• 한국정보통신학회논문지
• /
• 제11권2호
• /
• pp.257-264
• /
• 2007

사진을 찍을 때 카메라는 보기 좋은 사진을 얻을 수 있도록 많은 기능을 제공하고 있다. 대표적인 기능으로 자동 초점거리 조정(Auto Focus), 자동 색온도 보정(Auto White Balance), 자동 노출 조정(Auto Exposure)이 있다. 본 논문에서는 편리한 기능들 중 하나로서 새로운 자동 노출제어 시스템을 제안한다. 본 논문에서 제안하는 자동 노출제어 시스템은 가변 시상수(Variable Time Constant)를 가지는 IIR Filter를 이용한다. 먼저 노출제어의 기준을 정하기 위해서 사진에서 밝기변화와 Zone System에서 보여주는 사물의 휘도정보를 비교하여 이상적인 휘도변화 특성 그래프를 얻는다. 얻어진 이상적인 휘도 변화 그래프와 현재의 노출설정을 비교하여 적정 노출의 설정을 찾는다. 제안하는 자동 노출제어 시스템은 적정 노출을 얻을 수 있는 설정으로 조정하기 위해 기존의 마이크로 콘트롤러 등을 이용하여 구현하는 방법과 달리 IIR Filter를 사용하므로 간단한 구성을 가지며 콤팩트 이미지 센서모듈(ISM)를 구성하기 위하여 사용할 수 있다.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.467-474
• /
• 2014

The aim of this paper is to describe a relatively recent international agreement on the widely debated concepts of: (i) attributing effects to low dose radiation exposure situations that have occurred in the past and, (ii) inferring radiation risk to situations that are planned to occur in the future. An important global consensus has been recently achieved on these fundamental issues at the level of the highest international intergovernmental body: the General Assembly of the United Nations. The General Assembly has welcomed with appreciation a scientific report on attributing health effects to radiation exposure and inferring risks that had been prepared the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) following a formal request by the General Assembly.

• 한국기계가공학회지
• /
• 제18권9호
• /
• pp.7-16
• /
• 2019

According to KGS FS551, the safety of an exposure pipe system should be calculated quantitatively by calculating the stress of exposed piping for thermal expansion. However, many pipe system designs and installation sites are not equipped for this. Therefore, KGS FS551 suggested the use of safe gas by presenting the recommended pipe shape. The shapes of various pipe systems have been derived. However, the recommended shape could not be an absolute evaluation standard. Furthermore, the ongoing debate over standards between a plumbing installer and an inspector is an obstacle to the efficient and safe use of gas. Therefore, the correct pipe system evaluation method is examined in this study, and the safety of the existing exposed pipe system is verified.

• 의료법학
• /
• 제14권2호
• /
• pp.119-142
• /
• 2013

It is not easy to regulate the amount of radiation used for the medical purpose as there usually is more good than harm to the patient's health and life caused by the medical exposure to the radiation. However, the rapid increase of the use of diagnostic radiation involves a high possibility of increasing the radiation hazard exposure. Therefore, it is imperative to implement effective regulations in order to secure the safety of diagnostic radiation. The one and only rule we currently have for the diagnostic radiation is "Medicine Act" with only one clause dedicated to regulate the safety management that does not include any rules for the medical radiation. A set of inclusive rules for the whole medical radiation inclusive of diagnostic radiation and therapeutic radiation need to be based on the "Medicine Act" rather than "Nuclear Safety Act" in order to protect the medical professionals, patients and the guardians of patients from the hazards of diagnostic and/or therapeutic radiation that was not used the purpose of medical treatment. If there is an administrative measure to be imposed to secure the safety of diagnostic radiation, it is considered as exertion of governmental authority of administrative agency. There must be clear and realistic legal guidelines for in-fringe on people's interests. The administrative measures for the safety management of the diagnostic radiation must be clearly and specifically based on the law and the detailed standards for the administrative measures must be dele-gated by the presidential decree or departmental ordinance. Accordingly, the restrictions imposed by the administrative measures to the "Safety Inspection Institute of Radiation along with Radiation Exposure Measuring Institutes" should have clear legal basis as well and the detailed standards for the administrative measures should be regulated by the Ministry of Health and Welfare decree instead of the notification by the Director of Korean Centers for Disease Control and Prevention. While securing the safety of radiation on one side, careful review and up-grade on our legal system for the safety management of the diagnostic radiation is required on the other side to guarantee the legality, interest balance and reliability of the administrative measures.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.687-697
• /
• 1998

최근 국내 전력설비에서 발생하는 전자계에 대한 관심이 증가하고 있지만 이에 대한 정확한 자료 파악은 극히 미미한 실정이다. 본고에서는 송전선로에서 발생하는 전계와 자계의 수준을 알아보기 위하여 전국 1537H의 송전 선로를 대상으로 전계와 자계를 측정하였다. 측정 지점의 전계와 자계 최대치들의 중간값은 각각 0.47 kV /m, 11.6 mG 최고 값은 각각 3.16 kV /m, 125 mG로 나타났으며, 전세계의 전자계 관련 권고치나 기준치에 비해 낮은 값임을 알 수 있었다. 아울러 몇 가지 경우에 대하여 가전제품에서 발생하는 자계와 일일 자계 노출량올 측정 하였고 이를 송전선로의 자계 크기와 비교하였다.

