• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.283-285
• /
• 2013

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.129-137
• /
• 2000

The powertrain is an important factor for the interior and exterior noise behavior of the vehicle Thus, the noise vibration and harshness(NVH) behavior of an engine is becoming a major target of the powertrain development. This paper describes the analyses with the aim to reduce the vibration and noise of an advanced inline 4-cylinder diesel engine block by use of CAE methods. The characteristics of an engine block as a main excitation source of car interior noise is studied. Particularly, The effect of balance shaft to reduce the 2nd order engine excitation force is calculated by forced vibration and radiated noise analysis. The engine exitation forces are obtained under real operating conditions. It is shown that the reduction of vibration and noise level by adapting blancing shaft is well predicted and rediated noise is directly related to the surface velocity of engine block.

• KIEAE Journal
• /
• v.17 no.2
• /
• pp.29-34
• /
• 2017

Purpose: Recently, significant heat loss through the window takes place in buildings. Nevertheless, there exists little literature concerning the exterior horizontal shading devices and the design criteria are not clearly settled yet. Applying the exterior horizontal shading devices is more efficient as compared to the interior shading devices in that solar radiation can be directly blocked before passing through the window or the envelope. The purpose of this study is to reduce the internal load by designing the exterior horizontal shading devices and verify the degree of reduction in energy consumption. Method: This study aims to reduce energy consumption in cooling and heating through proposing proper length and shape of the exterior horizontal shading devices in public buildings. In the process, actual energy data and the Design Builder simulation program are utilized. In addition, economic aspect is considered to figure out the optimal length of the exterior horizontal shading devices that maximizes efficiency. Result: As a result, the proper length and shape of the exterior horizontal shading devices are provided as follows: 1) Energy consumption in cooling and heating is minimized when the exterior horizontal shading devices are designed as 0.5m*2. 2) Electricity bill is the lowest when the exterior horizontal shading devices are designed as 3.3m*2. The gap between maximum and minimum electricity bill is about 7.8~14%.

• Journal of Sasang Constitutional Medicine
• /
• v.16 no.2
• /
• pp.52-57
• /
• 2004

1. Objectives In ShinChukbon "DongyiSuseBowon", there are many contents of constitutional diseases and symptoms. The aim of the present study was to investigate recognition of sleep as Dong-Mu's constitutional symptoms. 2. Methods In ShinChukbon "DongyiSuseBowon", I found contents about sleeping and made comparative study of acquired contents. And I made comparative of previous studies. 3. Results (1) I concluded that Soumin who has interior and exterior diseases didn't get sleep well. Under the condition that constitutional diseases are cured, Soyangin gets to sleep well. (2) I concluded that Soyangin who has interior and exterior diseases sleep lesser than ordinary symptoms. Under the condition that constitutional diseases are cured, Soyangin gets to sleep well. (3) I concluded that Taeumin who has interior diseases sleep lesser than ordinary symptoms. Under the condition that constitutional diseases are cured, Taeumin gets to sleep well. (4) I concluded that Taeang who has constitutional disease may sleep lesser than ordinary symptoms. But not confirmed. 4. Conclusions There is some ground that sleep as constitutional symptom would be a good authority of checking constitutional disease.

• Journal of architectural history
• /
• v.22 no.6
• /
• pp.7-22
• /
• 2013

The purpose of this paper is to study on the spatial characteristics from the "The Holy Trinity" fresco painted by Masaccio in the early Renaissance paintings. The results of this study are as follows. 1. The elevation composition of the "The Holy Trinity" fresco is divided into the upper and lower structure through horizontal axis on horizontal line around vanishing point. The upper structure is composed of vertical axis formed through the disposition of the "Trinity" elements and horizontal axis on horizontal line. The lower structure is composed of the sarcophagus and skeleton in such inside and the altar supported through circular columns of left and right. 2. The section composition of the "The Holy Trinity" fresco is composed of the ceiling structure of cylindrical-shaped vault on upper part around basic square floor plan that is interior space and upper structure. The exterior space and lower structure is placed with sarcophagus in inner part that altar and step is projected as same height and width in the outside direction. 3. The basic floor composition of the "The Holy Trinity" fresco is planned by square shape around structural columns that is placed at corners as symmetry through transverse, longitudinal and diagonal axis. The whole floor composition planned through the altar and step that is in exterior space at front, the apse of round form at rear part and the structure of the middle story concept at interior. 4. The visual aspect of the "The Holy Trinity" fresco is composed of the stable balance in relation with distance and height because the interior and exterior space as well as the upper structure and lower structure is formed by regular proportion system. The elevation angle of visual range was planned to view in detail generally or partially the architectural composition system and element, characters through proper visual distance, center and position.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.446-457
• /
• 2017

