress response power spectral density (PSD) was calculated. The frequency response analysis was performed with or without prestress induced by inplane static load, and the response spectrum was compared. Time series data was generated using the calculated PSD, and the time and frequency domain fatigue life were predicted and compared. The variation of stress response spectrum due to static load and predicted fatigue life according to the different structural model considering mean stress were examined and decreasing fatigue life was observed in the model with prestress of compressive static load.