• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.230-240
• /
• 2015

An IOM sampler equipped with glass fiber filter has been recently utilized instead of solid adsorbent, which was used to measure the inhalation exposure of agricultural operator to pesticides. The aim of this study is to validate the efficacy of an IOM sampler by measuring the trapping efficiency and breakthrough using kresoxim-methyl water-dispersible granule and fenthion emulsifiable concentrate. On LC-MS/ MS, minimum detection level was 12.5 pg and method limit of detection was 5.0 ng/mL. Good linearity ($R^2$ > 0.999) for matrix matched standards was obtained. Recoveries of pesticides from glass fiber filter were 102-109% (kresoxim-methyl) and 97-104% (fenthion) while those from XAD-2 resin were 94-98% (kresoxim methyl) and 93-100% (fenthion). Trapping efficiency test was performed with personal air pumps and IOM sampler (glass fiber filter) connected with solid adsorbent (XAD-2 resin) with two types of formulation (solid and liquid) which were diluted by standard rate and sprayed to IOM sampler. Those pesticides were trapped only in glass fiber filter without any breakthrough to solid adsorbent. After spiking of pesticides to glass fiber filter, breakthrough test was carried out with IOM sampler (glass fiber filter) which was connected with solid adsorbent. As a results, 87-101% of kresoxim-methyl and 96-105% of fenthion remained in spiked glass fiber filter, however, no pesticides were detected in second glass fiber filter and solid adsorbent. In conclusion, IOM sampler which equipped with glass fiber filter can be applied widely for pesticide inhalation exposure study since it has good trapping efficiency and adsorption capacity, regardless of the solid or liquid formulation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.4
• /
• pp.236-243
• /
• 1991

A field experiment was conducted during the growing season of 1985 to determine the effects of slope orientation, north and south facing exposures and three different altitudes, 800, 1,000 and 1,200m a.s.1. on the dry matter yield, forage quality and botanical composition of alpine pasture. 1. Total dry matter yield of alpine pasture was influenced by slope orientation and altitude. An average forage yield of both exposures at 1,000m a.s.1. was 9,301kg/ha compared with 10,274kg/ha at 800m a.s.1. and the productivity express in relative percentage decreased by 9.5% per 200m attitudinal increase. 2. An average forage yield of both altitudes, 800 and 1,000m a.s.1. on the south facing exposure was 21.5% higher than that on the north exposure. 3. Crude protein concentration of forage grown on both exposures was lowest at 800m a.s.1. increasing gradually as the altitude increased, but crude fiber concentration decreaced in a manner opposite to that of crude protein. 4. Forage grown on the north facing exposure had a higher concentration of crude protein than that grown on the south facing exposure at the same altitude, but lower concentraion of crude fiber. 5. Orchardgrass and timothy were two main species on both exposures at 800m a.s.1. but timothy was only dominant species at 1,000 and 1,200m a.s.1. and performed well up to 1,200m a.s.1. in alpine area. The economic production limit of orchardgrass would be about 800m a.s.1. in the alpine pasture. 6. No soil property differences were found between the north and south facing exposures as well as three different altitudes in the alpine pasture. It seemed that the previous pasture fertilization of the experimental field completely overshadowed any soil property differences from slope orientation and altitude.

• Journal of Yeungnam Medical Science
• /
• v.14 no.2
• /
• pp.314-328
• /
• 1997

A cross-sectional study was performed to evaluate the effects of chronic exposure to low-dose solvent on neurobehavioral performance of 48 male workers exposed to organic solvents. A control group of 50 workers was selected from same factories. Each worker completed a medical and occupational questionnaire and four tests of Neurobehavioral Core Test Battery. These included Benton visual retention test, digit symbol, digit span, and pursuit aiming. Comparison of mean performance showed a significantly poorer performance on digit symbol, digit span, and pursuit aiming. In univariate analysis, age contributed to poor performance on Benton visual retention test and educational level was found to reduce the performance on symbol digit in both groups. Amount of alcohol intake was found to reduce the performance on digit symbol and smoking appeared to slow pursuit aiming in the exposure group. In multiple regression analysis, controlling for age, educational level, alcohol, and smoking, Solvent exposure was found to be associated with performance of digit span, and number of correct dot of pursuit aiming. Age on Benton visual retention, educational level on digit symbol, arid smoking on pursuit aiming were found to be a significant factors on each test items. This study suggest that short-term memory, and perception can be affected easily by chronic exposure of organic solvents which air concentration levels were under the Threshold Limit Value.