This study surveys the usage and satisfaction of car seat covers, analyzes the satisfaction and luxuriousness of materials used and provides basic data on optimum car seat covers that improve consumer satisfaction, stability, and comfort, while driving. The survey was conducted on 150 people in their 20s to 60s with a car. Consequently, achromatic colored car seat covers were used most and the satisfaction with black was very high. Interior & exterior harmony and the pursued car image were considered important, this consumer psychology impacted the color selection for car seat covers. The satisfaction reasons were different according to materials. Genuine leather was highly regarded in interior & exterior harmony (20.8%), excellent seat sensation (17.7%), excellent tactile sensation (11.5%), and luxuriousness (8.5%). For artificial leather, interior & exterior harmony (16.5%) and easiness of stain removal (13.6%) was rated high and fabric had excellent seat sensation (12.3%) and economics (10.8%). The material, heated and ventilated device affected car seat cover satisfaction. The luxurious image of car seat covers was pursed and was perceived mainly with a sense of sight. Luxury car seat covers were mainly created with materials. Genuine leather and black car seat covers increased luxuriousness. For car seat covers, those with flexibility, excellent compressive elasticity, and thickness were perceived as luxurious.

• Journal of Korean Medical classics
• /
• v.32 no.2
• /
• pp.33-47
• /
• 2019

Objectives : To review the meaning of Open-Close-Pivot and its transition over time. Methods : Annotations and explanations in chapters where the theory of Open-Close-Pivot originated from in the "Suwen(素問)" and "Lingshu(靈樞)" were examined, followed by philological examination of key physicians. Results & Conclusions : Yang Shang Shan(楊上善) compared the 'Open-Close-Pivot' to a door. Wang Bing(王冰) explained it's movement and stillness to be the principle behind the Three-Yin-Three-Yang's threefold division. Wang Ji(汪機), in "XuSuwenChao(續素問鈔)" explained its physiological function as the entering and exiting of Ying Wei(營衛), and its scope to be exterior, interior, and center. Ma Shi(馬蒔) stratified it similar to "Shanghanlun(傷寒論)"'s six stages, while Wu Kun(吳崑) categorized Shaoyang(少陽) as being in-between exterior and interior. Zhang Jing Yue(張景岳) suggested a standard for the entering-exiting and exterior-interior-center concepts of the Open-Close-Pivot. Zhang Zhi Cong(張志聰) argued a theory of Open-Close-Pivot that emphasized the meaning of Three-Yin-Three-Yang, while Gao Shi Zong(高士宗) explained the relationship between Open, Close, Pivot and the functioning process. Shi Shou Tang(石壽棠) explained the physiology and pathology in the actions among Open-Close-Pivot with a focus on Pivot. Ke Qin(柯琴) applied Open-Close-Pivot to "Shanghanlun(傷寒論)" and used it as the basic principle to the Six Channel Ground Theory(六經地面說), also clinically applying it in the identification and treatment of the Six Channel patterns. Conclusions : Counting based word embedding methods seems to be more effective than.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.936-939
• /
• 2004

In this paper a comparison of the initial rotor position estimation methods by two type search coils for switched reluctance motor(SRM) is presented. The experimental results of the two methods show that the interior central pole search coil method has better performance than the exterior pole search coil method. The reason of the discrepancy in performance is described.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.50-55
• /
• 2018

The important thing in extrusion technology is the design and production of molds. Appropriate design of the molds is essential for achieving the desired extrusion of molds at the same time to maximize the life of the molds and increase their efficiency. The extrusion temperature and extrusion speed are the main parameters at the time of extrusion. Different extrusion conditions should be added depending on the extrusion ratio, physical properties of the material, and type of extrusion. In this study, the extrusion process of various 6xxx series aluminum cast alloys for high speed train interior or exterior parts were investigated. The extruded die design was performed for the 6063, 6061, 6N01, 6005, 5083 and 6060 alloy profiles and an extrusion test was conducted. In addition, the extrusion conditions, such as extrusion pressure following as the billet temperature, extrusion temperature, and materials change, were analyzed. Although the 6063 aluminum alloy can be extruded at the lowest temperature and pressure, the 6061 alloy can be extruded at the highest temperature and pressure. From these results, the successful extruded products were manufactured from these established conditions.

• Steel and Composite Structures
• /
• v.26 no.3
• /
• pp.329-345
• /
• 2018

This paper systematically investigated the mechanical performance of the weak-axis cover-plate connection, including a beam end monotonic loading test and a column top cyclic loading test, and a series of parametric studies for exterior and interior joints under cyclic loading using a nonlinear finite element analysis program ABAQUS, focusing on the influences of the shape of top cover-plate, the length and thickness of the cover-plate, the thickness of the skin plate, and the steel material grade. Results showed that the strains at both edges of the beam flange were greater than the middle's, thus it is necessary to take some technical methods to ensure the construction quality of the beam flange groove weld. The plastic rotation of the exterior joint can satisfy the requirement of FEMA-267 (1995) of 0.03 rad, while only one side connection of interior joint satisfied ANSI/AISC 341-10 under the column top cyclic loading. Changing the shape or the thickness or the length of the cover-plate did not significantly affect the mechanical behaviors of frame joints no matter in exterior joints or interior joints. The length and thickness of the cover-plate recommended by FEMA 267 (1995) is also suitable to the weak-axis cover-plate joint. The minimum skin plate thickness and a design procedure for the weak-axis cover-plate connections were proposed finally.