• Elastomers and Composites
• /
• 제55권4호
• /
• pp.270-276
• /
• 2020

The long-term durability of an FKM O-ring used as parts of a hydrogen station was investigated by exposing it to high-pressure gaseous hydrogen for 1, 3, and 7 days at room temperature. Changes in its sealing force were subsequently measured at 150℃ using intermittent compression stress relaxation (CSR). No changes in the tensile properties of FKM O-ring were observed, but its initial and overall sealing forces at 150℃ significantly decreased with increasing exposure time to hydrogen gas. Microvoid formation in the FKM O-ring upon exposure to high-pressure hydrogen was minimized over time after the ring was exposed to atmospheric pressure at room temperature, which prevented changes in its tensile properties. However, applying heat accelerated FKM O-ring oxidation, which decreased its sealing force. These results indicated that identifying changes in the sealing force of rubber materials using intermittent CSR is not sufficient for monitoring changes in mechanical properties under high-pressure hydrogen atmospheres; however, it is suitable for evaluating the long-term durability of sealing materials for hydrogen station applications under similar conditions.

• Safety and Health at Work
• /
• 제13권4호
• /
• pp.487-492
• /
• 2022

Objective: The exposure levels of disease-causing bacteria and germs were assessed on aircraft cleaning workers on multiple different aircrafts. Method: Five measuring points were selected depending on the aircraft types. Four aircraft cleaning agencies were selected for the test. Aircraft cleaning work was classified as intensive cleaning and general cleaning work. Ventilation in aircraft when sampling during the cleaning operation was categorized into forced ventilation and natural ventilation. The collection of airborne microorganisms was made through inertial impactors which were installed 1.5 meters above the bottom of the aircraft. The airborne bacteria and fungus growth badges were selected by Trytpic Soy Agar and Sabouraud Dextrose Agar. Results: The average concentrations of bacteria in the air were higher in the order of small, medium, and large airplanes. Rainy days had higher concentrations inside and outside the aircraft as compared to those in sunny days. Regarding ventilation, concentrations in natural ventilation were higher than concentrations in forced ventilation. According to the type of work, the concentrations in the intensive cleaning groups (cleaning one plane a day) were lower than those of the ordinary cleaning groups (cleaning several planes per day). Conclusion: The concentration levels of airborne bacteria and fungi in the aircraft surveyed were lower than the indoor environmental standards of Korea (800 cfu/m³ and 500 cfu/m³). The average concentrations of bacteria in the air and fungi in the air were highest in small aircraft owned by Company D.

• Environmental Engineering Research
• /
• 제13권1호
• /
• pp.14-18
• /
• 2008

Photocatalytic oxidations of benzene gas using the closed system (batch reactor) were induced to determine its by-products and investigate the effect of humidity and oxygen concentration on their generation. The study was able to identify 11 gaseous by-products: 2-methylpropene, acetaldehyde, acetone, pentane, methylcyclobutane, methylcyclopentane, cyclohexane, 2,3-dimethylbutane, 2-methylpentane, 3-methylpentane, and hexane. All the by-products were saturated hydrocarbons, which are less toxic than benzene and were probably formed through hydrogenation reaction on the photocatalytic surface. The photocatalytic oxidation of benzene under higher humidity produced less by-products. However, the amount of acetone released increased with higher humidity and oxygen concentration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.141-144
• /
• 2004

Nowadays, there has been substantial interest in whether there is an association between electromagnetic field exposure and living environment. It is increased the demand that electromagnetic wave environment and its countermeasure. In the present study, we has applied the electromagnetic absorbent inorganic paint of 'I' corporations, and measured electromagnetic waves generated in new apartment before occupancy using the standard field electromagnetic wave generating device we developed. The measurement before occupancy was $100\~131V/m$, but the measurement after occupancy was $6.9\~8.0V/m$ less than 10V/m, the comprehensive electromagnetic wave limit allowed by TCO in Sweden. The implication is that domestic apartment are exposed to extremely poor electromagnetic wave environment. Nevertheless, there have been neither serious efforts to overcome this problem, nor its alternatives and related standards. Therefore, it is necessary to continue research of related fields to establish standards and plans to improve the situation.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1577-1586
• /
• 2018

The emergence of the Smart Grid is an integrated solution for the next generation power system that combines IT technology in the power system to create optimal energy utilization and various services. However, these convergence technologies (power systems and information communications) are not only improving the related technologies but also producing various problems especially exposure to cyber risk. In particular, the intelligent power grid has security vulnerabilities through real-time information sharing among various organically linked systems, and it is more complicated than the cyber risk problem in the existing IT field and is directly connected to national disaster accidents. Therefore, in order to construct and operate a more stable smart grid, this paper analyzes the system of power system control system in Korea, and proposes a cyber security element definition and a countermeasure establishment method of power monitoring & control systems based on security standards of smart grid (No. SPS-SGSF-121-1-1).