• Clean Technology
• /
• v.18 no.2
• /
• pp.200-208
• /
• 2012

This study was performed to prevent the health damage of environmental contaminants in Industrial Complex Area. And, this study aimed to identify the concentration levels and distribution characteristics of environmental contaminants and Polycyclic Aromatic Hydrocarbons (PAHs) at soil in Industrial Complex Area and control area. The concentration of the soil pollution standard such as the heavy metals in the soil, VOCs, PAHs, and PCB were measured and analyzed using the soil specimens in the Industrial Complex Area and control area. Soil specimens from the Industrial Complex Area (the direct exposure area) and the control area were surveyed. Songdo-dong, Haedo-dong and Jechul-dong, which are in the direct exposure area and near the emission source, showed relatively high concentrations of contaminant materials when compared with Jangki-myeon, which is far off and in the control area. The concentration of zinc was 20.8-58.9% of the level of concern (300 mg/kg) in the 1st region, which is a relatively high concentration. The concentration of fluoride was under the standard in every region, but it was about 74% of the level of concern (400 mg/kg) in the 1st region. It is recommended that controlling fluoride emissions is necessary. Levels of organic phosphate, phenol, and VOCs like benzene, toluene, ethylbenzene and xylene were under the detection limit of the analysis instruments. The concentration of TPH was high in Songdo-dong. The concentration of contaminants in Jechul-dong was high. In addition, it was observed that the level of soil contamination changed depending on the distance from the emission source. The concentration of PAH compounds in the soil was 18.71-1744.59 ng/g, and the concentration of six potential cancer-causing PAH materials was 6.54-695.94 ng/g. The highest concentration was in Songdo-dong. The PAH concentration in the direct exposure area near the complex was relatively high compared to the indirect exposure area.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.425-435
• /
• 2014

Objectives: This study was performed in order to establish reliable and relative selection criteria for hazardous substances requiring management(HSRM) in the Occupational Safety and Health Act in Korea. Methods: To determine the relative criteria and weight of evidence for HSRM, we analyzed the difference between the selection method of priority substances in studies by KOSHA(Korea Occupational Safety and Health Agency) and the European Union Risk Ranking Method(EURAM). In addition, 597 hazardous substances with exposure limit valueswereanalyzed and the posted health hazards classification by MOEL(Ministry of Employee and Labor), MOE(Ministry of Environment), and EU CLP(Classification, Labelling and Packaging regulation) were compared based on GHS(Globally Harmonized System of classification and labelling of chemicals) criteria. The existing HSRM(167 substances) were evaluated for suitability by the proposed criteria in this study. Results: As a result of this study, the criteria and procedures for selecting HSRM in the Occupational Safety and Health Act were arranged utilizing GHS health hazard classification results, occupational disease cases and domestic use situations. Conclusions: The applicability of the proposed criteria was proved via the evaluation of existing HSRM(167 substances). Most HSRM (161 substances) were found to correspond to a significant health effect or substantial health effect. The question of whether to include the six substances that have been found to have general health effects as HSRM would be require further research.

• Safety and Health at Work
• /
• v.3 no.1
• /
• pp.58-66
• /
• 2012

Objectives: The purpose of this study was to review clinical characteristics and working environments of sudden cardiac death (SCD) cases associated with a tire manufacturer in Korea, and review possible occupational risk factors for cardiovascular disease including nanoparticles (ultrafine particles, UFPs). Methods: We reviewed (i) the clinical course of SCD cases and (ii) occupational and non-occupational risk factors including chemicals, the physical work environment, and job characteristics. Results: Possible occupational factors were chemicals, UFPs of rubber fume, a hot environment, shift work, overworking, and noise exposure. The mean diameter of rubber fume (63-73 nm) was (larger than diesel exhaust [12 nm] and outdoor dust [50 nm]). The concentration of carbon disulfide, carbon monoxide and styrene were lower than the limit of detection. Five SCD cases were exposed to shift work and overworking. Most of the cases had several non-occupational factors such as hypertension, overweight and smoking. Conclusion: The diameter of rubber fume was larger than outdoor and the diesel exhaust, the most well known particulate having a causal relationship with cardiovascular disease. The possibility of a causal relation between UFPs of rubber fume and SCD was not supported in this study. However, it is necessary to continue studying the relationship between large sized UFPs and SCD.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.446-464
• /
• 2015

Objectives: This study was conducted to evaluate the task-specific hazards of chemicals used by nail technicians in Daegu Metropolitan City. Materials: A total of 30 nail shops located in Daegu City were surveyed to investigate the major tasks and practices performed by nail technicians and the ingredients listed in nail care products used in shops. We also collected instructions for use and material safety data sheets(MSDSs) of nail care products and compared CAS Nos. of ingredients with the lists of chemicals regulated by the Industrial Safety and Health Act(ISHA) and Chemical Substances Control Act(CSCA). Results: A total of 125 chemical ingredients were found in 468 nail care products used at the 30 nail shops. The most frequently found ingredients were ethyl acetate(72%), followed by n-butyl acetate(71.8%), isopropanol(56%), benzophenone(51.1%), nitrocellulose(46.4%) and ethanol(45.3%). Comparing six tasks, the task of manicuring used the most products at 222 products containing 91 ingredients. Among the 125 ingredients, there are 31 chemicals with occupational exposure limits(OEL) designated by the Ministry of Employment and Labor(MoEL), eight categorized as carcinogens, one mutagen and two reproductive toxic chemicals. In terms of carcinogens, formaldehyde was identified as the only confirmed human carcinogen(1A). We found that there was one chemical with a permissible limit, one special management substance, 18 workplace monitoring substances and ten special health diagnosis substances regulated by ISHA. For CSCA, nine poisonous substances, six substances requiring preparation for accidents and one restricted substance were identified. Conclusions: Based on these findings, formaldehyde was identified as one of the chemicals that should most strictly be controlled for the protection of the health of nail technicians and customers. At the same time, it is necessary to distribute materials with detailed hazardous information of nail care products for nail shop technicians.

• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.555-564
• /
• 2020

Objectives: To identify and investigate through qualitative and quantitative analysis the hazardous substances generated when compressed wood was burned at a live fire-training center. Methods: Four types of compressed wood that are actually used in live fire training were burned in a chamber according to KS F2271. The gaseous material was sampled with a gas detector tube and conventional personal samplers. Results: 1,3-butadiene, benzene, toluene, xylene, formaldehyde, hydrogen chloride, hydrogen cyanide, ammonia, carbon monoxide, and nitric acid were detected. In particular, 1,3-butadiene (497.04-680.44 ppm), benzene (97.79-125.02 ppm), formaldehyde (1.72-13.03 ppm), hydrogen chloride (4.71-15.66 ppm), hydrogen cyanide (3.64-8.57 ppm), and sulfuric acid (3.85-5.01 ppm) exceeded the Korean Occupational Exposure Limit as measured by sampling pump according to the type of compressed wood. Conclusions: We found through the chamber testing that firefighters could be exposed to toxic substances during live fire training. Therefore, firefighter protection is needed and more research is required in the field.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.69-79
• /
• 1999

The research and implementation was preformed on high-resolution CCTV camera with CCD exclusive DSP conventional analog signal processor CCTV camera has its limit on auto exposure(AE), auto white balance(AWB), back light compensation(BLC) processing, severe distortion and noise of image, manual control parameter setting, etc. In our study, to resolve the problems in conventional CCTV camera, we made it possible to control AE, AWB, BLC automatically by the use of the DSP, which are used exclusively in the CCD camera produced domestically, and the microcontroller. And we utilized the function of screen display of microcontroller for the user-friendly interface to control CCD camera. And the electronic variable resister(EVR) was used to avoid setting parameters manually in the level of manufacturing process. As the result, It became possible to control parameters of the camera by program. And the cost-down effect was accomplished by improving the reliability of parameter values and reducing the efforts in setting parameters.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.440-449
• /
• 1994

Current risk assessment practices largely reflect the need for a consistent set of relatively rapid, first-cut procedures to assess 'plausible upper limits' of various risks. These practices have important roles to play in 1) screening candidate hazards for initial attention and 2) directing attention to cases where moderate-cost measures to control exposures are likely to be warranted, in the absence of further extensive (and expensive) data gathering and analysis. A problem with the current practices, however, is that they have led assessors to do a generally poor job of analyzing and expressing uncertainties, fostering 'One-Number Disease' (in which everything from one's social policy position on risk acceptance to one's technical judgment on the likelihood of different cancer dose-response relationships is rolled into a single quantity). At least for analyses that involve relatively important decisions for society (both relatively large potential health risks and relatively large potential economic costs or other disruptions), we can and should at least go one further step - and that is to assess and convey both a central tendency estimate of exposure and risk as well as our more conventional 'conservative' upper-confidence-limit values. To accomplish this, more sophisticated efforts are needed to appropriately represent the likely effects of various sources of uncertainty along the casual chain from the release of toxicants to the production of adverse effects. When the effects of individual sources of uncertainty are assessed (and any important interactions included), Monte Carlo simulation procedures can be used to produce an overall analysis of uncertainties and to highlight areas where uncertainties might be appreciably reduced by further study. Beyond the information yielded by such analyses for decision-making in a few important cases, the value of doing several exemplary risk assessments in. this way is that a set of benchmarks can be defined that will help calibrate the assumptions used in the larger number of risk assessments that must be done by 'default' procedures.